ページ1に含まれる内容の要旨
Philips Professional
&
Business Solutions
EN User Manual
TYPE NR. BDL4631V
ページ2に含まれる内容の要旨
TABLE OF CONTENTS SAFETY INSTRUCTIONS ...................................................................................................................................................................... 1 Contents ..................................................................................................................................................................................................... 7 Elements Name and Functions .................................................
ページ3に含まれる内容の要旨
ページ4に含まれる内容の要旨
User Manual BDL4631V/00 SAFETY INSTRUCTIONS WARNINGS AND PRECAUTIONS KNOW THESE SAFETY SYMBOLS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product. This symbol alerts you that important literature concer
ページ5に含まれる内容の要旨
User Manual BDL4631V/00 REGULATORY INFORMATION CE DECLARATION OF CONFORMITY Philips Consumer Electronics declare under our responsibility that the product is in conformity with the following standards • EN60950-1:2001 (Safety requirement of Information Technology Equipment) • EN55022:2006 (Radio Disturbance requirement of Information Technology Equipment) • EN55024:1998+A1:2001+A2:2003 (Immunity requirement of Information Technology Equipment) • EN6100-3-2:2000+A2:2005 (Limits for H
ページ6に含まれる内容の要旨
User Manual BDL4631V/00 POLISH CENTER FOR TESTING AND CERTIFICATION NOTICE The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, monitor, printer, and so on) should have the same power supply source. The phasing conductor of the room’s electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 1
ページ7に含まれる内容の要旨
User Manual BDL4631V/00 INFORMATION FOR UK ONLY WARNING - THIS APPLIANCE MUST BE EARTHED. Important: This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows: 1. Remove fuse cover and fuse. 2. Fit new fuse which should be a BS 1362 5A,A.S.T.A. or BSI approved type. 3. Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate 3-pin plug fitted in its
ページ8に含まれる内容の要旨
User Manual BDL4631V/00 中国电子 信息 产 品污染 控制标识 要求 ( 中 国RoHS 法 规标 示要求) 产品中有 毒有害 物 质或 元素的 名称及含 量 ○：表示该 有毒有害物 质在该部件所有均 质材料中的含量均在SJ/T11363-2006 标准规 定的限量要求以下 ◦ ×：表示该 有毒有害物 质至少在该 部件的某一均 质材料中的含量超出 SJ/T11363-2006 标 准规定的限量要求 ◦ 环 保使用 期限 此标识指期限(十年)， 电子信息产 品中含有的有毒有害物 质或元素在正常使用的 条件下不 会发生外 泄或突变， 电 子信息产 品用户使用 该电子信息 产品不会对环 境造成 严重污染或 对其人身、 财产造 成严重损害 的期限。 5
ページ9に含まれる内容の要旨
User Manual BDL4631V/00 NORTH EUROPE (NORDIC COUNTRIES) INFORMATION Placering/Ventilation VARNING: FÖRSÄ KRA DIG OM ATT HUVUDBRYTARE OCH UTTAG Ä R LÄ TÅ TKOMLIGA, NÄ R DU STÄ LLER DIN UTRUSTNING PÅ PLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA. Plassering/Ventilasjon ADVARSEL
ページ10に含まれる内容の要旨
User Manual BDL4631V/00 Contents The BDL4631V monitor pack* should include: • LCD monitor • Screw for Clamper (To prevent from falling) x 2 • Power cord (1.8 m) • Main switch cover • VGA Signal Cable (1.8 m) • Screw for Main Switch cover x 2 • DVI-HDMI Cable (1.8 m) • Cable Holder x 2 • User Manual • BNC TO RCA adapter x 5 • Remote Control and AAA Batteries • Clamper x 2 (To prevent from falling) • Cable belt x 3 (For tightening
ページ11に含まれる内容の要旨
User Manual BDL4631V/00 Elements Name and Functions Control Panel Buttons POWER button ( ) : To switch the power on/off. MUTE button : To switch the audio mute ON/OFF. INPUT button : To set the function while OSD menu is on or to toggle switch between [HDMI1], [HDMI2], [PC-A], [CVI], [VIDEO] and [VIDEO] while OSD menu is off. PLUS (+) button : To increase the adjustment while OSD menu is on, or to increase the audio output level while the OSD menu is off. MINUS (-) b
ページ12に含まれる内容の要旨
