ページ1に含まれる内容の要旨
ORE". _o..o_ooY_,N.O_.,ON
32" Commercial Grade HD LCD Television
LC32VHSHTL
AIR (TV)/CABLE MODE SELECTION
The Air/CABLE menu option is set to the "CABLE" (Cable Television) mode at the factory.
If you want to use an antenna for the built-in TV tuner, this menu option must be set to the
"Air" mode. Please refer to page 17 of the owner's manual for the details of this menu.
ページ2に含まれる内容の要旨
Contents Contents 2 Caution 3 Safety Information 4 Instructions for fixing stand Unit and Accessories 5 Product Feature 5 Introduction 6-9 1. Front View 6 2. Rear View 7 3. Remote Control 8-9 Basic Operation 10-11 OSD Menu 12-20 1. Picture menu 12 2. Audio menu 13 3. Time menu 14 15 4. Setup menu 5. Lock menu 16 6. Channel menu 17-18 Specialty Hotel and Commercial Features 19-24 Simple Troubleshooting 25 Technical Specifications 26
ページ3に含まれる内容の要旨
Caution Caution The lightening flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of un-insulated "dangerous voltage" within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons. The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
ページ4に含まれる内容の要旨
Safety Injbrmation Safety Information To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below. Electrical safety • The TV set should only be connected to a mains supply which matches that stated on the label on the mains adaptor • To prevent overload, don't share the same mains supply socket with too many other items of equipment. -Do not place any connecting wires where they may be stepped on
ページ5に含まれる内容の要旨
Instructions _br jixing stand Instructions for fixing stand Note: the pictures below are only for reference B A 1 1. Insert stand(part A) into unit(part B). 2 5xM4x15 2. Screw the stand in the position as the picture shows. Screws (5 x 2836/M4 x 20) are provided with stand. 4
ページ6に含まれる内容の要旨
Unit and Accessories and Product Feature Unit and Accessories u= TV set Stand Security Cover User's Manual User's manual Remote control Mains cable Lock Batteries: 2xAAA Screws for security plate(3xST4x20C) Screw driver= T20 44 ." (2xMgxlO) (2xST4x12C) Screws for security cover Screw driver= T15 Security Plate Screws for stand (5 x M4 x 15) Product Feature • Integrated ATSC TV tuner for HDTV broadcast reception • Dual HDMI input for true digital connections • VGA port for connection to PC • Clon
ページ7に含まれる内容の要旨
Introduction Introduction 1. Front View _0 go _0 sO _o x_ _o ;o ! Power Indicator Remote Control window (Keep clear) 1. (IR) Infrared Receiver: Receives IR signals from the remote control. (Power on/Standby)LED Indicator: Press Power Button to turn on and off. Indicator on(Red) Standby mode Power on mode Indicator on(Green) The effective receiving range for the signal is 5-8 metres from the front of the remote control window, and 300 to the left or right side and 200 above or below the remote co
ページ8に含まれる内容の要旨
Introduction 2. Rear View & Service _ _2_ _ IIE_la_l ...... oo._× 1. AC POWER IN: Connect to an earth 100-240V, 50/60Hz AC outlet with the PowerCable. 2. POWER SWITCH: Switch on or off the power suply. 3. HDMII/2: Connect them to the video output terminal of DVD.(used in HDTVl mode) 4. PC AUDIO IN: Connect it to the audio output terminal of PC. 5. VGA: For PC display. Connect it to the D-Sub 15 pins analog output connector of the PC. 6. YPbPr : Connect them to the video output terminal of DVD.(u
ページ9に含まれる内容の要旨
Introduction 3. Remote Control The remote control is usin9 Infra-Red(IR). Point it towards the front of the LCD TV. The remote control may not work correctly if it is operated out of range or out of angle. ii!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i
ページ10に含まれる内容の要旨
Introduction Installing Batteries 1. Open the battery compartment cover on the back of the remote control. 2. Insert two 1.5V AAA size batteries observing the polarity markings inside the battery compartment. Don't mix different types or used batteries with new ones. 3. Close the cover. Batteries shall not be exposed to excessive heat such as sunshine or fire. - The remote control should be operated within 30 feet(7m) and 30 o to the left and right of the IR receive at the front of the LCD TV. -
ページ11に含まれる内容の要旨
Basic Operadon Basic Operation Power on/off 1. Connect to the power with a mains cable and an adaptor (page9). 2.-To turn on the TV Press POWER button on the TV or remote control. -To turn off the TV Press POWER button on the TV or remote control. Input Source select Press INPUT button on the TV set or remote control to display the input source menu, and use CH+/- button on the TV set or A / V button on remote control to select the input source, press OK button on the remote control to enter. No
