ページ1に含まれる内容の要旨
45138
Wireless Alarm System
Signal Repeater
User’s Manual
Test
Choice
Choice
ALERT
ALERT™
™
Control all Sensors
& accessories from
one location
ページ2に含まれる内容の要旨
Table of Contents Important Safeguards 4 Introduction 5 Installation 6 Adding a Signal Repeater to the system 6 Testing the Signal Repeater or your system 6 Low battery indicator 7 Battery warnings 7 FCC Warning 8
ページ3に含まれる内容の要旨
Before connecting or operating the SIgnal Repeater, please read these instructions carefully and save this manual for future reference. Congratulations ™ The GE Choice Alert Wireless Alarm System is one of the most affordable and expandable wireless alarm systems available. You’ll discover the system offers many features typically found in custom installed Alarm systems. The Choice Alert system is reliable and easy-to-use. With Choice Alert you can select from a line of Sensors and Ac
ページ4に含まれる内容の要旨
Important safeguards PreCautions 1. Do not attempt to disassemble the Signal Repeater, unless described in the user’s manual. There are no user serviceable parts. . Handle with Care – Avoid striking or shaking. Improper use or storage could damage the Signal Repeater. Modifying or tampering the device or its internal components can cause a malfunction and void the Signal Reapeater’s warranty. . If you feel the Signal Repeater or any part of the Choice Alert system is not operating cor
ページ5に含まれる内容の要旨
Introduction The Signal Repeater will extend the range of the Choice Alert system up to 150 feet from its location – Effectively repeating the signal from any Sensor back to the Control Center should a Sensor be located out of range. The Signal Repeater does not send or receive signals to the Silent Alert or Alarm Siren, or from other Signal Repeaters. Check List Identify all the parts before proceeding. Signal Repeater 4 5
ページ6に含まれる内容の要旨
Adding a Signal Repeater Step 1 - Find an electric outlet near the Sensor having trouble communicating with the Control Center. Make certain the location is between the Sensor and Control Center. Plug the Signal Repeater into the outlet and press the ‘Test’ Test button on the side of Signal Repeater. It will send a test signal out to the Control Center and the LED indicator on the Signal Repeater will flash rapidly for about one second, then go out. Step 2
ページ7に含まれる内容の要旨
Step 3 - When the Signal Repeater receives the confirmation signal, the LED indicator will flash, five times. If the Signal Repeater does not receive the confirmation signal from the Control Center, the LED indicator on the Signal Repeater will not flash. You will need to move the Signal Repeater closer to the Control Center and retest. Step 4 - To Ensure the Signal Repeater can receive the signal from the Sensor, activate the Sensor. The Signal Repeater’s LED indicat
ページ8に含まれる内容の要旨
FCC Warning Any unauthorized changes or modifications to the equipment would void the user’s warranty and may conflict with both state and federal laws. The Choice Alert system complies with part 15 of the FCC rules. Operation is subject to the following conditions: 1) The Choice Alert system may not cause harmful interference. ) The Choice Alert system may accept any interference received including interference that may cause undesired operation. NOTE: This equipment has been tested
ページ9に含まれる内容の要旨
WARNING Limitations of Alarm Products This product should be tested periodically to make sure it is working properly. The product, if used properly, may reduce the risk of burglary, robbery, or other adverse events. However, JASCO is not an insurer, this product is neither insurance nor a guarantee that such an event will be prevented, and users should protect themselves with proper insurance. JASCO makes no representation that this product cannot be compromised or circumvented, that it w
ページ10に含まれる内容の要旨
10 11
ページ11に含まれる内容の要旨
10 11
ページ12に含まれる内容の要旨
is a trademark of the General Electric Company and is used under license to Jasco Products Company LLC, 10 E. Memorial Road, Oklahoma City, OK 73114. This Jasco product comes with a 45138-1 1 year limited warranty. Visit 01/09/08 www.jascoproducts.com for details.