User Manual BDL4631V/00 Terminal Panel AUDIO IN 1, 2, 3 To input audio signal from external equipment such as a computer, VCR or DVD player. AUDIO OUT To output the audio signal from the AUDIO IN 1,2 and 3 jack. EXTERNAL CONTROL (mini D-Sub 9 pin) This is for serial connection when multiple BDL4631V monitors are connected. To achieve the remote control through RS232 command (refer to the RS232 remo
ページ13に含まれる内容の要旨
User Manual BDL4631V/00 Remote Control SET button To activate the setting with OSD menu. AUTO ADJUST button To execute the AUTO ADJUST function. MUTE button To turn the mute function on/off. VIDEO SOURCE button To set the video source by toggle selection from [HDMI1], [HDMI2], [PC-A], [CVI], [VIDEO] and [VIDEO]. AUDIO SOURCE button To set the audio source by toggle selection from [AUDIO1] to [AUDIO2], [AUDIO3] and [HDMI]. N
ページ14に含まれる内容の要旨
User Manual BDL4631V/00 Operating Range for the Remote Handling the remote control Control * Do not subject to strong shock. * Do not allow water or other liquid to splash the remote control. Point the top of the remote control toward the LCD monitor's remote If the remote control gets wet, wipe it dry immediately. sensor during button operation. * Avoid exposure to heat and steam. Use the remote control within a distance of about 7 m/23 ft from the * Other than to
ページ15に含まれる内容の要旨
User Manual BDL4631V/00 How to Mount or Attach Feet to the LCD Monitor You can install the LCD monitor in one of the following two ways: Way 1: Attach and remove the optional feet How to install feet 1. Please turn the monitor off. 2. After inserting feet in guide block, fasten the thumbscrews on both sides of the monitor. NOTE: Install the feet with their longer portions directing to the front. Screws
ページ16に含まれる内容の要旨
User Manual BDL4631V/00 To avoid monitor from falling Take measures to prevent the monitor from falling over in case of an earthquake or other disaster might occur to lessen the probability of injury and damage. As shown in the figure below, secure the monitor to a solid wall or pillar using rope (commercially available) strong enough to bear the weight of the monitor(BDL4631V: approx. 34.6 kg). Screw hooks (commercially available), of ring type rather than C-shaped s
ページ17に含まれる内容の要旨
User Manual BDL4631V/00 Ventilation Requirements for enclosure locating To allow heat to disperse, leave space between surrounding objects as shown in the diagram below. 14
ページ18に含まれる内容の要旨
User Manual BDL4631V/00 Setup Procedure 3. Connect to external equipment 1. Install the system on the right location • To protect the connected equipment, turn off the main power CAUTION: before making connections. THE LCD MONITOR MUST BE MOVED OR INSTALLED BY • Please refer to section “Connectivity” P.18~P.22 for operations.. TWO OR MORE PERSONS. Failure to follow this caution may result in injury if the LCD 4. Connect power cord monitor falls. •
ページ19に含まれる内容の要旨
User Manual BDL4631V/00 9. Adjust the image Make adjustments to brightness or contrast if required. 10. Recommended Adjustment To reduce the risk of “image persistence”, please adjust the following items based on the application being used. “POWER SAVE”, “PANEL SAVING”, “SIDE BORDER COLOR”, “DATE AND TIME”, “SCHEDULE”. 11. To prevent the main power switch from being changed To prevent the possibility of main power switch being carelessly pushed, please attach the main switch c
ページ20に含まれる内容の要旨
User Manual BDL4631V/00 Install the LCD Monitor in Portrait Mode BDL4631V can be installed in portrait position, under the following conditions: Caution: Portrait mode is effective only when wall-mounted or ceiling-mounted. The feet can not be used for the monitor in portrait position. Placing the monitor in portrait position, will shorten the average life of the LCD backlight. Operational Environment (Temperature) shall be limited, as shown below: Operational