ページ12に含まれる内容の要旨
Basic Operation Basic OSD Menu operation Press MENU button to display the OSD menu as below: i Use ( / > button to select the main menu, and press V button to enter the submenu. In the submenu, use A / V button to select the function item, and you could: adjust ("Contrast" item in Picture menu for example) with ( / > button; select ("Picture Mode" item in Picture menu for example) with ( / > button; enter the submenu ("Close Caption" item in Setup menu for example) with > button. * (Press MENU b
ページ13に含まれる内容の要旨
OSD Menu OSD Menu 1. Picture menu Picture mode: Select between Standard, Dynamic, Mild, Sports and User. You may select the picture mode directly by pressing the PICTURE button on the remote control. Contrast: Control the difference between the bright and dark regions of the screen picture. Brightness: Adjust brightness of the picture. Color: Adjust color of the picture. Tint: Control the fresh tones to make them appear natural. Sharpness: Set the amount of fine detail in the picture. Color Temp
ページ14に含まれる内容の要旨
OSD Menu 2. Audio menu Sound Mode: Select your desired picture mode as follow: Flat, Music, Movie, Sports and User You may select the sound mode directly by pressing the SOUND button on the remote control. Bass: Low frequencies intensity. Treble: High frequencies intensity. Balance: Left and right stereo audio channels balance. Surround: Activate or deactivate the Surround function. Audio Language: Select audio language. 13
ページ15に含まれる内容の要旨
OSD Menu 3. Time menu Sleep timer: You may set the automatic shutdown timer choosing from 5 to 240 minutes, or deactivate this function. Time zone: Select between Pacific, Alaska, Hawaii, Eastern, Central and Mountain. Daylight Saving Time: Select between On and Off. Clock: User can not change time manually during DTV mode, for time is from signal source directly. 14
ページ16に含まれる内容の要旨
OSD Menu 4. Setup menu Menu Language: Select OSD menu language. Transparency: Turn on or off the transparency menu function. Zoom Mode: Select the zoom mode between 16:9, 16:9 zoom, 4:3, 4:3 zoom. Noise reduction: Select the noise reduction mode between Strong, Off, Weak and Middle. PC SETUP: If the video input signal comes from your PC, you may adjust the V-Position, H-Position, Frequency, Phase or even perform an Auto adjustment. Closed Caption: CC Mode:Allow you to select the CC Mode among: O
ページ17に含まれる内容の要旨
OSD Menu 5. Lock menu You must enter the password to gain access to the Lock menu. The default password is 0000. You may modify the following options: Change password: Change the password, you must enter the new password twice to confirm it. Note: Do not forget the password. Lock: Allow you to turn on or off the system lock. If deactivated, the functions described below don't work. This option menu allows you to lock any TV channel or adjust the Movie rating filter. US: TV: Use/k / V buttons to
ページ18に含まれる内容の要旨
OSD Menu 6. Channel menu Air/Cable: Allow you to select antenna between Air and Cable. If you selet "Cable", the following items(Favorite, Show/Hide, Channel NO, Channel Label and DTV Signal) are unable to use. Auto Scan: Enter the Auto Scan menu to start auto scan. "k If you select "Cable" as input signal in Antenna item, allows you to select Cable System among: Auto, STD, IRC and HRC. Use V button to highlight the "Start to Scan", then press > button to search the channels automatically. The r
ページ19に含まれる内容の要旨
OSD Menu Show/Hide: Allow you to show or hide the channels. Use A / V button to highlight the desired item, then press OK button to show or hide the highlighted channel. > Channel No.: Show and select the channel. Channel Label: Allow you to setup a label for the channel. Press < / > button to select the position of the table, and press A / V button to select the words. DTV Signal: Show the quality of digital signal: good, Normal, Bad. 18
ページ20に含まれる内容の要旨
Specialty Hotel and Commercial Features Specialty Hotel and Commercial Features Securing the TV This TV can be secured to the surface of a desk or table using the included security plate and lock. To secure the TV: • Affix the security plate firmly to the surface of a desk or table in the position where you would like the TV to be located using 3xST4x20C type screws. Screw driver: T20 19
