ページ1に含まれる内容の要旨
HT-H4500
5.1CH Blu-ray™
Home Entertainment System
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
This Nanum Gothic Eco font is provided by NAVER.
ページ2に含まれる内容の要旨
Safety Information This symbol indicates that high voltage CAUTION is present inside. It is dangerous to make any kind of contact with any RISK OF ELECTRIC SHOCK DO NOT OPEN internal part of this product. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO This symbol indicates that important NOT REMOVE THE COVER (OR BACK). THERE ARE NO literature concerning operation and USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO maintenance has been included with QUALIFIED PERSONNEL. this pro
ページ3に含まれる内容の要旨
Safety Information ● ● Do not allow children to hang on the product. Connect this equipment to an outlet on a circuit that the receiver is not connected to. ● Store the accessories (battery, etc.) in a location safely out of the reach of children. ● Consult the dealer or an experienced radio/TV technician for help. ● Do not install the product in an unstable location such as a shaky self, a slanted floor, or a location exposed This class B digital product meets all requirements of the Ca
ページ4に含まれる内容の要旨
Safety Information ● 8. Do not install near any heat sources such as Do not use the 3D Active Glasses for other purposes radiators, heat registers, stoves, or other apparatus (such as general eyeglasses, sunglasses, protective (including AV receivers) that produce heat. goggles, etc.) ● Do not use the 3D function or 3D Active Glasses while 9. Do not defeat the safety purpose of the polarized walking or moving around. Using the 3D function or or grounding-type plug. A polarized plug has two
ページ5に含まれる内容の要旨
Contents Contents GETTING STARTEd NETWORk SERvICES 6 Accessories 29 Using BD-LIVE™ 6 Speaker Components 29 Using DLNA 7 Front Panel 29 Apps 7 Rear Panel 30 Using Opera TV Store 8 Remote Control AppENdIx CONNECTIONS 31 Additional Information 9 Connecting the Speakers 32 Disk and Format Compatibility 10 Connecting to a Network Router 37 Troubleshooting 11 Connecting to a TV and External Devices 40 Specifications 41 Licenses SETTINGS 12 The Initial Settings Procedure 13 The Home Screen at a Glance
ページ6に含まれる内容の要旨
Getting Started Check the box for the accessories and speaker components listed or shown below. Accessories ● Remote Control (AH59-02533A) ● User Manual (AH68-02672A) ● Batteries (AAA size) (4301-000116) power Cable (3903-000598) FM Antenna (AH42-00021A) Speaker Components Center Front x 2 Surround x 2 Speaker Cable x 6 Subwoofer 6 - English
ページ7に含まれる内容の要旨
Getting Started 5V 0.5A MIC 1 MIC 2 5V 0.5A MIC 1 MIC 2 5V 0.5A MIC 1 MIC 2 5V 0.5A MIC 1 MIC 2 5V 0.5A MIC 1 MIC 2 5V 0.5A MIC 1 MIC 2 Front Panel dISpLAy ICONS FUNCTION STOp pLAy/pAUSE vOLUME OpEN/CLOSE pOWER CONTROL 5V 0.5A MIC 1 MIC 2 dISpLAy 5V 0.5A dISC TRAy REMOTE CONTROL SENSOR USB When the product is on, do not let children touch the product's surface. It will be hot. ✎ To upgrade the product's software through the USB jack, you must use a USB flash drive. ✎ When the product displays
ページ8に含まれる内容の要旨
Getting Started Remote Control Tour of the Remote Control Press to select Home Theater's Turn the product on and off. mode. (BD/DVD, D. IN, AUX, FUNCTION etc.). To open and close the disc tray. VOLUME MUTE Adjust the volume. - + Cut off the sound temporarily. 1 2 3 Press numeric buttons to operate options. 4 5 6 7 8 9 DISC MENU TITLE MENU Use to enter the Popup Press to view the disc menu. POPUP 0 menu/Title menu. Press to skip backwards or forwards. Press to search backwards or Press to pl
ページ9に含まれる内容の要旨
Connections Connections This section describes various methods of connecting the product to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord. Connecting the Speakers position of the product Place it on a stand or cabinet shelf, or under the TV stand. Front (R) Center Selecting the Listening position Subwoofer The listening position should be located about 2.5 to 3 times the TV's Surround (R) screen size away from
ページ10に含まれる内容の要旨
Connections Speaker Cable Connections 1. Match each speaker cable bundle to the correct speaker by matching the color coded plug on each bundle to the colored sticker on the bottom or back of each speaker. 2. Connect the speaker wire plugs from each speaker to the back of the product by matching the colors of the speaker plugs to the colors of the speaker jacks. Front Speaker (L) Surround Speaker (L) Center Speaker SURROUND Surround Speaker (R) SURROUND Subwoofer Front Speaker (R) SURROUND SUR
ページ11に含まれる内容の要旨
Connections Connecting to a TV and External Devices SURROUND L SURROUND R Red R White W Method 1 Method 2 External devices AUDIO OUT OPTICAL OUT HDMI IN Connecting to a Tv Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV. If the TV supports ARC, you can hear the audio from your TV through the home theater with only this cable connected. See page 15 in this manual and the section on ARC in your TV's user's manual for details.
