ページ1に含まれる内容の要旨
User Manual
Racks and Accessories
NetShelter SV
AR2200, AR2201, AR2280, AR2400, AR2400FP1,
AR2401, AR2407, AR2480, AR2487, AR2500,
AR2501, AR2507, AR2580, AR2587
990-4823A-001
Publication Date: 2013
ページ2に含まれる内容の要旨
This manual is available in English on the APC Web site (www.apc.com). Dieses Handbuch ist in Deutsch auf der APC Webseite (www.apc.com) verfügbar. Este manual está disponible en español en la página web de APC (www.apc.com). Ce manuel est disponible en français sur le site internet d’APC (www.apc.com). Questo manuale è disponibile in italiano sul sito web di APC (www.apc.com). APC (www.apc.com) Instrukcja obslugi w jezyku polskim jest dostepna na stronie internetowej APC (www.apc.com). Дан
ページ3に含まれる内容の要旨
Disclaimer The information presented in this manual is not warranted by Schneider Electric to be authoritative, error free, or complete. This publication is not meant to be a substitute for a detailed operational and site specific development plan. Therefore, Schneider Electric assumes no liability for damages, violations of codes, improper installation, or any other problems that could arise based on the use of this publication. The information contained in this publication is provided as is
ページ4に含まれる内容の要旨
ページ5に含まれる内容の要旨
Contents Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Please Note: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General Information........................................................ 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ6に含まれる内容の要旨
Customize the Cabinet.................................................. 10 Reverse the Front Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Side Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Remove and install side panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Rear Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Removal. . . . . . . . . . . .
ページ7に含まれる内容の要旨
General Information Introduction ® The NetShelter SVcabinet is for storage of industry-standard (EIA/ECA-310), 19-inch rack-mount hardware, which includes servers and voice, data, networking, internetworking, and Schneider Electric power protection equipment. This manual provides installation and customization instructions for the following: • NetShelter SV 42 U, 600 mm (23.6 in.) wide, 1000 mm (39.4 in.) deep cabinet (AR2200) • NetShelter SV 42 U, 600 mm (23.6 in.) wide, 1000 mm (39.4 in.) d
ページ8に含まれる内容の要旨
Safety Important Safety Information Read the instructions carefully to become familiar with the equipment before trying to assemble, operate, service or maintain it. The following special messages may appear throughout this manual or on the equipment to warn of potential hazards or to call attention to information that clarifies or simplifies a procedure. The addition of this symbol to a Danger or Warning safety label indicates that an electrical hazard exists which will result in personal i
ページ9に含まれる内容の要旨
Overview Introduction Tools Safety and handling Receiving and Unpacking NOTICE Schneider Electric is not responsible for damage sustained during shipment of this product. Inspection Upon receipt, inspect the package and contents for damage. Verify the contents are complete. Report missing contents, damage, or other problems immediately to Schneider Electric or your Schneider Electric reseller. Keep all packaging for inspection if damage is found. Please Recycle The shipping materials are
ページ10に含まれる内容の要旨
Unpacking WARNING TIP HAZARD This cabinet is easily tipped. Use extreme caution when unpacking or moving. • Use at least two people to unpack and move the cabinet. • Before moving the cabinet on its casters, load 158 kg (350 lbs) of equipment into the bottom of the cabinet for extra stability. • When moving on its casters, make sure the leveling feet are up and push the cabinet from the front or rear. Failure to follow these instructions can result in death, serious injury, or equipment dama
ページ11に含まれる内容の要旨
