ページ1に含まれる内容の要旨
Model C1060 Headset Intercom System Replacement Parts and Service
Replacement Parts List
Ordering Replacement Parts
Technical Service
The following pages show replacement parts for
the model C1060 Headset Intercom. For technical assistance, call:
Order parts by the model number, part number, 1-800-328-0033
part name and quantity required.
Write to:
Replacement parts and their prices are available by 3M Commercial Care Division
calling: Food Service Business
3M Center
ページ2に含まれる内容の要旨
Model C1060 Headset Intercom System Replacement Parts and Service Replacement Parts List (continued) Section 1 – Base Station Assembly, Interconnect Module, and Programming Station ©3M 2005 November 2
ページ3に含まれる内容の要旨
Model C1060 Headset Intercom System Replacement Parts and Service Item No. Part Number Description Qty. 0 .......................78-9236-6826-9 ............BASE STATION ASSEMBLY, Model C922 (w/o Power Supply)...1 1 .......................78-8095-0500-7 ............CABINET, Base Station.....................................................................1 1A.....................78-8095-0965-2 ............HINGE, Assembly, (Replacement) ....................................................1
ページ4に含まれる内容の要旨
Model C1060 Headset Intercom System Replacement Parts and Service Replacement Parts List (continued) Section 2 – Headset Assembly 11 9 10 7 13 12 19 6 8 4 1 17 16 2 15 3 5 14B 18 20 14C 14A 14 14D ©3M 2005 November 4
ページ5に含まれる内容の要旨
Model C1060 Headset Intercom System Replacement Parts and Service Item No. Part Number Description Qty. 0 .......................78-6911-4723-1 ............Headset Model C1060 .............................................................1 1 .......................78-6911-4727-2 ............Headband Pad, for Model C1060 (pkg of 10)..........................1 2 .......................78-6911-4728-0 ............Ear Pad, for Model C1060 (pkg of 10) ....................................1 3
ページ6に含まれる内容の要旨
Model C1060 Headset Intercom System Replacement Parts and Service Replacement Parts List (continued) Section 3 – 3-Slot Battery Charger Assembly 2 1 Item No. Part Number Description Qty. 1 .......................78-6911-4724-9 ............BATTERY CHARGER, 3-Slot,.for Model C1060 ............................1 2 .......................78-8028-9283-2 ............POWER SUPPLY, 14 VAC (battery charger) ...................................1 ©3M 2005 November 6
ページ7に含まれる内容の要旨
Model C1060 Headset Intercom System Replacement Parts and Service Section 4 – 6-Slot Battery Charger Assembly 2 1 Item No. Part Number Description Qty. 1 .......................78-6911-4725-6 ............BATTERY CHARGER, 6-Slot, for Model C1060 ............................1 2 .......................78-8028-9283-2 ............POWER SUPPLY, 14 VAC, (Battery Charger).................................1 ©3M 2005 November 7
ページ8に含まれる内容の要旨
Model C1060 Headset Intercom System Replacement Parts and Service Service Procedures Replacing the Ear Cup, the Ear Pad, or the Headband Pad Headband Pad Replacement: Tools Required: 1. Peel the Headband Pad away from the Battery None Holder Cover. Clean off any adhesive residue. Procedures: 2. Remove the protective backing from a new Headband Pad, align and press into place. Ear Cup and Ear Pad Replacement: 1. Twist and pull the Ear Cup and Ear Pad toget
ページ9に含まれる内容の要旨
Model C1060 Headset Intercom System Replacement Parts and Service Service Procedures (continued) Replacing Inner Case Assembly or Removing Outer Case: Outer Case Assembly 1. Disconnect the power connector located at the Tools Required: top of the Main PWA. 1 - Small size Phillips Screwdriver 2. Carefully pull the power wires out of the top groove of the Headband Clip as shown in 1 – External retaining ring pliers illustration. Procedure: 3. Remove the Headband Clip fro
ページ10に含まれる内容の要旨
Model C1060 Headset Intercom System Replacement Parts and Service Service Procedures (continued) Mic Boom Assembly: 2. Remove the Spring Washer, Nylon Washer, and Mic Boom. 1. Locate and remove the retaining ring using the retaining ring pliers. 3. Reinstall the Mic Boom by performing steps 1 – 3 in reverse order. Caution Caution Make sure you set the retaining ring tool adjustment screw to limit how far the retaining ring is expanded. Care must be taken when reinstalli
ページ11に含まれる内容の要旨
Model C1060 Headset Intercom System Replacement Parts and Service Service Procedures (continued) Reassembly procedure 12. Reinstall the battery, power up and checkout 1. Replace Mic Boom assembly as described. operation of the headset, including Headband (see previous section Mic Boom Assembly:) slide. 2. Install Main PWA and antenna in Outer Case. 13. Replace three case screws, Ear Cup and Ear Pad on Inner Case. 3. Connect Mic Boom cable to bottom connector on PWA. 4.
ページ12に含まれる内容の要旨
Model C1060 Headset Intercom System Replacement Parts and Service Service Procedures (continued) Replacing the Headband Assembly 13. Plug the power cable into the connector located at the top of the PWA. Route the Tools Required: power cable between the On-Off Button and the large capacitor on the PWA. The power 1 - Small size Phillips Screwdriver cable MUST route down the center of the PWA or the Headband will not extend 1 – Soldering iron properly. 14. Plug the speaker
ページ13に含まれる内容の要旨
Model C1060 Headset Intercom System Replacement Parts and Service Service Procedures (continued) Replacing Battery Holder Parts 5. Press the Battery Latch Spring onto the top Tools Required: peg of the Battery Latch. Insert the Latch with Spring down through the top of the Base as 1 – Number 0 Phillips Screwdriver shown. The beveled bottom edge of the Latch MUST face the battery. 1 – Soldering iron. 6. Press the top of the Spring into the small molded ribs located insid
ページ14に含まれる内容の要旨
Model C1060 Headset Intercom System Replacement Parts and Service Service Procedures (continued) Checking out Headset Operation Tools Required: Functioning Wireless Intercom System with at least one additional model C1060 Headset. Procedure: NOTE Check headset operation before replacing the case screws. It is a good idea to simply snap the case together without the screws until the headset is completely checked out. 1. Make sure a fully charged battery is installed in
