ページ1に含まれる内容の要旨
Register your product and get support at
www.philips.com/welcome
32PFL1409/93
42PFL1609/93
47PFL1609/93
EN User manual
ページ2に含まれる内容の要旨
Contents Guide for Preparatory Work IMPORTANT SAFETY INSTRUCTIONS .................................................. 2 SAFETY PRECAUTION ........................................................................... 3 Panel control and rear terminal control ..................................................... 6 Preparation of remote control ................................................................. 10 Descriptions of remote control function ..................................................
ページ3に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS Explain of Symbol Dear Philips’ users : Thanks for using Philips’ color LCD TV. Below is the explain of marking in the user manual to make it available when you read user manual and use color LCD TV. Warning To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or aplashing. Do not put any objects filled with liquids, such vases, cup or dressing cases on the
ページ4に含まれる内容の要旨
SAFETY PRECAUTION Install/ Setting To reduce the risk of fire, electric shock , damage and/or personnel hurt , pls. accord to below instruction when install and use TV set Install Install the plat TV set to wall by skilled personnel Incorrect installation is not safety for you and your TV set. Install the TV set near the convenience AC power receptacles.Put the TV set on the stable plane. Use wall mount or base for your safety Do not install the TV set near the high heat location, l
ページ5に含まれる内容の要旨
Keep the min. space marked above around the TV set. Ventilation Do not block the ventilation opening or insert any object in the enclosure. Keep spec around the TV set as above illustrate. Do not install your TV set as below illustrate Transit Disconnect all power cord before transit the TV set. Transit the big size TV set by two or more person. Grasp the four foreland of TV set and do not press the panel when transit the TV set. Hold the bottom when put up or move the TV set.
ページ6に含まれる内容の要旨
Keep power cord away from heat source Withdraw power cord plug and clean it periodical. The insulation may damage and even cause fire if the power cord is covered by dusty and vapor. Do not refit power cord Do not put heavy object against the power cord Do not pull power cord when withdraw it Do not connect too many equipment in the same AC power receptacle. Do not use the incorrect AC receptacle. Placement Put the TV set on stable position, otherwise it may drop and damag
ページ7に含まれる内容の要旨
Do not use TV set when the surface is damaged. And do not touch TV set before disconnect from AC power source, otherwise may cause elec- tric shock. Disconnect the AC power cord immediately under below situation: Power cord damaged AC power receptacle is incorrect TV set is falling , knocked or bumped caused damaged Any liquids or solid objects fall into TV set from opening. Precaution for Safety It is benefit to use this TV set in the weak electromagnetism interference su
ページ8に含まれる内容の要旨
For Child Do not let child climb on the TV set Put small accessory out of reach by child to avoid child swallow it down carelessly. Precaution Watching TV Watching TV under proper beam. For watching TV under weak beam or watching for a long time will damage your sight. Adjust volume properly to avoid audition hurt by high volume when using earphone. Display The TV set is manufactured by high precision technology and there may be some light or pixel loss in the display. This
ページ9に含まれる内容の要旨
Panel control and rear terminal control Explanations: The following illustration is for your convenience to recognize where all terminals are located and to connect peripheral equipment; due to the product improvement, the indications may be different from the actual one. The actual indications shall prevail. Side control panel Side control panel 3 4 2 1 5 Explanations on the keys on the side of the TV set and their functions 1 INPUT: Recall / Close the signal source menu. 2 MENU
ページ10に含まれる内容の要旨
Panel control and rear terminal control Side CVBS and rear terminals 3 2 PC IN AUDIO TV ANTENNA HDMI1 COMPONENT1 HDMI2 Y PB PR L R VIDEO L R S-VIDEO VIDEO L R COMPONENT2 VIDEO L R Y PB PR L R HDMI3 CVBS 2/S-VIDEO 9 5 10 8 9 1 4 6 7 Explanations on the rear terminals and their functions: 1 COMPONENT: Color aberration component (YCbCr, YPbPr) Video/ Audio Input Terminal 2 AUDIO: VGA audio input terminal 3 PC IN: VGA video input terminal 4 CVBS 1 IN: CVBS-1 audio/video input terminal
ページ11に含まれる内容の要旨
