ページ1に含まれる内容の要旨
DESKPOWER 5000 Series User’s Manual
Fujitsu endeavours to ensure that the information in this document is correct, but accepts no liability
for any error or omission in the same. Any procedures described in this document for operating
Fujitsu products should be read and understood by the operator before such products are used.
To ensure that Fujitsu products function without risk to safety and health, such procedures should
be strictly observed by the operator. The development of Fujitsu product
ページ2に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions carefully. Save these instructions for future reference. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use this product near water. 5. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product. 6. Slots and ope
ページ3に含まれる内容の要旨
■ Greetings We thank you for purchasing the Fujitsu DESKPOWER 5000 personal computer. This manual explains how to use the hardware of the DESKPOWER 5000. Please read this manual carefully to ensure correct use of the DESKPOWER 5000. This unit may malfunction if the power source is interrupted suddenly, for example, due to lightning. Fujitsu recommends the use of an AC non-interruptible power supply unit. (Based on guidelines for the prevention of sudden voltage interruptions by Japan Electronic
ページ4に含まれる内容の要旨
■ Conventions used in this manual ● Warning icons Various icons and icon/word combinations are used in this manual to encourage users to use the equipment so as to minimize personal risk and prevent property damage. The icons are explained as follows. The user should be familiar with the icons before responding to the corresponding instructions. Indicates a hazardous situation that could result in fatal or serious WARNING wound if the correct procedure is not applied. Indicates a hazardous sit
ページ5に含まれる内容の要旨
● Conventions used in the text of the manual The symbols used in the text of the manual have meanings as explained below: ¤¤¤¤¤ Point Point indicates information necessary to run hardware or software. Help Help indicates information explaining how to terminate an incorrect operation or troubleshoot. ● Screen display examples Screen displays provided in this manual are examples and may be different from those (including file names) actually appearing on the display screen. ● Illustrations Illustr
ページ6に含まれる内容の要旨
■ Warning and caution labels The PC bears warning and caution labels as shown below. The warning and caution labels must not be removed or damaged. ● Rear of the PC main unit To prevent electric shock, WARNING switch off the PC and connected peripherals and Electric shock unplug power cords from respective outlets before disassembling the unit and installing a built-in option. ● Inside the PC main unit WARNING To prevent electric Electric shock shock and/or fire, do not remove the cover
ページ7に含まれる内容の要旨
Manual configuration Chapter 1 Installation and Connection This chapter outlines precautions that should be noted when installing the PC and explains how to connect various cables. Consult this chapter before assembling the PC. Chapter 2 Basic Operations This chapter explains basic operations required to use the PC, such as how to switch the power on and off and how to proceed with storage media. Consult this chapter. Chapter 3 Installing Internal Options This chapter explains how to install int
ページ8に含まれる内容の要旨
Content Chapter 1 Installation and Connection ............................................ 1 1 Installation ............................................................................. 2 Installation location .................................................................................... 2 Example of installing the PC ...................................................................... 2 Preventing electromagnetic interference with a TV or radio....................... 3 2 Connection ....
ページ9に含まれる内容の要旨
Chapter 3 Installing Internal Options ............................................. 19 1 Introduction ......................................................................... 20 Handling precautions ............................................................................... 20 Installing positions of internal options ...................................................... 21 Removing the upper cover ....................................................................... 22 Removing the front
ページ10に含まれる内容の要旨
Appendix .......................................................................................... 53 1 Name and Function of Each Component.......................... 54 Front of the PC main unit ......................................................................... 54 Rear of the PC main unit ......................................................................... 57 Inside the PC main unit ............................................................................ 58 Motherboard/riser boa
ページ11に含まれる内容の要旨
1 Chapter 1 Installation and Connection This chapter outlines precautions that should be noted when installing the PC and explains how to connect various cables.
ページ12に含まれる内容の要旨
1 Installation This section provides notes on installing and using the PC. ■ Installation location Do not install the PC in the following areas: - Area exposed to moisture, dust, or smoke - Area poorly ventilated - Area having open flames - Area that may expose the PC to water - Area exposed to direct sunlight or high temperatures. - Area having temperatures below 10 ˚C. - Area that are unusually small or crowded - Area having a strong magnetic field (close to a TV or speaker) - Area ex
ページ13に含まれる内容の要旨
■ Preventing electromagnetic interference with a TV or radio Your PC complies with the VCCI Standard restricting electromagnetic interference with a TV or radio. However, the computer may interfere with a TV or radio depending on the installation location. To prevent the PC from interfering with TV or radio reception, note the following: ● Precautions to be taken by the PC user - Do not use the PC with the cover removed. - Use the specified cable to connect the PC with a peripheral. Do not use
ページ14に含まれる内容の要旨
2 Connection Connect the display, keyboard, and power cord to your PC main unit WARNING Electric shock ● To prevent electric shock, ground the device (if required) before providing power to the equipment. To prevent fire, do not connect the ground wire to a gas pipe. Electric shock ● To prevent electric shock, unplug the PC main unit and connected equipment before attaching and detaching a CRT display, keyboard, mouse, LAN cables, and power cords. Electric shock ● To prevent electric shock, fir
ページ15に含まれる内容の要旨
■ Attaching CRT display, keyboard, mouse, and LAN cables ¤¤¤ Point ¤¤ This section explains how to connect the CRT display so as to supply power from the PC main unit. In this case, the power cord included with the CRT display is not used. Connect the power cord to the CRT display. Secure one end of the power cord (for CRT) to the inlet at the rear of the CRT display. Connect the power cord to the outlet. Secure the other end of the power cord (for CRT) to the outlet at the rear of the PC
ページ16に含まれる内容の要旨
■ Connecting the power cord After connecting the display and other peripherals to the PC main unit, note the following when connecting the power cord of the PC main unit. - Do not plug or unplug the power cord with wet hands. - Do not damage or remodel the power cord. - Do not bend, stretch, or place heavy objects on the power cord. - Do not use the PC if the power cord or plug is damaged - If the electrodes of the power cord plug or the corresponding outlet is dusty, wipe with a dry cloth. - Co
ページ17に含まれる内容の要旨
2 Chapter 2 Basic Operations This chapter explains basic operation methods of the PC such as how to turn the power on and off and handle storage media. 7
ページ18に含まれる内容の要旨
1 Switching on This section explains how to switch on the PC. CAUTION Prohibited action ● To prevent malfunction after turning on the PC, do not move equipment or subject equipment to shock and/or vibration. 1 Press the power switch of the CRT display. There is no display. 2 Press the power switch of the PC main unit. Power button The power lamps of the PC main unit and CRT display light up green. When the power is switched on, the Power On Self Test (POST) used to check the devices inside the P
ページ19に含まれる内容の要旨
¤¤¤¤¤ Point - Before switching on the PC, make sure that display is connected. If the PC is switched on before the display is connected, the display adapter may not be recognized, and the screen may not be displayed normally. In this case, connect the display, terminate the OS, switch off the PC, and then switch on the PC again. - If the display area is not centered on the screen, adjust the CRT display. - The power lamp lights up orange when the PC is placed in standby status. - If POST detec
ページ20に含まれる内容の要旨
2 Switching off This section explains how to turn off the PC. ¤¤¤ Point ¤¤ - Before turning off the power, terminate all jobs and save all necessary data. - Before turning off the power, confirm that the access indicator lamps ( see Appendix 1, "Name and Function of Each Component") of the floppy and hard disk drives are off. If the power is turned off while the access indicator lamps are on, data may be lost or data in the floppy disk or hard disk may be destroyed. - If the power cord is unplu
