ページ1に含まれる内容の要旨
UM10032
ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4
Rev. 04 — 12 October 2009 User manual
Document information
Info Content
Keywords isp1362; pxa250; pxa25; otg; on-the-go; usb; universal serial bus
Abstract This document describes the ISP1362 OTG add-on eval kit for Intel
PXA250/255 IDP rev. 04.
ページ2に含まれる内容の要旨
UM10032 ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 Revision history Rev Date Description 04 20091012 Rebranded to the ST-Ericsson template. 03 20090203 Rebranded to the ST-NXP Wireless template. 02 20030601 Updated Table 1. Added PXA255. 01 20030501 First release. Contact information For additional information, please visit: http://www.stericsson.com For document related queries, please send an email to: wired.support@stericsson.com UM10032_4 © ST-ERICSSON. All
ページ3に含まれる内容の要旨
UM10032 ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 1. Introduction The ISP1362 is a single-chip Universal Serial Bus (USB) On-The-Go (OTG) Controller, Host Controller (HC) and Device Controller (DC). • The OTG controller is fully compliant with On-The-Go Supplement to the USB 2.0 Specification Rev. 1.0a. • The host controller is fully compliant with Universal Serial Bus Specification Rev. 2.0; supporting data transfer at full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s
ページ4に含まれる内容の要旨
UM10032 ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 Fig 2. Top view of the ISP1362 OTG add-on car d for PXA250/255 IDP Fig 3. Side view of the ISP1362 OTG add-on card for PXA250/255 IDP UM10032_4 © ST-ERICSSON. All rights reserved. User manual Rev. 04 — 12 October 2009 4 of 21
ページ5に含まれる内容の要旨
UM10032 ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 Fig 4. Bottom view of the ISP1362 OTG add-on card for PXA250/255 IDP 2. System requirements • Two BSQUARE Linux IDP boards (version 2 or later) with the ISP1362 OTG add-on cards attached. • One OTG cable. • A USB speaker. Fig 5. BSQUARE IDP version 2 UM10032_4 © ST-ERICSSON. All rights reserved. User manual Rev. 04 — 12 October 2009 5 of 21
ページ6に含まれる内容の要旨
UM10032 ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 Fig 6. BSQUARE IDP version 4 3. Installation 1. Copy the nk.bin file to a CompactFlash (CF) memory unit, and firmly insert the ISP1362 OTG add-on card for the PXA250/255 IDP into connector J13 on the BSQUARE IDP board. 2. Insert a PC card adapter with CF into either of the PC card slots in the BSQUARE IDP. 3. Switch ON the BSQUARE IDP, and wait for the CF memory to be reprogrammed. 4. Eject the PC card to reboot th
ページ7に含まれる内容の要旨
UM10032 ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 Fig 7. Setup of the ISP1362 OTG add-on card for PXA250/255 IDP 3.2 Power supply and LED indicators In the ISP1362 OTG add-on evaluation card, the power supply inputs, +3.3 V and +5.0 V, come from the IDP. Therefore, no other external power supply input or on-board power regulation is required. There are LEDs on the board to indicate the power supply status: • D1 is the +3.3 V indicator. • D2 is the +5.0 V indicator.
