ページ1に含まれる内容の要旨
OWNER’S MANUAL
GUIDE D’UTILISATION
22” WIDE TFT LCD TELEVISION WITH DIGITAL TUNER
TÉLÉVISEUR GRAND ÉCRAN ACL TFT DE 22 po AVEC
SYNTONISEUR NUMÉRIQUE
(22” class/21.56 diagonal)
LT-22E710
(22” classe/21,56 diagonale)
ATTENTION
ATTENTION
If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the
required programming code.
Si vous utilisez avec cet appareil une télécommande universelle (autre que celle vendue avec ce téléviseur),
consultez
ページ2に含まれる内容の要旨
ENGLISH The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. CAUTION: TO REDUCE THE RISK OF ELECTRIC The exclamation point within an equilateral triangle is intended to SHOCK, DO NOT REMOVE COVER alert the user to the presence of (OR BACK). NO USER-SERVICEABLE important operating
ページ3に含まれる内容の要旨
15) Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as vases, should not be placed on the apparatus. 16) An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fa
ページ4に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS 20) When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 21) Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition. 22) When you connect th
ページ5に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS CONDENSATION Moisture will form in the operating section of the unit if the unit is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, unit's performance will be impaired. To prevent this, let the unit stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually. Condensation may also form during the summer if the unit is exposed to
ページ6に含まれる内容の要旨
How to attach the stand NOTE: • Unplug the AC cord from the AC INPUT terminal. • Before beginning this process, assure that TV is laid on a clean, safe, and cushioned space to avoid any damage to the unit. • Do not touch or press the LCD screen, glass might break under pressure. Place the TV on its front onto a table. Align the stand’s bottom-plate (supplied) as seen here. It will fi t in only one direction. Hold the unit and attach the stand slowly. LCD PANEL SIDE Finally secure the bottom-plat
ページ7に含まれる内容の要旨
Features • LED Backlight System - It realize thin profile, low power consumption, eco-friendly Hg-less design and high contrast picture. • Integrated Digital Tuner - You can view digital broadcasts without using a Digital TV Set-Top Box. • Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for hearing impaired viewers. • Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote control adjustment of BRIGHTNESS
ページ8に含まれる内容の要旨
Contents Before using your unit IMPORTANT SAFETY INSTRUCTIONS ...........3 SAFETY PRECAUTIONS .................................5 How to attach the stand ....................................6 How to remove the stand ..................................6 F eatures ............................................................ 7 Power source ....................................................7 Contents ...........................................................8 Parts and functions ..................
ページ9に含まれる内容の要旨
Parts and functions Left side Front HDMI IN jack VIDEO IN jacks (VIDEO/AUDIO (L(MONO)/R)) Right side DIGITAL AUDIO COAXIAL OUT jack COMPONENT IN jacks (Y/Pb/Pr/ AUDIO (L(MONO)/R)) AC INPUT jack RF (ANT.) IN jack Remote sensor HEADPHONE jack Power Indicator Red : Standby Blue : On MENU VOLUME –/+ buttons POWER button button CHANNEL / buttons INPUT/ENTER button To display the menu screen. Touch MENU button to display the menu screen. CHANNEL / buttons, VOLUME –/+ buttons and INPUT/ENTER but
ページ10に含まれる内容の要旨
Remote control 6.CURSOR ▲/▼/◀/▶ Buttons - Used to operate the 12 menu functions of the LCD TV. 1 13 7.ENTER Button - Use to enter or select 2 information for On-Screen operations. 8.MUTING Button - To turn off the sound, press 3 this button once. The LCD TV will be silenced and the symbol “Muting” will appear on the screen. 4 14 The muting feature can be released by pressing the MUTING button again or one of the VOL 5 15 (VOLUME) + or – buttons. 9.VOL (VOLUME) + / – Buttons - Press the +
ページ11に含まれる内容の要旨
Antenna connections If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a Cable TV service, see “Cable TV connections”. Combination VHF/UHF Antenna (Single 75 ohm cable) Antenna Connect the 75 ohm cable from the combination Jack VHF/UHF antenna to the antenna jack. 75 ohm Coaxial Cable Cable TV connections This TV has an extended tuning range and can tune most cable channels without using a Cable TV Converter
