ページ1に含まれる内容の要旨
Home Theater In A Box | Système de cinéma maison | Sistema de Teatro en Casa
NS-H3005
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Safety information Insignia NS-H3005 Electric shock warning Home Theater CAUTION Risk of Electric Shock Do Not Open System Warning To reduce the risk of electric shock, do not remove the cover or back. There are no user-serviceable parts inside. Refer Contents servicing to qualified service personnel. This lightning flash with arrowhead symbol within Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 an equilateral triangle is intended to alert the user Safety inform
ページ4に含まれる内容の要旨
Insignia NS-H3005 Home Theater System Do not defeat the safety purpose of the Power cord polarized or grounding-type plug. A polarized plug has two blades with one wider than the Caution other. A grounding type plug has two blades We recommend that most appliances be placed upon a and a third grounding prong. The wide blade dedicated circuit—a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. or the third prong are provided for you
ページ5に含まれる内容の要旨
Insignia NS-H3005 Home Theater System Display window Component Description 1 2 Remote sensor and display Point the remote control here. 2 window For more information about the display window, see 3 “Display window” on page 3. 4 3 Open/Close Opens or closes the disc tray. 5 4 Tape compartment (VCR) Insert a video tape here. 6 7 5 REC/ITR Press to record or to activate 8 Instant Timer Recording. 9 6 Reverse SKIP/SCAN / DVD: Press to go to the 10 beginning of the current 11 chapter or track o
ページ6に含まれる内容の要旨
Insignia NS-H3005 Home Theater System Back panel Remote control 1 2 1 13 3 2 14 4 5 6 3 15 4 16 7 5 17 8 9 18 6 Component Description 19 7 1 AC power cord Plug into an electrical outlet. 2 VCR in line 1 (Video Connect the audio/video output of an in/Audio in external source such as an audio 20 8 (left/right)) system, television or monitor, or VCR to these jacks. 3 DVD/VCR out video Connect to a television that has audio out/audio out and video inputs. 9 21 (left/right)) 4 Component/ Connect
ページ7に含まれる内容の要旨
Insignia NS-H3005 Home Theater System Component Description Component Description 7 Press to navigate through the on-screen 25 Title Press to access the DVD’s Title menu. Left /Right / menu. Also use to change channels on Up /Down the VCR or stations on the radio. Note 8 Return Press to return from the Setup menu. This remote control uses the same buttons for both the VCR and the DVD player. To control the VCR, press the VCR button. 9 REC/ITR Press to record a tape or activate Instant To con
ページ8に含まれる内容の要旨
Insignia NS-H3005 Home Theater System Make sure that you refer to the instructions Pro Logic (II) ( ) supplied with the DVDs. Some DVDs made for Dolby Pro Logic II creates five full-bandwidth business purposes may not play on the player. output channels from two-channel sources. This Regional codes is done using an advanced, high-purity matrix This DVD player is designed and surround decoder that extracts the spatial manufactured for playback of Region 1 properties of the original record
ページ9に含まれる内容の要旨
Insignia NS-H3005 Home Theater System CD playback Antenna Antenna Each time you press SOUND, the audio CD Cable TV sound mode is changed in the following order: wall jack Flat Wire Bypass (300 ohm) PRO Logic 300/75 Music ohm adapter Matrix (not 3D Surround supplied) Note The player memorizes the last mode setting for each source individually. You can identify the encoding format of program software by looking at its packaging. Dolby Digital discs are labeled with the logo . D
ページ10に含まれる内容の要旨
Insignia NS-H3005 Home Theater System To set the home theater system’s RF output Back panel of typical Cable TV cable box wall jack channel: 1 While the home theater system is turned off, press and hold CH/PRESET (-/+) on the front panel for about five seconds. The home theater system turns itself on and RF-03 or RF-04 appears in the display window. 2 Press CH/PRESET (-/+) on the front panel to change the RF output channel (CH 03 or CH 04). 3 Turn the home theater system off, then turn
ページ11に含まれる内容の要旨
Insignia NS-H3005 Home Theater System To connect the DVD player to the television To connect the DVD player to the television using component video: using progressive scan: 1 Connect the COMPONENT/PROGRESSIVE 1 Connect the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks on the home SCAN VIDEO OUT jacks on the home theater system to the corresponding in jacks theater system to the corresponding in jacks on the television using Y, Pb, and Pr cables on the television using Y, Pb, and Pr cable (C).
