ページ1に含まれる内容の要旨
3015_3000txt.book Page 1 Wednesday, August 4, 1999 11:13 AM
Avanti 3015 set
Avanti 3000 set
User guide
79-650-0010/A Issue 1
ページ2に含まれる内容の要旨
3015_3000txt.book Page 2 Wednesday, August 4, 1999 11:13 AM 79-650-0010/A, Issue 1 Printed in Israel
ページ3に含まれる内容の要旨
3015_3000txt.book Page 3 Wednesday, August 4, 1999 11:13 AM 79-650-0010/A, Issue1 Avanti 3015 set Avanti 3000 set User guide Telrad Telecommunications Inc., Woodbury, New York
ページ4に含まれる内容の要旨
3015_3000txt.book Page 4 Wednesday, August 4, 1999 11:13 AM NOTICE This publication refers to Telrad's Avanti 3015 set and Avanti 3000 set connected to Telrad's DIGI- TAL KEY BX system, Release SB7, or Telrad's DIGITAL 400 system, Release DB7, or Telrad’s DIGITAL 1000 system, Release LB7, as of July, 1999. Telrad reserves the right to modify the equipment and the software described herein without prior notice. However, changes made to the equipment or to the software described herein d
ページ5に含まれる内容の要旨
3015_3000txt.book Page iii Wednesday, August 4, 1999 11:13 AM CONTENTS ABOUT YOUR AVANTI TELEPHONE ................................................ 1 TELEPHONE SET BUTTONS ............................................................ 1 DISTINCTIVE RINGING ..................................................................... 6 MUTE ..................................................................................................7 HOT DIALPAD .....................................................
ページ6に含まれる内容の要旨
3015_3000txt.book Page iv Wednesday, August 4, 1999 11:13 AM Figure 1 Avanti 3015 set faceplate iv
ページ7に含まれる内容の要旨
3015_3000txt.book Page v Wednesday, August 4, 1999 11:13 AM Figure 2 Avanti 3000 set faceplate v
ページ8に含まれる内容の要旨
3015_3000txt.book Page 1 Wednesday, August 4, 1999 11:13 AM ABOUT YOUR AVANTI TELEPHONE The Avanti 3000 set and the Avanti 3015 set are equipped with onhook dialing and hot dialpad capability, which enable you to dial or operate any feature by pressing the dialpad buttons. Only when you speak it is necessary to lift the handset. NOTE This guide describes the regular operation of the telephone. The configuration of your particular system and telephone may introduce differences in opera
ページ9に含まれる内容の要旨
3015_3000txt.book Page 2 Wednesday, August 4, 1999 11:13 AM The telephone sets’ programmable buttons have dual-color light indicators. The color and flash rate of the indicators show the status of the programmed line, feature or exten- sion. In general, red indicates non-availability (for example, a busy line); green indicates that you are using the feature or line or that it is available to you. User-programmable buttons Some of the buttons on your telephone may be user-pro- grammable SP
ページ10に含まれる内容の要旨
3015_3000txt.book Page 3 Wednesday, August 4, 1999 11:13 AM [SPEED DIAL/PROGRAM] This button is used for speed dialing and for programming various features. [REDIAL/PAUSE] This buttons lets you automatically redial the last outside number you dialed, after first accessing an outside line. Pressing this button while dialing on an external line inserts a pause in a dialing sequence. [LO HI] This button adjusts the volume of the speaker, handset, headset, ringer and background music when an
ページ11に含まれる内容の要旨
3015_3000txt.book Page 4 Wednesday, August 4, 1999 11:13 AM [MSG] This button is used to send messages to other extensions and to reply to messages left at your extension. [DND] This button activates and deactivates Do Not Disturb. [MUTE] This button disables/enables your telephone microphone. [SPKR] For handsfree operation, press [SPKR] instead of lifting or replacing the handset. DN buttons DN buttons are buttons associated with specific Directory Numbers. The first DN button is your Pri
ページ12に含まれる内容の要旨
3015_3000txt.book Page 5 Wednesday, August 4, 1999 11:13 AM Many of the instructions offer a number of options, one of which is pressing a DN button. If your telephone set is not programmed with DN buttons, choose one of the other options, or skip the step of pressing the DN button. Some of the features operate slightly differently on a telephone set that is not programmed with DN buttons. These differences are indicated where relevant. Consult your System Adminis- trator for further
