ページ1に含まれる内容の要旨
ASSEMBLY & OPERATING INSTRUCTIONS FOR OUTDOOR
GAS GRILL
FOR MODEL 720-0001-R OUTDOOR GRILL
ページ2に含まれる内容の要旨
TABLE OF CONTENTS TABLE OF CONTENTS Safety Instructions…………………………...1-4 Assembly Instructions………………………..5 Lighting Instructions…………………………6 Care & Maintenance…………………………7 Cooking Instructions…………………………8 Lighting Rod Assembly Instructions………..9-10 Illustrated Parts Breakdown………………...11 Parts List……………………………………...11 Trouble Shooting……………………………..12 Limited Warranty…………………………...13
ページ3に含まれる内容の要旨
Safety Instructions READ THE FOLLOWING INSTRUCTIONS CAREFULLY AND BE SURE YOUR GRILL IS PROPERLY INSTALLED, ASSEMBLED AND MAINTAINED. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN SERIOUS BODILY INJURY AND/OR PROPERTY DAMAGE. IF YOU HAVE QUESTIONS CONCERNING ASSEMBLY OR OPERATION, CALL OUR SERVICE CENTER AT 1-800-913-8999, MONDAY THROUGH FRIDAY 8:00AM-5:00PM, PACIFIC COAST TIME. NOTE TO INSTALLER: LEAVE THESE INSTRUCTIONS WITH THE CONSUMER AFTER
ページ4に含まれる内容の要旨
Safety Instructions Read carefully before assembling and operating your gas grill. INSTALLATION This gas grill must be installed in accordance with the local codes or, if in an area without local codes, with the latest edition of the National Fuel Gas Code ANSI Z223.1. In Canada, installation must conform to the standard CAN/CGA 1-b149.1 and/or .2 (Installation Code for Gas Burning Appliances and Equipment) and any local codes. THE LOCATION FOR YOUR GRILL Do not use your gas grill
ページ5に含まれる内容の要旨
BURNER VALVE/REGULATOR: The burner control is actually a regulator/valve assembly. The regulator attaches directly to the end of the burner, which extends out of the right end of the grill body, a 1-pound propane cylinder threads into the regulator. The burner control operates in the following positions indicated by the pointer at the top of the regulator as installed on the grill: OFF – This stops the flow of gas to the burner. PUSH TO TURN ON – You must push “IN” on the knob to release
ページ6に含まれる内容の要旨
The threaded cylinder connection should be kept clean and free of dust, dirt, sand or any foreign materials. Clean both regulator and LP cylinder threaded areas prior to connecting cylinder with regulator. Keep any electrical supply cord or fuel supply hose away from any heated surfaces. COOKING TEMPERATURE SETTINGS HIGH – Approximately 450 degrees F MED – Approximately 400 degrees F LOW – Approximately 350 degrees F NO
ページ7に含まれる内容の要旨
Assembly Instructions PLEASE READ THE INSTRUCTION CAREFULLY AND FOLLOW STEP BY STEP. Your Beefmaster Explorer grill is pre-assembled. The only part that you need to assemble is to connect gas regulator into your grill. 1. Locate the gas regulator. Grasp the regulator with the knob facing directly up. Line up the collar on the regulator with the open end of the burner tube. 2. Screw the regulator into open end of burner. 3. Once the regulator is in as far as it will go. Turn it
ページ8に含まれる内容の要旨
Lighting Instructions 1. Make sure the regulator is properly secured into the burner end. 2. Make sure the propane cylinder is tightly threaded into the regulator-hand-tighten only. 3. Open lid. 4. Locate lighting access hole on right side of the panel. 5. Insert match or lighter through access hole next to the burner tube. Keep flame next to burner. 6. Push gas burner control knob “IN” and turn counter-clockwise to “Lighting Position” 7. If ignition does not occur in 3-5 seconds,
ページ9に含まれる内容の要旨
Care & Maintenance There is very little care and maintenance needed. The Beefmaster Explorer is designed and made of materials that will last many years with normal use. Following these instructions will improve the longevity and quality of cooking. To ensure safe operation of your grill, the area of cooking should always be kept free of combustible materials of any type, such as gasoline or other flammable vapors or liquids. 1. Outside of body – This is stainless steel. It can be clean
ページ10に含まれる内容の要旨
Cooking Instructions 1. Allow grill to warm up with lid closed for 20-30 minutes prior to cooking. 2. This Beefmaster Explorer model is equipped with an adjustable HIGH/MED/LOW burner control. This allows for complete flexibility in cooking temperatures. HIGH setting has a cooking temperature of approximately 450 degrees F. MED is approximately 400 degrees F. LOW is approximately 350 degrees F. 3. The cooking times we suggest are only that – suggestions. You may want to vary the times
ページ11に含まれる内容の要旨
ページ12に含まれる内容の要旨
ページ13に含まれる内容の要旨
ILLUSTRATED PARTS BREAKDOWN MODEL 720-0001-R TABLE-TOP GRILL MODEL 720-0001-R-LP PARTS LIST REF# DESCRIPTION Q’TY 1 Lid, Front 1 SET 2 Bowl Assembly 1 SET 3 Handle Assembly 1 SET 4 Cooking Grid 1PC 5 Flame tamer 1 PC 6 Grease Tray 1PC 7 Burner 1 PC 8 Name Plate 1 PC 9 Regulator LP 1 SET 10 Foldable Leg 4 SET 11 Gas Collector Box 1PC 12 Latch 1SET 13 Grease Tray Stopper 1PC 11
ページ14に含まれる内容の要旨
TROUBLE SHOOTING SPIDER AND INSECT WARNING!!! 1. The smell of gas in conjunction with the burner Spiders and insects can nest in the burners of the flames appearing yellow. grill and cause the gas to flow from the front of the 2. The grill does not reach temperature. burner. This is a very dangerous condition, which 3. The grill heats unevenly. can cause a fire to occur, thereby damaging the grill 4. The burners make popping noises. and making it unsafe to operate. BEFORE CALLING
ページ15に含まれる内容の要旨
LIMITED WARRANTY MODEL 720-0001-R STAINLESS STEEL OUTDOOR GAS GRILL Nexgrill Industries, Inc. warrants to the original consumer purchaser of each Outdoor Gas Grill that when subject to normal residential use, it is free from defects in workmanship and materials for the periods specified below. This warranty excludes grills used in rental or commercial applications. Component Warranty Period: Burners: 3 Years