ページ12に含まれる内容の要旨
Insignia NS-H3005 Home Theater System Connecting devices to your home theater Note system To prevent noise pickup, keep the AM loop antenna away from the home theater system and other devices. To connect devices to your home theater Be sure to fully extend the FM wire antenna. system: After connecting the FM wire antenna, keep it as close to horizontal as possible. Connect the LINE 1 or LINE 2 jacks on the home theater system to the AUDIO/VIDEO Connecting speakers to your home thea
ページ13に含まれる内容の要旨
Insignia NS-H3005 Home Theater System 3 Close the ferrite core. You should hear a Setting up the VCR click. Using the On-Screen Display (OSD) Some of these functions appear during VCR Connect the ferrite core as operation. close as possible 4 5 1 2 6 Note Attach the ferrite core as close to the home theater system as possible. 3 7 Locating the speakers For a normal setup, use six speakers (two front Display Description speakers, one center speaker, two rear speakers and a subwoofer). 1 F
ページ14に含まれる内容の要旨
Insignia NS-H3005 Home Theater System PROGRAM DETAILS 5 Press MENU when finished making adjustments. Setting Description Function OSD Turn on or turn off the on-screen display. Select ON and OFF with or . Audio mode The VCR has two separate audio playback Easy Information Screen Easy Information Screen systems, the high quality VHS Hi-Fi system and (Station ID) (Program details) standard NORMAL mono system. The same audio is generally recorded on both systems. The VHS Hi-Fi system plays on
ページ15に含まれる内容の要旨
Insignia NS-H3005 Home Theater System 3 Press to choose SOURCE SELECT, then Auto Clock Set use or to select TUNER. Press or The Auto Clock Set feature is set to ON at the repeatedly to switch among TUNER, LINE1 factory. In the ON setting, the home theater or LINE2. system looks for a channel carrying XDS (Extended Data Services) information. XDS 4 Press or to choose AUTO CHANNEL updates the clock using the Coordinated SET, then use or to search for Universal Time. channels. The tuner a
ページ16に含まれる内容の要旨
Insignia NS-H3005 Home Theater System 3 Press MEMORY/ENTER. The Clock menu 3 Press or to change the setting of an appears. item. The number buttons can also be used for entering numbers. 4 For some functions, press MEMORY/ENTER to modify the setting. Temporary Feedback Field Icons Icon Description Repeat title TITLE 4 Press or to choose the month. Repeat chapter 5 Press to choose DAY. CHAPT 6 Press or to choose the date. The day of the week displays automatically. Repeat track (non-PCB vide
ページ17に含まれる内容の要旨
Insignia NS-H3005 Home Theater System Language menu Selection Items Function Method Menu Description Audio language Shows the /, or 1 ENG Disc language Select a language for the DVD’s menu, and digital audio current audio AUDIO D Audio, and Subtitle. output mode soundtrack 5.1 CH language, Original: The original language set for the encoding DVD is selected. method, and Other: To select another language, press channel number buttons to enter the number, and corresponding 4-dig
ページ18に含まれる内容の要旨
Insignia NS-H3005 Home Theater System 5 Select the first character of the country code Menu Description using the or buttons. For more information, see “Country code list” on Country Code Enter the code of a country/area whose standards were used to rate the DVD. For page 33 more information, see “Country code 6 Press to move to the next character. list” on page 33. 7 Select the second character of the country Disc Audio Code Set code using the or buttons. Disc Subtitle U S C A Disc Menu
ページ19に含まれる内容の要旨
Insignia NS-H3005 Home Theater System Picture menu 2 Press STOP and hold it for five seconds before releasing it. The video output is restored to the standard setting and a picture Menu Description is once again visible on a conventional TV aspect 4:3 Letterbox: Select when a standard 4:3 analog television or monitor. television is connected. Displays theatrical Speaker Setup movies with masking bars above and below the picture. You can use the Speaker Setup menu to select 4:3 Panscan: S
ページ20に含まれる内容の要旨
Insignia NS-H3005 Home Theater System Others setup If you want to view the VCR output, press VCR on the remote or on the front panel of the home Disc Audio DRC On theater system until the VCR indicator lights in Disc Subtitle Vocal On the display window and the VCR output appears Disc Menu On PBC on the television screen. Rating Auto Play Off Country Code TV Aspect Note Menu Language If you insert a DVD while the home theater system is in the Progressive S can VCR mode, the home theater s
