ページ1に含まれる内容の要旨
26HF5443
32HF7443
Instruction for Use
ページ2に含まれる内容の要旨
Care of the screen Do not touch, push, rub or strike the screen with anything hard as this may scratch or damage the screen permanently. Do not rub with chemically treated cloth. Do not touch the surface with bare hands or greasy cloth. Unplug the TV before cleaning the screen. When the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like chamois. Do not use acetone, toluene and alcohol because they cause chemical damage. Do not use liqu
ページ3に含まれる内容の要旨
Make sure that air can circulate freely through the ventilation slots To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed on or in the vicinity. Avoid heat, direct sunlight and exposure to rain or water. The equipment should not be exposed to dripping or splashing and no objects filled with liquids, such as vases, should be placed on it. Insert the aerial plug firmly into the aerial socket at the bottom rear of the TV. Connectin
ページ4に含まれる内容の要旨
Accessing the Set-up Menu When the set is in the High Security Mode, the Setup menu can be accessed only by the Institutional Set-up Remote Control (RG4172BK or RC2573) by pressing the M key. The Institutional Set-Up Remote Control is available as an option. When the set is in the Standard Security Mode the Set-up Menu may be accessed with the standard guest remote control (RC2887) by a sequence of commands (3 1 9 7 5 3 MUTE). RC2887
ページ5に含まれる内容の要旨
Navigation The current menu item can be selected by means of the Up/Down keys. Submenus can be accessed from menu items indicated with a “>” symbol by pressing the Right key. • To exit any menu press “Menu” button • Select “YES” to activate/enable a setting, “NO” to deactivate/disable. • TELEVISION up/down, INFO up/down, PAY-TV up/down and RADIO up/down are active in Setup menu mode and the television reacts the same way as in TV mode.
ページ6に含まれる内容の要旨
• Language: Select the language of the installation menu. Options are "ENGLISH", "MELAYU" and “CHINESE” Note: The Chinese Language is for the Guest Menu only. • Communication: The Communication options SP-SPI, SP-IC2, HM-Link and Multi RC. SP-SPI, SP-I2C and HM-Link are for enabling interactive applications. Multi-RC(available only on TV with Iboard sw version IC4XA1_1.6 onwards) is a feature to program the TV and RC for a one to one matching in a multi
ページ7に含まれる内容の要旨
• No. of Channels: This sub menu allows setting the number of TV, PAY-TV, Info and Radio channels. • Channel Install: In the Channel Install sub-menu, various channel settings can be set. Please refer to the section on Channel Installation for further details. • Configuration: In the Configuration menu, various settings and features of the TV can be adjusted. Please refer to the section on Configuration for further details. In the Channel Installation sub-menu, ch
ページ8に含まれる内容の要旨
• Mute: This item enables/disables picture and sound for the particular channel. o NONE: normal picture and sound enabled o VIDEO: picture is blanked for this channel (e.g. radio channel) o AUDIO: sound is muted for this channel (e.g. information channel) • A uto Install TV: This sub menu allows the TV channels to be scanned and set auto matically. • Protection: This function is to protect a selected program for Pay TV purpose. Press the Left/Right key to toggle the protect
ページ9に含まれる内容の要旨
In this sub menu the behavior of the TV after switching on and the behavior of the On Screen Display can be selected. • Welcome Message: Press Cursor Left/Right to display Welcome message entry menu: o Welcome Message o Display Yes/No o Line 1 o Line 2 o Clear With the Up/Down key you can set the message characters. • Switch On Channel: This item sets the television’s channel at switch on. • Switch On Volume: This item sets the television’s volume at switch on. Use
ページ10に含まれる内容の要旨
In this sub menu, the Picture and Sound settings of the TV can be selected. • Brightness: This changes picture brilliance. • Colour: This changes the intensity of the colour. • Contrast: This changes the difference between the light and dark tones. • Sharpness: This changes the picture definition. • Tint: This allows adjustment of colour hue to obtain natural skin tones. • Active Control (* menu option only available in certain models): Active Control function optimises the
ページ11に含まれる内容の要旨
In this sub menu, the Security settings of the TV can be configured. • Security Level: The “SECURITY” function allows the user to select one of two states - “HIGH” or “STANDARD”. The default is “STANDARD”. o When the set is in the Security High Mode the setup menu can only be accessed by a Institutional Set-up Remote Control. o When the set is in the Security Standard Mode, the Set-up Menu can be accessed with a guest remote control by a sequence of commands (3 1 9 7 5 3