ページ12に含まれる内容の要旨
Settings 4:3 pan-Scan - For older, standard screen, The Initial Settings Procedure analog TVs. Displays 4:3 pictures in full screen and 16:9 pictures in Pan-Scan format that fills ● The Home menu will not appear if you do not the screen, but cuts off the left and right sides configure the initial settings. of the picture and enlarges the middle vertically. ● The OSD (On Screen Display) may change in 5. The Network - Wired screen appears. this product after you upgrade the software - If y
ページ13に含まれる内容の要旨
Settings If you want to display the Initial Settings screen ✎ More 5 again and make changes, select the Reset option. (See page 16) A list of useful and popular apps we recommend. If you use an HDMI cable to connect the ✎ 6 Change device product to an Anynet+ (HDMI-CEC)-compliant Samsung TV and 1.) You have set the Anynet+ Displays a list of external devices connected to the (HdMI-CEC) feature to On in both the TV main unit. Switch to the desired device. and the product and 2.) You ha
ページ14に含まれる内容の要旨
FUNCTION VOLUME MUTE - + 1 2 3 4 5 6 7 8 9 Settings DISC MENU TITLE MENU POPUP 0 Buttons on the Remote Control Used for Settings Menu Functions the Settings Menu SUBTITLE HOME REPEAT display 3d Settings 1 TOOLS INFO Set up the 3D related functions. 3d Blu-ray playback Mode: Select whether to play 3 a Blu-ray Disc with 3D contents in 3D Mode. If RETURN EXIT you move to the Home menu while in 3D mode, 2 4 the product will switch to 2D automatically. TUNER MEMORY MO/ST Screen Size: Enter the
ページ15に含まれる内容の要旨
Settings HdMI deep Color dynamic Range Control Lets you set the product to output video from Lets you apply dynamic range control to Dolby the HDMI OUT jack with Deep Color. Deep Color Digital, Dolby Digital Plus, and Dolby TrueHD audio. provides more accurate color reproduction with Auto: Automatically controls the dynamic range greater color depth. of Dolby TrueHD audio, based on information in the Dolby TrueHD soundtrack. Also turns progressive Mode dynamic range control off for Dolby
ページ16に含まれる内容の要旨
Settings Change pIN System Changes the 4-digit PIN used to access security Initial Settings functions. Lets you re-run the Initial Settings procedure. (See page 12) General Quick Start Time Zone You can turn on the power quickly by decreasing Lets you specify the time zone that is applicable to the boot time. your area. If this function is set to On, Standby power ✎ consumption will be increased. (About 12W Support ~ 20W) Software Upgrade Anynet+ (HdMI-CEC) For more information about th
ページ17に含まれる内容の要旨
Settings ● Before you begin, confirm that the product is Settings connected to your router with a network cable. Wired Network Settings Display Audio Internet Protocol Setup : Manual Ğ Automatic Network 0 0 0 0 IP Address : To start the configuration process, follow these steps: System Subnet Mask : 255 255 255 0 1. In the Home menu, select Settings, and then Gateway : 0 0 0 0 Language press the button. v Security DNS : Manual 2. Select Network, and then press the button. v General DNS Serve
ページ18に含まれる内容の要旨
Settings By USB Upgrading Software 1. Visit www.samsung.com. The Software Upgrade menu allows you to 2. Click SUppORT on the top right of the page. upgrade the product’s software for performance improvements or additional services. 3. Enter the product's model number into the search field. As you enter the model number, a ● Never turn the product off or back on manually drop down will display products that match the during the update process. model number. ● The update is complete when the
ページ19に含まれる内容の要旨
Settings 9. Find the DLNA install file on your disk, and then Auto Upgrade Notification double click the file. If your product is connected to the network and you 10. In the pop-up that appears, click Run, and set Auto Upgrade Notification on, the product will then follow the directions that appear on your notify you if a new software version is available with screen. a pop-up message. 1. Turn on the product. Download the DLNA Installation/Instruction manual from the same Software Tab by
ページ20に含まれる内容の要旨
Playing Content Your home theater can play content located on 3. Press the button to close the disc tray. ^ Blu-ray/DVD/CD discs, USB devices, PCs, smart Playback starts automatically. phones, tablets, and in Apps. 4. If playback does not start automatically, press To play content located on your PC or a mobile the button on the remote. 6 device, you must connect the PC or mobile device and the product to your network. To play content on disc Storage & Management your PC, you must also
