ページ1に含まれる内容の要旨
OWNER’S MANUAL
GUIDE D’UTILISATION
40” CLASS WIDE LCD TV
TÉLÉVISEUR ACL GRAND ÉCRAN CATÉGORIE 40 PO
HDLCD4050
ATTENTION
ATTENTION
If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the
required programming code.
Si vous utilisez avec cet appareil une télécommande universelle (autre que celle vendue avec ce téléviseur),
consultez la documentation accompagnant la télécommande universelle afin de connaître le code numérique cor-
respond
ページ2に含まれる内容の要旨
ENGLISH The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. CAUTION: TO REDUCE THE RISK OF ELECTRIC The exclamation point within an equilateral triangle is intended to SHOCK, DO NOT REMOVE COVER alert the user to the presence of (OR BACK). NO USER-SERVICEABLE important operating
ページ3に含まれる内容の要旨
15) Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as vases, should not be placed on the apparatus. 16) An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fa
ページ4に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS 20) When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 21) Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition. 22) When you connect th
ページ5に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS CONDENSATION Moisture will form in the operating section of the unit if the unit is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, unit's performance will be impaired. To prevent this, let the unit stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually. Condensation may also form during the summer if the unit is exposed to
ページ6に含まれる内容の要旨
How to attach the stand NOTE: • Unplug the AC cord from the AC INPUT terminal. • Before beginning this process, assure that the TV is laid on a clean, safe, and cushioned surface to avoid any damage to the unit. • Do not touch or press the TV-screen, glass might break under pressure. Place the TV on its front onto a table. Align the stand’s bottom-plate (supplied) as seen here. It will fi t in only one direction. Hold the unit and attach the stand frame (a) slowly and secure the stand frame (a)
ページ7に含まれる内容の要旨
Features • Integrated Digital Tuner - You can view digital broadcasts without using a Digital TV Set-Top Box. • Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for hearing impaired viewers. • Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote control adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS. • Programmable TV Sleep Timer - Operable from the remote control, the LCD TV can be progra
ページ8に含まれる内容の要旨
Contents Before using your unit IMPORTANT SAFETY INSTRUCTIONS ...........3 SAFETY PRECAUTIONS .................................5 How to attach the stand ....................................6 How to remove the stand ..................................6 F eatures ............................................................ 7 Power source ....................................................7 Contents ...........................................................8 Parts and functions ..................
ページ9に含まれる内容の要旨
Parts and functions Front Left side POWER button CH (CHANNEL) / buttons VOL (VOLUME) +/– buttons MENU button INPUT/ENTER button Indicator Red : Standby To display the menu screen. Green : On Touch MENU button to display the menu screen. CH (CHANNEL) / buttons, VOL (VOLUME) Remote sensor +/– buttons and INPUT/ENTER button can be used to select the desired setting during the menu screen operations. DIGITAL AUDIO COAXIAL OUT jack PC/DVI AUDIO IN jack HDMI3 IN jack FOR SERVICE PERSONNEL USE ON
ページ10に含まれる内容の要旨
Remote control 6.CURSOR ▲/ ▼/ ◀/ ▶ Buttons - Used to operate the 12 menu functions of the LCD TV. 1 13 7.ENTER Button - Use to enter or select 2 information for On-Screen operations. 8.MUTE Button - To turn off the sound, press this 3 button once. The LCD TV will be silenced and the symbol “Mute” will appear on the screen. The 4 14 muting feature can be released by pressing the MUTE button again or one of the VOL (VOLUME) 15 5 + or – buttons. 9.VOL (VOLUME) + / – Buttons - Press the + 6
ページ11に含まれる内容の要旨
Antenna connections If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a Cable TV service, see “Cable TV connections”. Combination VHF/UHF Antenna (Single 75 ohm cable) Connect the 75 ohm cable from the combination Antenna Jack VHF/UHF antenna to the Antenna Jack. 75 ohm Coaxial Cable Cable TV connections This TV has an extended tuning range and can tune most cable channels without using a Cable TV Converter
ページ12に含まれる内容の要旨
