ページ1に含まれる内容の要旨
ページ2に含まれる内容の要旨
Bluetooth GPS Receiver Table of Contents 1. Overview 1.1 Introductions ................................................................................................. 2 1.2 Main Features ................................................................................................ 2 1.3 Setting up ................................................................................................... 3~6 2. Dimensions HI-405 Dimension .........................................................
ページ3に含まれる内容の要旨
1. Overview 1.1 Introductions Haicom HI-405BT is a GPS (Global Positioning System) receiver in wireless Bluetooth interface. With HI-405BT, your mobile devices, such as PocketPC, laptopPC, tabletPC, etc. can receive GPS data wirelessly. The advantages of HI-405BT: 1. Bigger battery pack (1600mA) for longer continue working without changing or charging battery during navigation. 2. Bigger antenna reflective ground for better GPS satellite reception and electrical interference. 3. Bigger
ページ4に含まれる内容の要旨
1.3 Setting up: STEP 1: Unpack the inclusive battery transparent wrap. Put the battery (401-BTT) in the HI-405BT battery cabinet. Tear off the transparent Wrap before using Changeable Battery 3
ページ5に含まれる内容の要旨
STEP 2: Connect the inclusive AC charger to home electronic outlet or connect the inclusive DC charger to the car cigarette lighter. As soon as they connected, the solid red light turned on (stay on) meaning the battery charging. By connecting the Mini-1394 to USB cable (401-USB), HI-405BT can also be charged DC charger to car cigarette directly from the laptop PC's USB port. lighter (DC 12V ~ 24V) To the side of HI-405BT AC charger to home mini-1394 connector electronic outlet STEP 3: As
ページ6に含まれる内容の要旨
STEP 4: By pressing the power button on the top of HI-405BT (Keep push the power button for 2~3 seconds, the power will turned on), the red light on the side of HI-405BT stay on (the GPS not get 3D fixed yet) and the GPS receiver start searching the satellite data. Please make sure place the HI-405BT outdoor open space without blocking so that it can get the proper satellite signal. After the receiver get enough satellite data, the receiver is in 3D fixed and the red light start blinking.
ページ7に含まれる内容の要旨
STEP 5: By the time you press the power button, the blue light in front of HI- 405BT will also blinking (meaning the HI-405BT Bluetooth device is searching the host device and not get paired yet) Please consult the Bluetooth step by step connection guides from this manual section 5. The pin code is "0000" when asked the pin code. After the Bluetooth paired and connected, the blue light will be steady on. Symble LED Color Light Indication Blinking: The Bluetooth is searching the host Blueto
ページ8に含まれる内容の要旨
Unit: mm 2. Dimensions Top View: Button View: 84 Power button Battery cap 60 Front View Back View Bluetooth Power charging indicator indicator 29.5 Side View Mini-1394 female connector for GPS reception status LED MMCX external power in and antenna plug GPS signal out 7
ページ9に含まれる内容の要旨
3. Packaging 3.1 Standard Packaging: Model Name Model# 1. Bluetooth GPS receiver HI-405BT 2. Rechargeable Li-Polymer 3.7V 1600mAh Battery 401-BTT 3. Mini-1394 to USB cable 401-USB 4. AC Power adaptor with USB female plug USB-ACC 5. Cigarette Lighter Adaptor with USB female plug USB-DCC 6. HI-405BT User Manual MAU-405 7. Mini CD CDR-01 1 3 2 8
ページ10に含まれる内容の要旨
4 5 6 7 9 HI-405BT USER Manual
ページ11に含まれる内容の要旨
3.2 Optional Accessories: Model Name Model# 1. Magnetic Car Holder HOD-001 2. MMCX External Antenna ATN-MMC 3. Mini-1394 to PS/II Connecting Cable PS2-1394 Inside the battery cap, there is a metal plate for using with magnetic car holder to fix HI-405BT on the car front or back windows HOD-001 10
ページ12に含まれる内容の要旨
ATN-MMC Under blocking area, the external antenna can extend the signal reception from HI-405BT By connecting to different optional PS2-1394 connecting cables, HI-405BT can be a wired PS/II GPS receiver and used with all kinds of mobile devices. 11
ページ13に含まれる内容の要旨
By counecting different optional counecting cables, HI-405 can be all kinds of wired GPS receiver solutions. 12
ページ14に含まれる内容の要旨
4. System Specifications: 4.1 Bluetooth Slipper Specifications: Bluetooth V1.1 Compliances Frequency Range: 2.4 ~ 2.4835 GHz unlicensed ISM band Interface: USB/UART/SPI Receiver Sensetivity: -80 dBm @ 0.1% BER Transmitting Power: Class 2 -6 dBm ~ +4 dBm RF Input Impedance: 50 ohms Frequency hopping: 1600hops/sec. Baseband Crystal OSC: 16MHz Data Rate: Up to 723Kb/s Operating Temperature: -20°C ~ +80°C Storage Temperature: -30°C ~ +90°C Supply Voltage: Build-in Rechargeable Bettery (3.7V 1500m
ページ15に含まれる内容の要旨
4.2 GPS receiver Specifications: Protocol: NMEA0183 GGA, GSA, GSV, RMC, VTG, GLL Baud Rate: 1 Hz Datum: WGS84 Channel: 12 channel all-in-view tracking Frequency: L1, 1575.42MHz Hot Start: 8 sec. Average Warm Start: 38 sec. Average Cold Start: 48 sec. Average Reacquisition Time: 100 ms Position Accuracy: 15m 2D RMS, SA off Maximum Altitude: 18,000m Maximum Velocity: 515m/s Voltage: DC 3.3V+-10% Antenna Type: Built-in active antenna External Antenna MMCX (Optional) Connector: 3D Positioning (bli
ページ16に含まれる内容の要旨
5. Get Connected; Installation Guide 5.1 Laptop PC Installations Run "My Bluetooth Places" and Double Click the "Find Bluetooth Devices " icon Double Click "HAICOM BT GPS" Double Click "SPP on HAICOM BT GPS" 15
ページ17に含まれる内容の要旨
Key in pin code: “0000” Connected 5.2 PDA Installations Double Click the Bluetooth icon 16
ページ18に含まれる内容の要旨
Double click “HAICOM BT GPS” Key in pin code: “0000” Found the host device 17
ページ19に含まれる内容の要旨
For Connected with device Select the correct com port Start GPS, NMEA message inflow More satellites info 18
ページ20に含まれる内容の要旨
6. GPS Technical Data 6.1 ONE-PULSE-PER-SECOND (1PPS) OUTPUT The one-pulse-per-second output is provided for applications requiring precise timing measurements. The output pulse is 1usec in duration. Rising edge of the output pulse is accurate to +/-1usec with respect to the start of each GPS second. Accuracy of the one- pulse-per-second output is maintained only when the GPS receiver has valid position fix. The 1PPS output is always generated when the GPS receiver is powered-on. Proper adj
