ページ1に含まれる内容の要旨
Owner’s Manual
4
For assistance:
Table of Contents
Manual del usuario
26
Tabla de contenido
www.sanyoctv.com
Manuel d’instructions
44
Table des matières
1-800-877-5032
We’ll be glad to Help
Plasma HDTV
TV HD de Plasma
50”
TV HD Plasma
DP50710
Model No. / No. de Modelo / Nº de modèle
Part No. / No. de parte / Nº de piece: 1JC6P1P0378- - 1JC6P1P0378- -
© 2010 Sanyo Manufacturing Corporation
ページ2に含まれる内容の要旨
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A CAUTION RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. RISK OF ELECTRIC SHOCK DO NOT OPEN! THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THIS (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. UNIT. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK
ページ3に含まれる内容の要旨
FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee t
ページ4に含まれる内容の要旨
CHANNEL LOOP CONTENTS Please read before IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . 2 operating your HDTV! FCC INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 TRADEMARKS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 PC RESOLUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 PROTECTING THE SCREEN CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 CAUTION: The scre
ページ5に含まれる内容の要旨
STAND REMOVAL ____________ GETTING STARTED Place HDTV face down on a padded or BATTERY INSTALLATION 1 cushioned flat surface to protect the screen and finish Install two (2) “AAA” batteries in the remote control. (Not included) Remove the four (4) screws securing the foot 2 stand. CAUTION: Hold the stand firmly as you To ensure safe operation, please observe the remove the last screw. following precautions: • Replace both batteries at the same time. Do not use a new battery with a used battery.
ページ6に含まれる内容の要旨
GETTING STARTED HDTV INPUT/OUTPUT REFERENCE 2 8 9 3 4 5 6 7 1 5 Stereo Audio Out (L/R) Jacks 1 HDMI (INPUT1, 2 & 3) An all digital AV interface that can accept 6 Composite Video Input (VIDEO1) uncompressed video signals for the very best Yellow (Video), plus white and red (Audio) inputs. picture possible. S-Video Input (VIDEO1) 7 NOTE: A DVI connection is possible via the HDMI (DVI) NOTE: An S-Video connection will replace and override INPUT1 jack using an appropriate DVI to HDMI a connection to
ページ7に含まれる内容の要旨
GETTING STARTED AUDIO / VIDEO CONNECTIONS HDMI (DVI) INPUT1 can be used to hookup Digital Audio Output is used to hookup a a DVI device with the use of an appropriate multichannel receiver with the use of a phono- DVI to HDMI cable or adapter. (VIDEO3 type digital audio cable. Audio in L/R jacks need to be hooked up to Component connections will accept SDTV, the DVI device as well.) EDTV and HDTV video signals. Use them for NOTE: HDMI (DVI) INPUT1 can be used for any great image quality from d
ページ8に含まれる内容の要旨
GETTING STARTED INITIAL CHANNEL SEARCH Before proceeding, please make sure to hook up your antenna or cable connection and all AV equipment correctly to your HDTV. HOOK UP AC POWER CORD (120V AC, 60Hz) to the HDTV and plug in to AC outlet. INITIAL ENERGY SAVING MODE SCREEN TURN ON TV (PRESS POWER BUTTON) Wait for on-screen instructions to set an Initial Energy Saving Mode, and perform an Initial Channel/Signal Search. TV SET LOCATION SELECTION: Select “Home Mode” by pressing the CH key to set t
ページ9に含まれる内容の要旨
REMOTE CONTROL OPERATION • POWER Key—Turns your HDTV On or Off. • PIX SHAPE Key—Cycles through the available aspect ratios. The different settings either • INPUT Key—Selects the video source to view. stretch, zoom, or fill the image on your screen. Holding down the key displays the Input List. Bars may appear on top and bottom of your screen (or on left and right sides) depending on • ECO Key—Modifies the Energy Saver level (see the broadcasted signal or program. (See page page 11.) 15) • AUDIO
ページ10に含まれる内容の要旨
ON-SCREEN MENU OPERATION CHANNEL SETTING ___________ Display the On Screen menu and use the CURSOR keys to select Channel Setting. Press ENTER. Channel Search Auto – Searches the detected mode, Cable or Air. Cable – Searches for analog and unscrambled (ClearQAM) digital cable channels. Air (Antenna) – Searches for analog and digital off-air MAIN MENU SCREEN channels. Digital Add-On – Searches digital off-air channels adding newly found digital channels to the channel map database. NOTE: Digit
ページ11に含まれる内容の要旨
ON-SCREEN MENU OPERATION Video2 Setting Use this feature to establish either a Component or Composite connection to the VIDEO INPUT 2 jacks on your HDTV. Use the CURSOR keys to select the type of connec- tion you’ll use in VIDEO INPUT 2. Press ENTER, a blue mark will appear next to the selected option. VIDEO2 SETTING SCREEN SETUP ________________________ Display the On Screen menu and use the CURSOR keys to select Setup. Press ENTER. Menu Language Choose between English, Spanish and Fren
ページ12に含まれる内容の要旨
ON-SCREEN MENU OPERATION SETUP ______________________ Clock Timer This feature allows you to set a Current Time for your HDTV and enable a Switch On Time for the HDTV to turn on at a specific time of day. When On Timer Function is set to ON, the TV will automatically turn on at the previously set Switch on Time. CLOCK TIMER SCREEN Light Sensor This feature detects ambient room light brightness and uses that reading to control the panel brightness level and picture parameters to reduce the HDTV’
ページ13に含まれる内容の要旨
ON-SCREEN MENU OPERATION SETUP _____________________ V – Chip (Parental Control) Use this feature to automatically block programs with content you deem as inappropriate for viewing by your children. NOTE: This feature is designed to comply with the United States of America’s FCC V-Chip regulations. Therefore, it may not function with broadcasts that originate in other countries. SETUP V-CHIP SCREEN ADJUSTING THE V-CHIP RATINGS Select ON and press ENTER. Select Adjust (Standard) and press ENTER.
