ページ1に含まれる内容の要旨
MODELS
MODL e
// E3D320VX
e420d-A0
// E3D420VX
// E3D470VX
USER
GUIDE
INSTALLING YOUR New TV
CONTROLS & CONNeCTIONS
CONNeCTING YOUR DeVICeS
USING THe ON-SCReeN MeNU
USING THe USB MeDIA PLAY eR
USING VIZIO INTeRNeT APPS
HOw TO VIew 3D
TROUBLeSHOOTING & SUPPORT
HeLP, SPeCS, w ARRANTY & LeGAL
ページ2に含まれる内容の要旨
This product qualifies for ENERGY STAR in the “factory default” setting and this is the setting in which power savings will be achieved. Changing the factory default picture settings or enabling other features will increase power consumption that could exceed the limits necessary to qualify for ENERGY STAR rating. SRS StudioSound HD is a trademark of SRS Manufactured under license from Dolby HDMI, the HDMI logo and High-Definition Labs, Inc. StudioSound HD technology Laboratories. Dolby an
ページ3に含まれる内容の要旨
Welcome Thank You for Choosing ViZio iMPorTanT safeTY insTruCTions And congratulations on your new VIZIO HDTV. Your TV is designed and manufactured to operate within defined design limits. Misuse may result in electric shock or fire. To prevent To get the most out of your new VIZIO product, read these your TV from being damaged, the following instructions should instructions before using your product and retain them for future be observed for the installation, use, and maintenance of your
ページ4に含まれる内容の要旨
• Refer all servicing to qualified service personnel. Servicing • The power cord must be replaced when using different is required when the apparatus has been damaged in voltage than the voltage specified. For more information, any way, such as when the power-supply cord or plug is contact your dealer. damaged, liquid has been spilled or objects have fallen • When connected to a power outlet, power is always into the apparatus, the apparatus has been exposed to flowing into your TV. To to
ページ5に含まれる内容の要旨
cord and contact your dealer immediately. Do not try to • The mains plug or appliance coupler is used as the repair your TV yourself. disconnect device, the disconnect device shall remain readily operable. • Avoid using dropped or damaged appliances. If your TV is dropped and the housing is damaged, the internal • CAUTION - These servicing instructions are for use by components may function abnormally. Unplug the power qualified service personnel only. To reduce the risk of cord immediat
ページ6に含まれる内容の要旨
Lightning Protection TeleVision anTenna ConneCTion ProTeCTion For added protection of the TV during a lightning storm or when If an outside antenna/satellite dish or cable system is to be it is left unattended or unused for long periods of time, unplug connected to the TV, make sure that the antenna or cable system the TV from the wall outlet and disconnect the antenna or cable is electrically grounded to provide some protection against system. voltage surges and static charges. Power Li
ページ7に含まれる内容の要旨
Table of Contents Adjusting the Picture Settings ............................................19 Installing the TV ................................................ 3 Adjusting the Advanced Picture Settings ........................20 Inspecting the Package Contents .....................................3 Adjusting the Color Temperature ....................................21 Installing the TV ...................................................................3 Adjusting the Picture Size and Position
ページ8に含まれる内容の要旨
Adjusting the CEC Settings ..............................................32 Incorrect 3D Viewing Distance and Angle ......................44 Turning the VIZIO Logo On or Off .....................................33 Troubleshooting & Technical Support .............. 45 Using the Help Menu ..........................................................33 Specifications ................................................... 48 Displaying System Information ........................................34 Resett
ページ9に含まれる内容の要旨
Installing the TV 1 InspecTIng The package conTenTs InsTallIng The TV Before installing your new TV, take a moment to inspect the After removing the TV from the box and inspecting the package package contents. Use the images below to ensure nothing is contents you can begin installing the TV. Your TV can be installed missing or damaged. in two ways: • On a flat surface, using the included stand • On a wall, using a VESA-standard wall mount (not included) Installing the TV Stand Your TV includ
ページ10に含まれる内容の要旨
