ページ1に含まれる内容の要旨
AA68-01689A-cover 4/12/05 10:45 AM Page 3
Owner’s Instructions
SPK4215M
ページ2に含まれる内容の要旨
AA68-01689A-1 4/12/05 10:46 AM Page 2 Warning! Important Safety Instructions CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product. This symbol alerts you that important literature concerning operation and maintenance has been included with this product.
ページ3に含まれる内容の要旨
AA68-01689A-1 4/12/05 10:46 AM Page 3 Thank You for Choosing Samsung Thank you for choosing Samsung! Your new Samsung product represents the latest in television technol- ogy. We designed it with easy-to-use on-screen menus and closed captioning capabilities, making it one of the best products in its class. We are proud to offer you a product that will provide convenient, dependable service and enjoyment for years to come. Important Safety Information Always be careful when using your Monito
ページ4に含まれる内容の要旨
AA68-01689A-1 4/12/05 10:46 AM Page 4 •Protect the power cord. Power supply cords should be routed so that they won’t be walked on or pinched by objects placed on or against them. Pay particular attention to cords at plugs, convenience recepta- cles, and the point where they exit from the unit. • Unplug the Monitor from the wall outlet and disconnect the antenna or cable system during a lightning storm or when left unattended and unused for long periods of time. This will prevent damage to th
ページ5に含まれる内容の要旨
AA68-01689A-1 4/12/05 10:46 AM Page 5 FCC Information User Instructions The party responsible for product compliance: SAMSUNG ELECTRONICS CO., LTD The Federal Communications Commission Radio America QA Lab of Samsung Frequency Interference Statement includes the fol- 85 West Tasman Drive lowing warning: San Jose, CA 95134 USA NOTE: This equipment has been tested and found Tel) 408-544-5124 to comply with the limits for a Class A digital Fax) 408-544-5191 device, pursuant to part 15 of the FCC
ページ6に含まれる内容の要旨
AA68-01689A-1 4/12/05 10:46 AM Page 6 User Instructions Screen Image retention Do not display a still image (such as on a video game or when hooking up a PC to this Monitor) on the plasma monitor panel for more than 2 hours as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, refer to page 26 and 42 of this manual to reduce the degree of brightness and contrast of this screen when displaying a still image. Warranty Warra
ページ7に含まれる内容の要旨
AA68-01689A-1 4/12/05 10:46 AM Page 7 Table of Contents Setup Your New Plasma Display Panel ................................................................................................................10 Remote Control Buttons ............................................................................................................................12 Wall Installation Instructions .............................................................................................................
ページ8に含まれる内容の要旨
AA68-01689A-1 4/12/05 10:46 AM Page 8
ページ9に含まれる内容の要旨
AA68-01689A-1 4/12/05 10:46 AM Page 9 PLASMA DISPLA Y P ANEL Setup Your New Plasma Display Panel ....................................................10 Remote Control Buttons ................................................................12 Wall Installation Instructions ..........................................................14 Turning the PDP On and Off ..........................................................18
ページ10に含まれる内容の要旨
AA68-01689A-1 4/12/05 10:46 AM Page 10 Your New Plasma Display Panel Front Panel Remote Control Signal Receiver Power Button Aim the remote control towards Press to turn the PDP on this spot on the Monitor. and off. Checking Parts Video Cable Power Cord Remote Control/ Video Cable AAA Batteries (15Pin) S-VHS Cable Diskette Owner’s (Plug & Play RS-232C) Instruction 10
ページ11に含まれる内容の要旨
AA68-01689A-1 4/12/05 10:46 AM Page 11 Rear Panel Component Input (Y, Pb, Pr) jacks Connect a video signal from a DVD player or DTV receiver. Composite Input jack Connect a video signal from external sources like VCRs or DVD players. Power Input jack RS-232C S-video Input jack Connect a S-Video signal from an S-VHS VCRs Input jack or DVD players. RGB Input jack (15pin) Connect to the video output jack on your PC. 11
