ページ1に含まれる内容の要旨
OWNER'S MANUAL
AVN2210p
In-Dash Portable Navigation with
CD/USB Multi-Source Receiver
We appreciate your purchase of this receiver.
Please read through this manual for correct operation.
We suggest that after reading it you keep this manual
in a safe place for future reference.
ページ2に含まれる内容の要旨
For your safety in using the AVN2210p Warnings and caution signs, illustrated below, are posted throughout this manual as well as on the AVN2210p. They show safe and correct ways to handle the product so as to prevent personal injury to you, others and to avoid property damage. Please read through the "Warning" and "Caution" notes before reading the owner's manual for operational features and functions. This sign indicates a situation in which incorrect handling or Warning disregard of this sig
ページ3に含まれる内容の要旨
WARNING ● Air bags are a vital part of an safety system. Never install main unit in a way which will alter air bag wiring or interfere with air bag deployment. Air bags must function properly in the event of an accident. ● When installation is complete, test all vehicle electrical systems for proper operation, including lights, horn, brake lights, and emergency flashers. ● For your protection, never use a power drill without safety glasses or goggles. Debris or broken drill bits may cause seve
ページ4に含まれる内容の要旨
CAUTION ● Wiring and installing this main unit requires expertise and experience. Professional installation is recommended. Consult with your dealer or a professional installer. Incorrect wiring may damage the main unit or interfere with safe vehicle operation. ● Use only the accessory parts as specified. Using other parts may cause damage to the main unit or cause parts to dislodge and fall or fly off the main unit. ● Do not install the main unit in places where it may be exposed to dew conden
ページ5に含まれる内容の要旨
Operating Precautions Notes on Operation • For your safety, play only at moderate volumes so that you can still hear exterior sounds. • Discs with the logo shown to the left can be played. • You can play music CDs (CD-R/CD-RW) on this player. Be sure to use discs that have been properly processed. Depending on the editing format and software used, some discs may not play properly. TEXT • Do not in
ページ6に含まれる内容の要旨
Basic Operation Adjusting the Sound Muting the Volume Press the [MUTE] button. 1 To cancel muting, either press the [MUTE] button again or turn the [VOL] rotary knob to the right. While the audio system is muted, navigation voice guidance continues unmuted. Setting Guide Tone Press the [FUNC] button to establish the FUNCTION mode. 1 Press the [FUNC] button until the indication on the sub display switches to 2 BEEP. Press the [SELECT (Right/Left)] button to switch between ON and OFF status for 3
ページ7に含まれる内容の要旨
Switching Audio Control Modes The modes will switch one step in the order shown below each time the [ENTER] 1 button is pressed. BASS MID TREB BAL FAD NON-F NF-P LPF LOUD SVC VOL BASS ... Turn the [VOL] rotary knob to the right or left in the audio mode while referring to the table below to adjust the sound. Mode Function [VOL] rotary knob/Function Turn to the right Emphasises low sounds. BASS Adjusts bass level. Turn to the left Softens low sounds. Emphasises mid range
ページ8に含まれる内容の要旨
Mode Function [VOL] rotary knob/Function LPF ON : Only allows lower Turn to the right frequencies (low range) through. LPF Adjusts frequency (Low Pass Filter for LPF OFF : filtering settings. Sub-Woofer output) Allows all frequencies Turn to the left through regardless if the frequencies are low or high. Accentuates low and high frequencies Turn to the right ON when the volume is low. LOUD (LOUDNESS) When loudness is ON, the apparent deficiency in the high Turn to the left OFF sound
ページ9に含まれる内容の要旨
Switching Between the Audio and Navigation Screen Each time you press the [SCREEN] button the display switches between the 1 audio screen and the navigation screen. Turning the PND Display ON and OFF While the PND display is OFF, press the [SCREEN] button. 1 The PND display will come ON. Press the [SCREEN] button for longer than one second while the PND display is 2 ON. The PND display will go OFF. ● Note ● For details on using the PND, refer to the operation manual of the PND.
ページ10に含まれる内容の要旨
Switching Between Left and Right Speaker Output for the Navigation Voice Voice guidance speaker output can be switched between the right and left speakers. Press the [SOURCE/PWR] button for more than one second to turn the audio 1 mode OFF ("GOOD BYE" will momentarily be displayed). You can switch between right and left speakers by pressing the [FUNC] button 2 and the [SCREEN] button simultaneously for more than 3 seconds. RIGHT LEFT RIGHT: Output from the right front speaker LEFT: Output f
ページ11に含まれる内容の要旨
Using the Audio Cover Using the Audio Cover After removing the PND from the main unit, it is recommended to use the optional Audio Cover which comes with TRK-107p*. * TRK-107p: Sold separately How to Insert the Audio Cover Insert the left end of the Audio Cover into the main unit. 1 Engage the catch at the left end of the Audio Cover with the lock on the main unit. Insert the Audio Cover. 2 Press the right end of the Audio Cover until it clicks into place.