ページ13に含まれる内容の要旨
3015_3000txt.book Page 6 Wednesday, August 4, 1999 11:13 AM DISTINCTIVE RINGING You can program telephone sets located close to each other with distinctive rings, to enable you to identify which telephone is ringing. Nine different rings are available. To change the ring for your telephone set 1. Press [*] and [#] simultaneously. 2. Press one of the dialpad buttons ([1] - [9]). When you hear the ring that you want: 3. Press [#]. 4. Lift and replace the handset. Your telephone set reinitiali
ページ14に含まれる内容の要旨
3015_3000txt.book Page 7 Wednesday, August 4, 1999 11:13 AM MUTE If you want to talk to someone in your office during a call, without the connected party hearing, you can disable the handset or telephone set microphone. To enable or disable the microphone (MUTE) • Press [MUTE] during a conversation. To enable or disable the handset microphone (HANDSET MUTE) During a handset call: • Press [HS MUTE] (if programmed). NOTE If your set is Single Audio Path (SAP), pressing [MUTE] deactivates
ページ15に含まれる内容の要旨
3015_3000txt.book Page 8 Wednesday, August 4, 1999 11:13 AM HOT DIALPAD The hot dialpad enables you to dial and activate features without lifting the handset or pressing [SPKR] first. NOTE The instructions in this guide assume that you have hot dialpad capability. 8 Avanti 3015 and Avanti 3000 sets
ページ16に含まれる内容の要旨
3015_3000txt.book Page 9 Wednesday, August 4, 1999 11:13 AM INTERNAL CALLS To place a non-ringing call 1. Dial the extension number. When the called party answers: 2. Lift the handset to talk. To place a ringing call 1. Dial the TONE access code [1]. 2. Dial the extension number. If the extension you called is busy (CALL BACK) When you dial an extension and hear busy tone, you can activate the Callback feature: 1. Press [FEATURE]. 2. Dial the CALLBACK/QUEUE access code ([2][2]). 3. Hang up.
ページ17に含まれる内容の要旨
3015_3000txt.book Page 10 Wednesday, August 4, 1999 11:13 AM BARGE INTO A CONVERSATION Depending on system programming, you may be able to break into another conversation. When you dial an extension and hear busy tone: 1. Press [FEATURE]. 2. Dial the BARGE IN access code ([2][4]). A warning tone is heard by all parties, depending on system programming. PAGE CALLS You can make announcements through an external page unit, or through the speakers of all DIGITAL telephones in a page zone. 1.
ページ18に含まれる内容の要旨
3015_3000txt.book Page 11 Wednesday, August 4, 1999 11:13 AM ANSWERING CALLS When you receive a call an indicator flashes green on a telephone set that is programmed with DN buttons. You usually also hear a ring, unless your set has been pro- grammed not to ring. To answer a ringing or flashing call • Pick up the handset or • Press the flashing button and pick up the handset. After you answer the call the indicator of the DN or pri- vate trunk line lights steady green. To answer an interco
ページ19に含まれる内容の要旨
3015_3000txt.book Page 12 Wednesday, August 4, 1999 11:13 AM To return to the first call 1. Press [HOLD]. 2. Press the flashing DN button. or 1. Press [PICK UP]. 2. Press [HOLD]. NOTE If your telephone does not have DN buttons, you cannot put an internal call on hold. This means that you cannot answer another arriving internal call without disconnecting the first internal call. In this case, you must hang up first. You can then answer the second call when it rings. 12 Avanti 3015 and Ava
ページ20に含まれる内容の要旨
3015_3000txt.book Page 13 Wednesday, August 4, 1999 11:13 AM OUTSIDE CALLS Outside calls may be placed by accessing an outside line (or group) or using the Least Cost Routing (LCR) feature. When the instructions tell you to access an outside line, you may: • Dial an outside line or outside line group number; • Press an outside line or outside line group button; • Dial the LCR access code (usually [9]). To place an outside call 1. Obtain an outside line. 2. Dial the desired number. See also