ページ8に含まれる内容の要旨
UM10032 ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 Jumper Description Setting JP3 ID pin select Open (use ID from connector) [default] Short (force ID to zero) Fig 8. ISP1362 OTG add-on card on the PXA250/255 IDP 4. ISP1362 bill of materials Table 2. Bill of materials Quantity Part reference Description Value Rating Manufacturer 9 C2, C5, C6, C9, C10, C16, Capacitor, SMD MLC, 0.01 μF, ±10% 0.01 μF 50 V Generic C17, C21, C22 50 V NPO/X7R, 0603 12 C7, C8, C13, C1
ページ9に含まれる内容の要旨
UM10032 ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 Quantity Part reference Description Value Rating Manufacturer μF, 16 V, TAJ A-CASE 1 C30 Capacitor SMD, tantalum chip, 100 100 μF 16 V AVX μF, 16 V, TAJ D-CASE 2 C3, C4 Capacitor SMD, tantalum chip, 47 μF, 47 μF 16 V AVX 16 V, TAJ D-CASE 1 U6 ISP1362 USB OTG controller - - ST-Ericsson 2 JP1, JP3 Header – 1 x 2 .025SQ PIN .100 - - Generic centers 1 JP2 Header – 2 x 3 .025SQ PIN .100 - - Generic centers 1 J3 High-
ページ10に含まれる内容の要旨
UM10032 ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 Quantity Part reference Description Value Rating Manufacturer 7 R6, R7, R8, R14, R15, R16, Resistor, SMD, fixed, film, chip, 100 100 K 1/16 W Generic R23 K, ±5%, 1/16 W, 0603 2 R18, R21 Resistor, SMD, fixed, film, chip, 15.0 15 K 1/16 W Generic K, ±5%, 1/16 W, 0603 2 R1, R24 Resistor, SMD, fixed, film, chip, 470 470 1/16 W Generic Ω, ±5%, 1/16 W, 0603 2 R11, R12 Resistor, SMD, fixed, film, chip, 4.70 4.7 K 1/16 W Gene
ページ11に含まれる内容の要旨
UM10032 ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 UM10032_4 © ST-ERICSSON. All rights reserved. User manual Rev. 04 — 12 October 2009 11 of 21 Fig 9. ISP1362 USB On-The-Go Expansion Board For BSQUARE IDP's - block diagram (page 2)
ページ12に含まれる内容の要旨
UM10032 ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 Fig 10. BSQUARE IDP high-speed expansion connector – part 1 (page 3) UM10032_4 © ST-ERICSSON. All rights reserved. User manual Rev. 04 — 12 October 2009 12 of 21
ページ13に含まれる内容の要旨
UM10032 ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 Fig 11. BSQUARE IDP high-speed expansion connector – part 2 (page 3) UM10032_4 © ST-ERICSSON. All rights reserved. User manual Rev. 04 — 12 October 2009 13 of 21
ページ14に含まれる内容の要旨
UM10032 ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 Fig 12. BSQUARE IDP high-speed expansion connector – part 3 (page 3) UM10032_4 © ST-ERICSSON. All rights reserved. User manual Rev. 04 — 12 October 2009 14 of 21
ページ15に含まれる内容の要旨
UM10032 ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 UM10032_4 © ST-ERICSSON. All rights reserved. User manual Rev. 04 — 12 October 2009 15 of 21 Fig 13. ISP1362 USB OTG controller (page 4)
ページ16に含まれる内容の要旨
UM10032 ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 UM10032_4 © ST-ERICSSON. All rights reserved. User manual Rev. 04 — 12 October 2009 16 of 21 For DMA accesses, use the following address ranges. This will generate the DMA Acknowledge signals needed. Processor uses CS2#. PIO Address Map: 0000 0000h to 00FF FFFFh. DMA Channel 0 Address Map: 0200 0000h to 02FF FFFFh. DMA Channel 1 Address Map: 0100 0000h to 01FF FFFFh. Fig 14. USB OTG and host connectors – part 1
ページ17に含まれる内容の要旨
UM10032 ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 UM10032_4 © ST-ERICSSON. All rights reserved. User manual Rev. 04 — 12 October 2009 17 of 21 Fig 15. USB OTG and host connectors – part 2 (page 5)
ページ18に含まれる内容の要旨
UM10032 ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 UM10032_4 © ST-ERICSSON. All rights reserved. User manual Rev. 04 — 12 October 2009 18 of 21 Fig 16. USB OTG and host connectors part 3 (page 5)
ページ19に含まれる内容の要旨
UM10032 ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 6. References [1] ISP1362 Single-chip USB On-The-Go controller data sheet [2] ISP1362 Linux Stack user manual [3] Universal Serial Bus Specification Rev. 2.0 [4] On-The-Go Supplement to the USB 2.0 Specification Rev. 1.0a [5] Intel PXA250 Applications Processor Integrated Development Platform User’s Guide from BSQUARE (linux_user_guide_EUG-0004-0001B.pdf) UM10032_4 © ST-ERICSSON. All rights reserved. User manual
ページ20に含まれる内容の要旨
UM10032 ISP1362 OTG add-on eval kit with Intel PXA250/255 IDP rev. 4 7. Legal information Please Read Carefully: The contents of this document are subject to change without prior notice. ST-Ericsson makes no representation or warranty of any nature whatsoever (neither expressed nor implied) with respect to the matters addressed in this document, including but not limited to warranties of merchantability or fitness for a particular purpose, interpretability or interoperability or, again