Preparation of remote control Installation of remote control batteries •• As shown in the following diagram, put the remote control upside down and push open the battery chamber. •• Insert 2 AAA batteries as shown in the following diagram.(The positive and negative poles must correspond to the indication). •• Put back the battery chamber cover in place. 1 3 2 Never use rechargeable batteries, such as nickel-cadmium batteries.Such batteries are different in shape and performance, proper ope
ページ12に含まれる内容の要旨
Descriptions of remote control function Using remote control Note:Pressing most buttons once will activate the assigned function. Pressing a second time will de-activate it. When a button enables multiple options, a small list will be shown. Press repeatedly to select the next item in the list. The list will be removed automatically after three seconds or press OK to remove immediately. POWER WIDE BUTTON Press to turn the LCD TV On or off Press this button to display a list of available displa
ページ13に含まれる内容の要旨
Connection and preparation of the TV set Packing lis Power cord DFU Remote control If you prepare TV for wall mounting,please call service personnel to install. Guarantee the safety of TV. If you need to place the TV unit on the desktop,please buy the base assembly additional,the installation instruction of base assembly as follows: 32”/42” base installation 1. Place TV unit face down on a soft and fl at surface(blanket,foam,cl oth,etc.) to prevent damage to the TV. remove 4 pieces of scre
ページ14に含まれる内容の要旨
2. As indicated in the illustration, put the cover_stand on the a base (the 32” TV overleap this step, turn into the next step b directiy). 3. Put the base assembly on the right position of rear cover as indicated in the illustration. 4. Insert the screws back to the right position as indicated in the illustration by cross-shaped screwdriver. the 32”TV use the primary screws, the two long screws in the pe bag for accessory instead of the two pieces of screws primary in the bottom posi
ページ15に含まれる内容の要旨
47” base installation 1. Place TV unit face down on a soft and flat surface(blanket,foam,c loth,etc.) to prevent damage to the TV.remove 6 pieces of screws as indicated in the illustration by cross-shaped screwdriver. Remove six pieces of screws 2. Take out the base assembly out of the box, and put the cover_ stand and base on the table. Cover_stand base 3. Put the base on the right position of monitor and lock it tightly. Remove the two pieces of screws which mared before Inserting the scre
ページ16に含まれる内容の要旨
4. Insert the screws back to the right position as indicated in the illustration by cross-shaped screwdriver. the two long screws in the pe bag for accessory instead of the two pieces of screws primary in the bottom position (attention:there are two type of screws as indicated in the illustration,it must be inserted the right type of screws to guarantee the safety of TV). (the screw thread is dense) (the screw thread is sparse) 5. Place the TV unit o
ページ17に含まれる内容の要旨
Backboard singal source interfaces There are a lot of signal sources that can be connected to your TV set. The following diagram shows how to connect them. Friendly tips: If you want to hang the TV set on a wall, all connecting lines must be inserted into the ports of the TV set in advance. Whenever a peripheral equipment is connected to the TV set, be sure the TV set is powered off. While connecting peripheral equipment, connect the cable to the terminal with the same color as its own. PC
ページ18に含まれる内容の要旨
Side signal source interfaces SIDE IO S-VIDEO VIDEO L R HDMI3 CVBS 2/S-VIDEO Earphone socket: The user may use the earphone via the earphone socket. CVBS-2 /S-VIDEO input: Connect the VIDEO outputs or S-VIDEO outputs of DVD player, LCD player, video recorder or video camera, etc. to the VIDEO input or S-VIDEO input of the TV set. (S-VIDEO is shared with the CVBS audio) Audio input: Connect the audio signal source (PC, DVD player, LCD player, video recorder or video camera, etc.) to the au
ページ19に含まれる内容の要旨
Preset and watch TV The following is how to use the On/Off key ( ) on the TV remote control to turn on/ off the TV set. (Press the key Channel +/- in standby mode may power on the unit, its the same for the side panel and the remote control. Power On/Off 1. While switching on the AC power supply, the red indicator lamp stands for standby mode, while the blue indicator lamp stands for power on. 2. If the TV set is in standby mode, press the On/Off key on the remote control to power on. 3. Pres
ページ20に含まれる内容の要旨
Menu operation 1. Pressing the menu button may display or exit the main menu. 2. In the main menu, you may use the / key to select the functional options to be adjusted by moving up or down, press the > to enter the sub-menu adjustment, and press the menu key to exit the main menu. 3. In the sub-menu, you may use the key to make adjustment, use the / key to select the previous/next option, and press the menu key to go back to the previous level. Signal source menu Press "SOURCE" but