ページ14に含まれる内容の要旨
ON-SCREEN MENU OPERATION PICTURE ____________________ Display the On Screen menu and use the CURSOR keys to select Picture. Press ENTER. You may choose between Vivid, Mild, , and Standard, which have predetermined fixed picture parameter values, or choose the Manual option for customized personal settings. NOTE: Each AV input can have its own picture mode (pre- MAIN MENU SCREEN determined or manual.) Current input’s selected option is indicated by a blue marker. MANUAL PICTURE SETTINGS Manual
ページ15に含まれる内容の要旨
PIX SHAPE 4:3 TRANSMISSION 16:9 TRANSMISSION Pix1 0 Shows a standard definition 4:3 image -1 in its original format, a 16:9 wide image is slightly compressed horizontally. 0 0 NOTE: Vertical bars are “attached” to the sides of the screen. Pix2 0 1 Fills the entire image on the screen. NOTE: A standard definition 4:3 image is 0 0 stretched horizontally. Pix3 0 1 Image is stretched vertically in compar- isson with Pix2. 1 1 NOTE: Shows a proportional Zoom for a 4:3 image. Pix4 1 2 Image is stretc
ページ16に含まれる内容の要旨
ON-SCREEN MENU OPERATION SOUND _____________________ Display the On Screen menu and use the CURSOR keys to select Sound. Press ENTER. Choose an option for your sound settings: Auto – Sound settings are linked to the current Picture option and parameters are adjusted accordingly. Dynamic, Mild, Standard – 3 different predetermined sound parameters not linked with any Picture option. MAIN MENU SCREEN MANUAL SOUND SETTINGS The Manual option provides different parameters that can be personally ad
ページ17に含まれる内容の要旨
PC INPUT PC Setting Use your HDTV as a computer monitor by hooking up your PC or Laptop to the TV with the use of an Auto Adjustment – Automatically adjusts display appropriate monitor cable (not included.) position, dot clock and phase. Before connecting any cables, disconnect the Dot Clock – Adjust the Dot frequency to match AC power cords of both the HDTV and PC from your computer’s Dot frequency. the AC outlets. Phase – Adjust this parameter when the picture Power on the HDTV and any other p
ページ18に含まれる内容の要旨
USB INPUT PHOTO VIEWER _____________ View pictures on your HDTV with the use of a USB mass storage device (not included.) NOTE:The HDTV switches to USB Input when a USB flash drive is detected. THUMBNAIL VIEW SCREEN NOTE:A thumbnail hide icon will appear if a picture cannot be decoded or if no USB FLASH thumbnail data is available. DRIVE USING THE PHOTO VIEWER Press ENTER on a thumbnail photo to enable the Rotate, Full View and Start Slideshow functions. Once in Full View mode: Use the CURSOR
ページ19に含まれる内容の要旨
ONE-YEAR LIMITED PARTS AND LABOR WARRANTY THIS LIMITED PARTS AND LABOR WARRANTY IS VALID ONLY ON SANYO TELEVISIONS PURCHASED AND USED IN THE UNITED STATES OF AMERICA, CANADA, AND PUERTO RICO, EXCLUDING ALL OTHER U.S. TERRITORIES AND PROTECTORATES. THIS LIMITED WARRANTY APPLIES ONLY TO THE ORIGINAL RETAIL PURCHASER, AND DOES NOT APPLY TO PRODUCTS USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES. WARRANTY APPLICATION FOR ONE YEAR from the date of original retail purchase Sanyo Manufacturing Corporation
ページ20に含まれる内容の要旨
This product incorporates the following software: Software 1. the software developed independently by or for Foundation's software and to any other program whose Sanyo Electric Co.,Ltd., authors commit to using it. (Some other Free Software 2. the software owned by third party and licensed to Foundation software is covered by the GNU Lesser Sanyo Electric Co.,Ltd., General Public License instead.) You can apply it to your 3. the software licensed under the GNU General Public programs, too. Lic
