Alvin Heritage HWE150の取扱説明書

ページ1に含まれる内容の要旨

™
Heritage H-Frame Easel
Assembly Instructions For HWE150
Parts List:
Top bracket
Main Easel Frame
Canvas Support Assembly
To Assemble
Figure 2
Unwrap and lay out all parts.
1
Some hardware may have loosened during transportation.
2
For best results, we suggest that you tighten the four Allen
bolts in sides of main easel frame, as shown in Figure 1,
and tighten the two Phillips screws in the back of canvas
support assembly, as shown in Figure 2.
Figure 1

ページ2に含まれる内容の要旨

Angle Adjustment Knobs Brass Thumbscrew Brass Thumbscrew Angle Adjustment Knobs Figure 3 Height Adjustment Ring Figure 4 Lay main easel frame flat on floor with brass height 3 adjustment track facing up. Carefully slide canvas support assembly from below into 4 slots and tracks in main frame, as shown in Figure 3. To Adjust Height Pull spring-loaded height-adjustment ring and set in the third track position for the time being. Loosen brass thumbscrew on back of main vertical track. 1 Loo