ページ12に含まれる内容の要旨
Connections to other equipment The exact arrangement you use to interconnect various video and audio components to this unit is dependent on the model and features of each component. Check the Owner’s Manual provided with each component for the location of video and audio inputs and outputs. To connect the LCD TV to a VCR Rear of the unit VCR To VIDEO/AUDIO IN To Video/Audio OUT Video/Audio cord (not supplied) To connect to a DVD player with Component Video Input You can enjoy a high quality p
ページ13に含まれる内容の要旨
Connections to other equipment (continued) Using an AV Amplifier with built-in digital surround If you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including Dolby Digital Surround audio that sounds just like the movie. Connect an AV amplifier with built-in Dolby Digital decoder, etc. as shown below. Rear of the unit Front Speaker Subwoofer (Right) TV Front Speaker (Left) Digital Audio Coaxial Output Coaxial digital cable (not supplied)
ページ14に含まれる内容の要旨
Connections to other equipment (continued) To connect a HDMI or a DVI device to the unit The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device. When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate analog audio cords required. Rear of the unit To HDMI out HDMI device or To HDMI IN DVI device HDMI cable (type A connector) To PC/DVI AUDIO IN (not supplied) To DVI outp
ページ15に含まれる内容の要旨
TO SELECT ANALOG CHANNELS Starting setup 1-9: Press 1-9 as needed. Example, to select channel 2, press 2, then press The Starting Setup menu appears the first time ENTER. you turn on the TV, and assists you to specify the 10-99: Press the 2 digits in order. Example, Air/Cable setting, and program your channels to select channel 12, press 1, 2, then automatically. press ENTER. 100-135: Press the 3 digits in order. Example, to IMPORTANT: Make sure that the antenna or cable select channel
ページ16に含まれる内容の要旨
Quick guide for menu DISPLAY Press DISPLAY to display the current information on operation the screen. When the TV receives a digital signal, the digital Call menu and for example: Select Language. information will appear. Press INPUT SELECT to select TV mode. Sleep Timer 1 62-1 HDTV Moving Picture1 Off CH-1 TV-MA Digital Air English No Program Information is available 2 Press MENU. The TV menu screen will appear. Main Menu >> Picture Full Audio 1080i Channel Lock Setup • Channel number
ページ17に含まれる内容の要旨
Convenience functions You can change the default settings by pressing the Menu button on your remote, then select the one of the icons at the top of the menu - follow the On-Screen prompts to set your preferences. Icon Selected Items Setup hint Picture Picture Brightness /Contrast / You can adjust the picture quality to your preference. Setting Sharpness / Color / Tint Color Temperature Bluish (Cool) / Neutral (Standard) / Reddish (Warm) Backlight The Backlight feature adjusts the screen brig
ページ18に含まれる内容の要旨
The TV will begin memorizing all the channels Memorizing channels 4 available in your area. • It may take from 15 minutes to 30 minutes to This TV is equipped with a channel memory complete memorizing digital cable channels. feature which allows channels to skip up or down Depending on the reception condition, a bar to the next channel set into memory, skipping display may not advance for several minutes, over unwanted channels. Before selecting please be patient. channels, they must be
ページ19に含まれる内容の要旨
Ch Label Clear All Channel Number 15-1 All channels are deleted from the channel memory. Ch Label Label Clear >> Select “Channel”, then press ▶ or ENTER. 1 2 Press ▲ or ▼ to select “Add/Delete”, then press ▶ : Select : Adjust or ENTER. 4 Press ◀ or ▶ repeatedly until the character you 3 Press ▲ or ▼ to select “Clear All”, then press ▶ or want appears in the first space. ENTER. Ch Label Add/Delete Channel Number 15-1 Adding Channel >> Ch Label A Add/Delete >> Label Clear >> Clear All >> : Sele
ページ20に含まれる内容の要旨
Genre: Setting the V-Chip ALL : All D : Dialogue An age limitation can be set to restrict children from L : Language viewing or hearing violent scenes or pictures that you S : Sex may choose to exclude. The restriction applies to “TV V : Violence Rating” and “Movie Rating” if this data is transmitted. FV : Fantasy Violence You may set this restriction separately. To use the V-Chip function, you must register a password. Movie Rating Movie Rating To register a password G PG PG-13 Se