ページ12に含まれる内容の要旨
AA68-01689A-1 4/12/05 10:46 AM Page 12 Remote Control Buttons Flip the cover open in the arrow direction. Remote Control ŒPower button Turns the PDP on and off. ´Number buttons ˇDisplay button Press to display information on the PDP screen. ¨Menu button Displays the main on-screen menu. ˆCH (Channel) and VOL (Volume) buttons Not available for this Monitor. ØMute button Not available for this Monitor. ∏P.Mode button Adjust the PDP picture by selecting on of the preset factory settings (or sele
ページ13に含まれる内容の要旨
AA68-01689A-1 4/12/05 10:46 AM Page 13 ıVCR control buttons Controls VCR tape functions: Stop, Rewind, Play/Pause, Fast Forward. ˜Set button Use during set up of this remote control, so that it will work compatibly with other devices (VCR, cable box, DVD, etc.) ¯Clock set button Press to clock setting. ˘PIP control buttons Source : Press to select one of the available signal sources for the PIP window. Swap : Exchanges the video signal that is currently displayed on the main screen with the s
ページ14に含まれる内容の要旨
AA68-01689A-1 4/12/05 10:46 AM Page 14 Wall Installation Instructions Installation Notes Do not install the PDP on any place other than vertical walls. 1 To protect the performance of the PDP and prevent troubles, avoid the following places: 2 • Next to spring cooler detectors. • Places subject to vibration or shock. • Near high voltage cables. • Around heating apparatus Install the PDP considering the materials of the place where the PDP is located. 3 Use only recommended parts and c
ページ15に含まれる内容の要旨
AA68-01689A-1 4/12/05 10:46 AM Page 15 Installing the Display on the Wall Attachment Panel: See the drawing of the wall attachment panel shown in page 14 to check for the stability of the wall where the PDP is to be installed. If the wall is not 1 enough strong to support the PDP, strengthen the wall before installation. Fix the wall attachment panel on the wall using bolts as shown in the following figure: Fixing bolts must protrude from the wall appox. 0.6 inches. 2 Using the wall att
ページ16に含まれる内容の要旨
AA68-01689A-1 4/12/05 10:46 AM Page 16 Remove four large screws from the rear side of the display. 4 Insert the hexagonal bolts, dish-type washers, and insulation rubber into the four screwholes as shown in the following figure: 5 Œ Hexagonal bolt ´ Dish-type washer ˇ Insulation rubber Put the insulation rubber point protruding from the rear top of the display in the groove on the top of the wall attachment panel. Lift up the display a little 6 bit so that the insulation rubber point
ページ17に含まれる内容の要旨
AA68-01689A-1 4/12/05 10:46 AM Page 17 Insert the fixing bolts into the boltholes on both sides (left and right) of the wall fixing panel. Keep the fixing bolts tight to prevent the display from separating 7 from the panel, and falling to the floor. Separating the Display from the Wall Attachment Panel: Remove the fixing bolts from both sides (left and right) of the wall attachment panel. Lift and pull the bottom of the display a small amount, to separate the insulation rubber point from
ページ18に含まれる内容の要旨
AA68-01689A-1 4/12/05 10:46 AM Page 18 Turning the Monitor(PDP) On and Off Turning the Monitor(PDP) On and Off Press the Power button on the remote control. The PDP will turn on and you will be ready to use it’s features. You can also use the Power button on the front of the PDP. Notes: • If your Monitor isn’t turned on when the power button is pressed: Press the MODE button to check if the Monitor mode has been chosen ( ). Viewing the Menus and Displays Your PDP has a simple, easy-to-use
ページ19に含まれる内容の要旨
AA68-01689A-1 4/12/05 10:46 AM Page 19 Displaying Status Information Press the Display button on the remote control. The PDP will VIDEO display the Screen size, Resolution, Current time, and screen mode. Video : Movie Aspect : Wide 10 : 30 Am (VIDEO, S-VIDEO or DVD mode) PC Aspect : Fill All Resolution : 800 x 600 60Hz 10 : 30 Am (PC mode) Displaying Clock Press the Clock Display button on the remote control. The Current time will display on the screen. 1
ページ20に含まれる内容の要旨
AA68-01689A-2 4/12/05 10:49 AM Page 20