1 Back oF TV To install the base: 1. Place the TV screen-down on a clean, flat surface. To prevent scratches or damage to the screen, place the TV on a soft surface, such as carpet, rug, or blanket. 2. Align the base with the TV. 3. Insert and tighten the three(3) included hex screws into the base with the included hex wrench. 4. Move the TV with attached stand into an upright position and place on a flat, level, and stable surface. 5. To ensure proper ventilation, leave at least 1” of space
ページ11に含まれる内容の要旨
1 Installing the TV on a Wall To mount your TV on a wall, you will need a wall mount. Consult the information below to find the appropriate mount for your TV model: Installing a TV on a wall requires lifting. To prevent injury or damage to the TV, ask someone to help you. E420d-A0 Screw Size: M6 Screw Pitch: 1.00mm Screw Length: 12mm Hole Pattern: 200mm (V) x 200mm (H) Be sure the mount you choose is capable of supporting the weight of the TV. After you have determined that you have the cor
ページ12に含まれる内容の要旨
Controls and Connections 2 ReaR Panel USB - Connect USB thumb drive to play photo, music, or video. HDMI - Connect HDMI device. Stereo Audio Out - Connect RCA audio device, such as sound bar. Optical Audio Out - Connect optical/SPDIF audio device, such as home audio receiver. Coaxial - Connect coaxial cable from cable, satellite, or antenna. Component/Composite - Connect component or composite device. Ethernet - Connect ethernet cable from home network. HDMI - Connect HDMI device. Rear Pan
ページ13に含まれる内容の要旨
2 Side Panel POWER - Turn TV off or on. INPUT - Change input source. INPUT MENU MENU - Open the on-screen menu. CH ^ CHANNEL UP/DOWN - Change the channel. CH VOL ^ VOLUME UP/DOWN - Increase or decrease volume level. VOL Side Panel 7 ^ ^
ページ14に含まれる内容の要旨
2 FRont Panel REMOTE SENSOR When using the remote, aim it directly at this sensor. Front Panel 8
ページ15に含まれる内容の要旨
2 Remote ContRol aPP launCheR Quickly launch the pictured app. inPut PoweR Change the currently-displayed input. Turn TV on or off. a/V ContR olS inF o Control USB media player. Display the info window. CloSed CaPtionS enu m Open the closed caption menu. Display the on-screen menu. exit aRRow Close the on-screen menu. Navigate the on-screen menu. ok Guide Select the highlighted menu option. Display the info window. BaCk V Button Go to the previous on-screen menu. Open the VIA dock
ページ16に含まれる内容の要旨
2 Replacing the Batteries 1. Remove the battery cover. 2. Insert two batteries into the remote control. Make sure that the (+) and (-) symbols on the batteries match the (+) and (-) symbols inside the battery compartment. 3. Replace the battery cover. 10
ページ17に含まれる内容の要旨
Connecting Your Devices 3 ConneCting A DeviCe Your TV can be used to display output from most devices. 1. Verify that your device has a video port that matches an available port on the TV (HDMI, Component, etc). Cable/Satellite Box 2. Turn the TV and your device off. 3. Connect the appropriate cable (not included) to the TV and the device. 4. Turn the TV and your device on. Set the TV’s input to match DVD/Blu-ray Player Game Console the connection you used (HDMI-1, HDMI-2, etc). BACK oF tv •
ページ18に含まれる内容の要旨
3 ConneCting An AUDio DeviCe Your TV can output sound to an audio device, such as a receiver or sound bar. 1. Verify that your device has a video port that matches an Home Audio Receiver available port on the TV (Optical, RCA, etc). 2. Turn the TV and your audio device off. 3. Connect the appropriate cable (not included) to the TV and the device. 4. Turn the TV and your device on. VIZIO Sound Bar BACK oF tv gooD RCA Stereo Cable BetteR Optical/SPDIF Cable CONNECTING AUDIO DEVICE 12
ページ19に含まれる内容の要旨
3 ConneCting to YoUR netwoRK Your TV is internet-ready. It can be connected to your home Connecting to a Wireless Network network with a Wired or Wireless connection. 1. Ensure you have a router or modem broadcasting as high-speed wireless signal (802.11n recommended). Connecting to a Wired Network (Best) 2. Use the Guided Network Setup to configure the TV. See Using 1. Connect an Ethernet cable to your router and to the Guided Setup on page 35 Ethernet port on the back of the TV. See below.
ページ20に含まれる内容の要旨
Completing the First-Time Setup 4 The first time you turn on the TV, the Setup App will guide you 4. Select the name of your through each of the steps necessary to get your TV ready for use. wireless network from the list of available networks and press Before you begin the first-time setup: OK. • Your TV should be installed and the power cord should Enter the network key using be connected to an electrical outlet. the on-screen keyboard, then • Your devices should be connected. highlig