Connections to other equipment The exact arrangement you use to interconnect various video and audio components to this unit is dependent on the model and features of each component. Check the Owner’s Manual provided with each component for the location of video and audio inputs and outputs. To connect the LCD TV to a VCR Left of the unit VCR To VIDEO/AUDIO IN To Video/Audio OUT Video/Audio cord (not supplied) To connect the LCD TV to a DVD player with Component Video Input You can enjoy a hig
ページ13に含まれる内容の要旨
Connections to other equipment (continued) To connect an audio system This connection allows you to use an audio amplifier and external speakers, and adjust the audio level using the TV’s remote control. To control the audio, turn on the TV and the stereo amplifier, and turn off the TV’s built-in speakers (see page 17). Rear of the unit Amplifier To VAR. AUDIO OUT To Audio (L) Input To Audio (R) Input Audio cord (not supplied) NOTE: • To hear sound when using an external audio amplifier, the vo
ページ14に含まれる内容の要旨
Connections to other equipment (continued) To connect a HDMI or a DVI device to the unit The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device. When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate analog audio cords required. To DVI output To PC/DVI AUDIO IN Audio cord (not supplied) HDMI - to - DVI adapter cable DVI device Rear and Left of the unit (HDMI type A con
ページ15に含まれる内容の要旨
TO SELECT ANALOG CHANNELS Starting setup 1-9: Press 1-9 as needed. Example, to select channel 2, press 2, then press The Auto Setup menu appears the first time you ENTER. turn on the TV, and assists you to specify the 10-99: Press the 2 digits in order. Example, Air/Cable setting, and program your channels to select channel 12, press 1, 2, then automatically. press ENTER. 100-135: Press the 3 digits in order. Example, to IMPORTANT: Make sure that the antenna or cable select channel 120,
ページ16に含まれる内容の要旨
DISPLAY Quick guide for menu Press DISPLAY to display the current information on the screen. operation When the TV receives a digital signal, the digital information will appear. Call menu and for example: Select Language. Sleep Timer 62-1 HDTV Moving Picture1 Off CH-1 TV-MA Digital Air English Press INPUT SELECT to select TV mode. 1 No Program Information is available 2 Press MENU. The TV menu screen will appear. Main Menu Full 1080i Picture >> Audio CH Channel Lock • Channel number • S
ページ17に含まれる内容の要旨
Convenience functions You can change the default settings by pressing the MENU button on your remote, then select the one of the icons at the left of the menu - follow the On-Screen prompts to set your preferences. Icon Selected Items Setup hint Picture Picture Sports Bright and dynamic picture (factory-set) Preference Standard Standard picture quality (factory-set) Movie Movie-like picture setting (factory-set) Memory Your personal preferences (set by you; see “Picture Setting”) Picture Settin
ページ18に含まれる内容の要旨
The TV will begin memorizing all the channels Memorizing channels 4 available in your area. • It may take from 15 minutes to 30 minutes to This TV is equipped with a channel memory complete memorizing digital cable channels. feature which allows channels to skip up or down Depending on the reception condition, a bar to the next channel set into memory, skipping display may not advance for several minutes, over unwanted channels. Before selecting please be patient. channels, they must be
ページ19に含まれる内容の要旨
CH Ch Label Clear All Channel Number 15-1 All channels are deleted from the channel memory. Ch Label CH-1 Label Clear >> Select “Channel”, then press ▶ or ENTER. 1 2 Press ▲ or ▼ to select “Add/Delete”, then press ▶ :Adjust :Select or ENTER. Press ◀ or ▶ repeatedly until the character you 4 3 Press ▲ or ▼ to select “Clear All”, then press ▶ or want appears in the first space. ENTER. CH Ch Label CH Add/Delete Channel Number 15-1 Adding Channel >> Ch Label CH-1 Add/Delete >> Label Clear >> Clea
ページ20に含まれる内容の要旨
Genre: Setting the V-Chip D : Dialogue L : Language An age limitation can be set to restrict children from S : Sex viewing or hearing violent scenes or pictures that you V : Violence FV : Fantasy Violence may choose to exclude. The restriction applies to “TV Rating” and “Movie Rating” if this data is transmitted. Movie Rating You may set this restriction separately. To use the Movie Rating V-Chip function, you must register a password. G PG PG-13 To register a password R NC-17 X Select
