ページ1に含まれる内容の要旨
LC-13S2U
LC-15S2U
LC-20S2U
LIQUID CRYSTAL TELEVISION
ENGLISH
OPERATION MANUAL
IMPORTANT:
Model No.:
To aid reporting in case of loss or theft, please
record the TV’s model and serial numbers in the
space provided. The numbers are located at the
Serial No.:
rear of the TV.
U.S.A. ONLY
IMPORTANT INFORMATION
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
The lightning flash with arrow-
head symbol, within an equilat-
eral triangle, is intended
ページ2に含まれる内容の要旨
IMPORTANT INFORMATION (Continued) WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. U.S.A. ONLY CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. “Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electrical Code that provides
ページ3に含まれる内容の要旨
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Precautions carefully before using this product. IMPORTANT SAFETY PRECAUTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. Ho
ページ4に含まれる内容の要旨
IMPORTANT SAFETY PRECAUTIONS (Continued) Cleaning—Unplug the power cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink and laundry tub, swimming pool and in a wet basement. Stand—Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product
ページ5に含まれる内容の要旨
IMPORTANT SAFETY PRECAUTIONS (Continued) Outdoor Antenna Grounding – If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, l
ページ6に含まれる内容の要旨
CONTENTS Page IMPORTANT INFORMATION.......................................................................................................1, 2 DEAR SHARP CUSTOMER .............................................................................................................3 IMPORTANT SAFETY PRECAUTIONS .......................................................................................3-5 CONTENTS .................................................................................................
ページ7に含まれる内容の要旨
SUPPLIED ACCESSORIES Make sure the following accessories are provided with the product. Remote Control “AAA” size (UM/SUM-4) Dry Battery (×2) RRMCGA174WJSA Antenna Cable AC Cord QCNWG0003CEPA QACCDA023WJPA AC Adapter Operation Manual Cable Clamp (×2) UADP-0212CEZZ UBATU0026GEZZ UADP-A044WJPZ TINS-A965WJZZ LHLDWA002WJSB A • AC cord enclosed in this product is an object for 110-125V. In using it on the 125-240V AC, please consult to the following. SHARP ELECTRONICS CORPORATION 1300 Naperville Driv
ページ8に含まれる内容の要旨
PREPARATION Using the Remote Control Use the remote control by pointing it towards the remote POWER OPC HEADPHONE control sensor window on the main unit. Objects between HEADPHONE jack the remote control and sensor window may prevent proper operation. OPC indicator POWER indicator Cautions regarding use of the remote control Remote control Do not expose the remote control to shock. sensor In addition, do not expose the remote control to liquid, and OPC sensor do not place in an area with hig
ページ9に含まれる内容の要旨
PREPARATION (Continued) Removing the Terminal Cover LC-20S2U Before connecting cables and cords to the rear terminals, remove the terminal cover. Push in the tab and pull out the terminal cover carefully. To mount the cover, insert the 2 hooks on the bottom of the cover into the cabinet and press on the upper part of the terminal cover until the tab locks in place with a click. LC-13/15S2U Before connecting cables and cords to the rear terminals, remove the terminal cover. Push in the 2 ta
ページ10に含まれる内容の要旨
PREPARATION (Continued) Antenna Connection ANTENNAS • The antenna requirements for good color television reception are more important than those for black & white television reception. For this reason, a good quality outdoor antenna is strongly recommended. The following is a brief explanation of the type of connections that are provided with the various antenna systems. F-type connector 1. A 75-ohm system is generally a round cable with F-type connector that can easily be attached to a terminal
ページ11に含まれる内容の要旨
PREPARATION (Continued) Antenna Connection (Continued) CABLE TV (CATV) CONNECTION • A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75- ohm coaxial cable to the set, screw the 75-ohm cable to the ANT. terminal. • Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company. This converter/descrambler i
ページ12に含まれる内容の要旨