ページ12に含まれる内容の要旨
How to Detach the Audio Cover from the Main Unit Press the [Release] button. 1 The right end of the Audio Cover detaches from the body of the main unit. Remove the Audio Cover. 2 Hold the Audio Cover on the right side, lift up and pull it toward you to remove it. ATTENTION If the Audio Cover gets wet, do not attach it to the main unit. ● Note ● After detaching the PND, you can fit the connector cover onto the back of the Audio Cover as shown below. Connector cover Audio Cover
ページ13に含まれる内容の要旨
How to Operate the Tuner Calling up Preset Channels Press the [MODE] button to select the preset channel mode. 1 Turn the [VOL] rotary knob to call up the station registered for a preset channel 2 between P1 and P6. Press the [ENTER] button. 3 The registered preset channel will be selected and the corresponding station will be received. Six stations can be memorised for each of FM 1, 2 and 3, and six stations can be memorised for AM, making a total of 24 stations. Calling up a Preset Channel fro
ページ14に含まれる内容の要旨
Memorising Stations Memorising Stations Manually Tune into the station to be memorised for the preset channel. 1 Press the [MODE] button to select the rotary select mode. 2 Turn the [VOL] rotary knob to select one of the preset channels P1 to P6. 3 Press the [ENTER] button until "PMEMORY" appears on the sub display. 4 The selected station is memorised and the preset registration number and frequency are indicated on the display. To manually set additional selected stations for the remaining pre
ページ15に含まれる内容の要旨
Memorising Stations Automatically Press the [FUNC] button to establish the FUNCTION mode. 1 Press the [FUNC] button until the sub display switches to ASM. 2 Press the [ENTER] button. 3 After "ASM ON" is displayed, automatic station selection will start. A search will be conducted from the lowest frequency through progressively higher frequencies and stations with strong reception will be memorised for preset registration numbers [1] to [6]. When the operation has ended the "ASM ON" indication w
ページ16に含まれる内容の要旨
How to Operate the CD/MP3/WMA Player About Compact Discs • The signal recorded on a compact disc is read by a laser beam, so nothing touches the disc surface. A scratch on the recorded surface or a badly warped disc may cause impaired sound quality or intermittent playback. Observe the following precautions to ensure high quality sound performance: • Do not leave an ejected disc in the disc slot for very long; the disc may warp. Discs should be stored in their cases and kept away from high temp
ページ17に含まれる内容の要旨
XXXX XXXX NO GOOD • Do not use accessories (stabilizers, protective seals, laser lens cleaners, etc.) sold for "improving sound performance" or "protecting CDs." The changes in CD thickness or outside dimensions made by these accessories may cause problems in the player. Please be sure NOT to attach any ring-shape protector (or other accessory) to your discs. Those protectors are commercially available and said to protect disc and to improve sound quality (and antivibration effect), but they c
ページ18に含まれる内容の要旨
About MP3/WMA ATTENTION The making of MP3/WMA files by recording from sources such as broadcasts, records, recordings, videos and live performances without permission from the copyright holder for uses other than personal enjoyment is prohibited. What is MP3/WMA? MP3 (MPEG Audio Layer III) is a standard format for audio compression technology. By using MP3 a file can be compressed to one-tenth the size of the original. TM WMA (Windows Media Audio) is format for audio compression technology. WMA
ページ19に含まれる内容の要旨
Media The media capable of playing MP3/WMA include CD-R and CD-RW discs. Compared to the CD- ROM media commonly used for music discs, CD-R and CD-RW discs are fragile in high temperature/high humidity environments and one section of the CD-R and CD-RW may become incapable of playback. Fingerprints or scratches on the disc may prevent playback or cause skipping during playback. Sections of a CD-R or CD-RW may deteriorate if left inside a vehicle for long periods of time. It is also advisable tha
ページ20に含まれる内容の要旨
Multi-Sessions Multi-sessions are supported, and CD-R and CD-RW discs with annotated MP3/WMA files can be played. However, when "Track at once" has been written, close the session or process the warning message. Use the same format for each session (don’t change the format). Playing MP3/WMA When a disc with recorded MP3/WMA files is inserted, the main unit first checks all the files on the disc. No sound is output while the main unit is checking the files on the disc. It is recommended that the