ページ12に含まれる内容の要旨
In this sub menu, the Control settings of the TV can be configured. • ESP: Energy Saving Programmability Mode (ESP) function controls the maximum continuous viewing time allowed and its valid values are 00 - 99 (in hours). 00 value means that the ESP function is OFF. Note that if the TV is switched off, the ESP timer countdown will be reset. • Audio/Video Mute: The Audio/Video Mute menu function determines whether the video should be blanked and the audio should be
ページ13に含まれる内容の要旨
• Brightness/Colour/Contrast/Sharpness: Use the remote control Right/Left key to change the picture setting. • Sleeptimer: This item is to select an automatic period for the TV to switch to Standby when the TV does not receive any commands from the user. This is a useful feature for energy saving if hotel guests have left the room with the TV still in the On mode. Available periods are 15 mins, 30 mins, 45 mins, 60 mins, 90 mins, 120 mins, 180 mins, 240 mins and OFF. Use the remote c
ページ14に含まれる内容の要旨
Alarm On (for sets with Clock display) Activates the wake-up alarm. After a valid time (0:00 to 23:59) i s entered, the “Wake up Alarm” Standby icon on the clock display will be visible. Press to switch the TV to standby mode. + Info - + Pay TV - To move up or down To move up or down a an Info channel. Pay TV channel. + Radio - To move up or down a Radio channel. Alarm Off (for sets with Smart Keys Clock display) To select predefined Deactivates the wake-up alarm. p
ページ15に含まれる内容の要旨
Teletext is an information system broadcast available in certain channels. In some countries, it also offers access to subtitles for viewers with hearing problems or who are not familiar with the transmission language (cable networks, satellite channels, etc.). Press: To switch Teletext On/Off In Teletext mode, press: To enter a (3-digit) page number For previous / next page For previous / next page Direct access to coloured page numbers as
ページ16に含まれる内容の要旨
The pictures you receive may be transmitted in 16:9 format (wide screen) or 4:3 format (conventional screen). 16:9 pictures sometimes have a black band at the top and bottom of the screen (letterbox format). This function allows you to optimize the picture display on screen. Using the different formats The Picture Format can be set via the Guest Menu or Set-Up Menu. 4:3 The picture is reproduced in 4:3 format and a black band is displayed on either side of the picture. Zoom
ページ17に含まれる内容の要旨
Fullscreen This mode displays images in full screen. The Philips Wireless Smart-Loader 22AV1120/00 is an installation tool especially designed for easy and fast installation of Philips Institutional TV’s. Preparation Make sure that the 3 R6/AA sized batteries are placed correctly in the battery compartment of the Wireless Smart-Loader. Turn the power switch on at the left side of the product. A green LED at the top casing should light up when pressing any button indicating opera
ページ18に含まれる内容の要旨
> A number display shows from 1~100 the percentage of memory storage progress from the TV to the Wireless Smart-Loader (100 = fully loaded). TV TO SMARTLOADER |||-------- ## > When the data transfer is completed, ## is “100”, the following menu appears for 3 seconds: SMARTLOADER READY > > Now the Wireless Smart-Loader is programmed and can be used to install other TV sets. 3. Installing a TV with the Wireless Smart-Loader Use a Wireless Smart-Loader programmed with the setti
ページ19に含まれる内容の要旨
Problems and Solutions: The message “WRONG VERSION” is displayed on the screen. => The program stored into the Wireless Smart-Loader has a software code incompatible with the actual TV. Reprogram the Wireless Smart-Loader from a master TV whose software code is compatible with the actual TV. 1. The message “I2C ERROR” is displayed on the screen. => Bad connection of RJ11 wire or wrong data transmission occurred. Please check the RJ11 connection and try again. 2. TV doesn’t respond
ページ20に含まれる内容の要旨
Should your remote be lost or broken you can still change some of the basic settings with the keys on top/side of your TV. Keys on top of TV Keys on side of TV Press: • The – Volume + key to adjust the volume; • The – Program+ key to select the TV channels or source Press the MENU key to summon the main menu (not available on all TVs). Use: • The – Program+ key to scroll up and down the menu to select item; • The – Volume + key to change the value of the sel