DISPLAY AND CONTROL OVERVIEW Controls Upper control panel VOL (–)/(+) CH ( )/( ) MENU TV/VIDEO MAIN POWER To change the vertical angle of the LCD TV set, tilt the screen up to 2.5 degrees forward or 10 degrees backward. The TV set can also be rotated 25 degrees horizontally. Adjust the angle so that the TV set can be watched most comfortably. Speaker OPC sensor HEADPHONE jack Plug the headphone mini-plug into the HEADPHONE jack located on the front of the TV set. OPC indicator (Optical Picture C
ページ13に含まれる内容の要旨
DISPLAY AND CONTROL OVERVIEW (Continued) Adjusting the screen view angle Terminals VIDEO AUDIO (L) AV-IN1 AUDIO (R) S-VIDEO ANT. (Antenna terminal) Y PB PR COMPONENT AUDIO (L) AUDIO (R) POWER INPUT (DC12V) Hold the carrying handle and tilt the screen while steadying the stand with your other hand. Carrying handle Round lock for Kensington Security Standard Slot. AUDIO (R) AV-OUT AV-IN2/OUT AUDIO (L) VIDEO S-VIDEO 13 LC-13/15/20S2U(E)-b 13 03.6.13, 2:23 PM
ページ14に含まれる内容の要旨
REMOTE CONTROL 1 POWER (p. 21) Switch the Liquid Crystal Television power on or off. 10 1 BRIGHT 2 SLEEP (p. 26) 11 Set the sleep timer. SLEEP PIC. FLIP 2 12 3 ENTER ENTER Execute a command. 3 DISPLAY MENU 13 4 4 DISPLAY AUDIO 5 MUTE CC TV/VIDEO 14 ONLY Display the channel and time information. 6 15 FLASH- 5 AUDIO ONLY (p. 29) BACK VOL CH Output audio without screen image. 7 16 6 MUTE (p. 23) 8 Mute the sound. 7 VOL (+)/(–) (p. 23) 17 Set the volume. 8 CH ( )/( ) (p. 24) 9 Select channel. 9 MTS
ページ15に含まれる内容の要旨
EZ SETUP (WITH AUTO CLOCK SETTING) EZ SETUP during the First Power On Control section of main unit When you turn on the TV for the first time, it will automatically memorize the broadcasting channels and clock. Please perform the following instructions before you press MAIN MAIN POWER POWER. (1) Insert the batteries into the remote control. (See page 8.) (2) Connect the antenna cable to the TV set. (See page 10.) (3) Connect the AC adapter to the POWER INPUT terminal of the product and plug in
ページ16に含まれる内容の要旨
EZ SETUP (WITH AUTO CLOCK SETTING) (Continued) EZ SETUP during the First Power On (Continued) 6 Press a/b to select YES, and CONNECT ANTENNA OR CABLE. press ENTER. BRIGHT START EZ SETUP? SLEEP PIC. FLIP If you want to stop the EZ SETUP YES NO process once it has started, press ENTER DISPLAY MENU c and it will be canceled. If you ENTER/ AUDIO want to SET UP again, please refer MUTE ONLY CC TV/VIDEO a/b/c/d to pages 35 and 36 on SET UP. FLASH- BACK VOL CH ENTER MENU SELECT : ENTER : EXIT: T
ページ17に含まれる内容の要旨
SETTING THE CLOCK AUTO CLOCK Setting There are two methods of setting the clock: AUTO CLOCK and MANUAL CLOCK. AUTO CLOCK uses EDS signals, which are provided by some TV stations, to automatically adjust the clock. MANUAL CLOCK set the clock manually in areas where no channel carries EDS signals. 1 Press MENU to display the MENU MENU SLEEP TIMER screen. AV ADJUST BRIGHT PRESET SLEEP PIC. FLIP CLOSED CAPTION V–CHIP BLOCK ENTER SET UP DISPLAY MENU ENTER/ AUDIO MUTE ONLY CC TV/VIDEO a/b FLASH- 2 Pre
ページ18に含まれる内容の要旨
SETTING THE CLOCK (Continued) AUTO CLOCK Setting (Continued) 5 Press a/b to move the cursor to EDS CH SET, and press ENTER. BRIGHT AUTO CLOCK SLEEP PIC. FLIP 6 Press c/d to select AUTO or RETURN MANUAL. EDS CH SET [AUTO ] ENTER DISPLAY MENU EDS CH [––– ] START AUDIO ENTER/ MUTE ONLY CC TV/VIDEO a/b/c/d FLASH- BACK 7 Press a/b to move the cursor to VOL CH START, and press ENTER. ENTER MENU ADJUST : ENTER : EXIT: MENU PLEASE WAI T NOW SEARCH I NG T IME If you do not know th
ページ19に含まれる内容の要旨
SETTING THE CLOCK (Continued) MANUAL CLOCK Setting If there are no channels with EDS signals, set the clock manually using MANUAL CLOCK. 1 Press MENU to display the MENU MENU SLEEP TIMER screen. AV ADJUST BRIGHT PRESET SLEEP PIC. FLIP CLOSED CAPTION 2 Press a/b to move the cursor to V–CHIP BLOCK SET UP, and press ENTER. ENTER SET UP DISPLAY MENU ENTER/ AUDIO MUTE CC TV/VIDEO ONLY a/b/c/d 3 Press a/b to move the cursor to SET UP FLASH- BACK RETURN CLOCK, and press ENTER. VOL CH BLUE SCREEN [OFF]
ページ20に含まれる内容の要旨
BASIC OPERATION TV signals in your region This product is factory set to comply with the TV broadcasting system in the United States. For Brazil, Argentina and Uruguay, set the color system according to the country before using this product by following the table below. LC-13S2U, LC-15S2U The VIDEO INPUT mode is compatible with color systems worldwide and is automatically set. The World Multi Auto System Factory setting of color system User setting is compatible with all color TV broadcasting