Component Identification Item Description Qty Item Description Qty Roof 1 Leveling Feet 4 Rear Frame 1 Casters 4 Grounding wire 3 Front Frame 1 Rear Split Doors 2 Vertical Mounting Flanges 4 Side Panels 2 Door and Side Panel Keys 2 Horizontal Side Braces 6 Door Handles 2 Accessory Mounting Brackets 4 Front Door 1 Base 1 Roof/Base Access Panels 2 NetShelter SV User Manual 5 ns2118a
ページ12に含まれる内容の要旨
Equipment Installation Hardware Plastic cup M6 x 16 Phillips Cage nuts (30) Joining Brackets for M5 x 12 screws (4) washers (30) head screws (30) 24 in. centers (4) for joining cabinets Tools (provided) Torx® T30/#2 Phillips wrench Cage nut tool Tools (not provided) Torque wrench Open end wrench 6 NetShelter SV User Manual
ページ13に含まれる内容の要旨
Cabinet Installation Moving the Cabinet WARNING TIP HAZARD This cabinet is easily tipped. Use extreme caution when unpacking or moving. • Use at least two people to unpack and move the cabinet. • Before moving the cabinet on its casters, load 158 kg (350 lb) of equipment into the bottom equipment mounting space of the cabinet for extra stability. • When moving on its casters, make sure the leveling feet are up and push the cabinet from the front or rear. Failure to follow these instructions ca
ページ14に含まれる内容の要旨
Joining Cabinets Cabinets can be joined with or without side panels installed to provide for alignment and some stability. The cabinets are shipped with pre-installed joining brackets for 600 mm centers. To join on 24 in. centers, the cabinet is provided with 24 in. joining brackets in the hardware bag. WARNING TIP HAZARD Joining cabinets provides limited stability. Ensure the cabinet is secured to the floor before installing equipment. Failure to follow these instructions can result in serio
ページ15に含まれる内容の要旨
Secure the Cabinet NOTICE Bolt-down brackets secure the cabinet to the pallet during shipment. Remove them from the cabinet and pallet and save them to secure the cabinet to the floor during installation. WARNING TIP HAZARD Secure the cabinet to the floor before installing equipment. Failure to follow these instructions can result in serious injury or equipment damage. To secure the cabinet to the floor, use fastener locations on the outside or inside of the cabinet and the bolt-down bracket
ページ16に含まれる内容の要旨
Customize the Cabinet Reverse the Front Door You can reverse the front door so that the door is hinged on the opposite side. 1. Remove the handle using the Torx T30/#2 Phillips wrench (provided). 2. Unfasten the ground wire from the cabinet and door, then remove the door. 3. Rotate and reinstall the door to the opposite side. Remove any plastic hole plugs and reinstall the ground wire to the door and cabinet. 10 NetShelter SV User Manual ns2008a ns2007a ns2006a
ページ17に含まれる内容の要旨
4. Remove and reinstall the latch and washer oriented as shown using a Torx T30/#2 Phillips wrench. The washer is rotated 90 degrees from its original orientation, and the latch is rotated 180 degrees. 5. Reinstall the handle to the door. Torque the screws to 28 - 30 in-lb (3.2 - 3.4 N-m). NetShelter SV User Manual 11 ns1766b ns2009a
ページ18に含まれる内容の要旨
Side Panels Remove and install side panels Rear Doors Removal 1. Disconnect the grounding wires attached to the rear doors at the connector. x 2 2. Remove the left and right rear doors by pulling the top hinge pin down to release the pin from the hole securing it to the frame. x 2 3. Lift the door to remove the bottom hinge pin from the hole in the cabinet base. 12 NetShelter SV User Manual ns2060a ns2087a ns2065b
ページ19に含まれる内容の要旨
Installation 1. Install the left and right rear doors by aligning the bottom hinge pin to the hole in the cabinet base. x 2 2. Pull the top hinge pin down, align with the hole in the roof, then release. 3. Connect the grounding wires. x 2 NetShelter SV User Manual 13 ns2064a ns2065b
ページ20に含まれる内容の要旨
Equipment Installation NOTICE NetShelter SV cabinets are intended for use with Listed equipment. If you install un-Listed equipment, you should evaluate the safety of your configuration. Adjust Vertical Mounting Flanges Vertical mounting flanges come factory-installed in the proper location for use with rack-mountable equipment. The mounting flanges are adjustable towards the front or the rear of the cabinet to fit different rails or equipment with other depths to accommodate a wide variety
