ページ1に含まれる内容の要旨
CP155C / CP175C / CP1000C
GPS Chartplotter
Owner's Manual
ページ2に含まれる内容の要旨
WARNING!!! Electronic charts displayed by the chartplotter are believed to be accurate and reliable, but that are not intended to be a substitute for the official charts, which should remain your main reference for all matters related to the execution of safe navigation. For this reason we would like to remind you that you should carry on board and use the official published and approved nautical charts. FCC Compliance Statement This device complies with Part 15 of the FCC limits for Class
ページ3に含まれる内容の要旨
Congratulations on you purchase of the GPS chartplotter! Whether this is your first chartplotter, or if you have other STANDARD HORIZON equipment, the STANDARD HORIZON organization is committed to ensuring your enjoyment of this chartplotter. STANDARD HORIZON technical support personnel stand behind every product we sell, and our Product Support team invites you to contact us should you require technical advice or assistance, at 800/767-2450. CLEANING PROCEDURE FOR THE CHART PLOTTER SCREEN Clean
ページ4に含まれる内容の要旨
CAUTION - The chartplotter is designed for maritime use. Please give attention to avoid water + intrusion into the C-MAP NT C-CARD cartridge holder. - Extensive exposure to heat may result in damage to the chartplotter. - The chartplotter contains dangerous high voltage circuits which only experienced technicians can handle. - STANDARD HORIZON will not be liable for errors contained herein, or for incidental or consequential damages in connection with the performance or use of this material. Pag
ページ5に含まれる内容の要旨
TABLE OF CONTENTS 1. INTRODUCTION ...................................................................................................... 11 1.0 GENERAL INFORMATION .................................................................................... 11 1.1 PACKING LIST ...................................................................................................... 11 1.1.0 CP155C Packing List ................................................................................. 11 1.1.1 CP175C P
ページ6に含まれる内容の要旨
3.7 OTHER SETTINGS IN GENERAL SETUP MENU ................................................ 33 4. USING FIND SERVICES & MORE FUNCTION .............................................................. 35 4.0 PORT SERVICES................................................................................................... 35 4.1 OTHER AVAILABLE SEARCHES.......................................................................... 35 5. CREATING MARKS ..........................................................
ページ7に含まれる内容の要旨
10.9 VHF DIGITAL SELECTIVE CALLING .................................................................... 64 10.9.0 Interfacing .................................................................................................. 64 10.9.1 DSC Distress Call ...................................................................................... 65 10.9.2 Position Request ........................................................................................ 65 11. ADVANCED SETTINGS ...................
ページ8に含まれる内容の要旨
Page 10 GPS chartplotters
ページ9に含まれる内容の要旨
1. INTRODUCTION 1.0 GENERAL INFORMATION The GPS chartplotter is a precision-crafted, high-performance receiver for the Global Positioning System (WAAS GPS) constellation of satellites, providing precise location data with a host of navigation features. Idea for nautical use and sealed against water ingress. The GPS chartplotter is housed in a rugged, impact-resistant case with outstanding ergonomic design, for effortless operation. The advanced features of the GPS chartplotter include: · Direct
ページ10に含まれる内容の要旨
1.1.1 CP175C Packing List REPLACEMENT PART ITEM RR16000001 Quick Disconnect Bracket RR16000002 Protective Cover UU90000001 Flush mounting screws RR1600003 Flush mount template Q0000003 2 amp fuse and holder XUS0003911 Smart DGPS WAAS Antenna XUCMP0066 Owner’s Manual XUCMP0067 Quick Reference Guide 1.1.2 CP1000C Packing List REPLACEMENT PART ITEM XUS0003907 Bracket XUS0003908 Protective Cover XUS0003909 Flush mounting screws XUS0003910 Flush mount template XUS0003913 2 amp fuse and holder XUS0003
ページ11に含まれる内容の要旨
Figure 1.2.0b - Color Video Camera Figure 1.2.0ba - Extension Cable GPS chartplotters Page 13
ページ12に含まれる内容の要旨
Page 14 GPS chartplotters
ページ13に含まれる内容の要旨
2. GETTING STARTED 2.0 MOUNTING THE GPS CHARTPLOTTER The GPS chartplotter is supplied with hardware for bracket or flush mounting. Below are pictures showing actual examples of the two types of installation. 2.1 BRACKET MOUNTING The GPS chartplotter can be mounted using the supplied bracket. Before installing ensure the area the plotters bracket is mounted to is strong enough to support the weight of the chartplotter especially while under way. After the location is found, attach the mounting ba
ページ14に含まれる内容の要旨
2. Drill a hole in one area of the cut area that will allow the blade of a jig saw to be inserted. Insert and cut out the area on the panel using the jig saw. 3. Next drill the four holes required to insert the chartplotter with the mounting studs. 4. Install the mounting studs on the chartplotter and insert into the mounting hole. 5. Attach the chartplotter to the mounting location by attaching the supplied hardware to the mounting studs. Figure 2.2 - Installing/removing chartplotter (Flush)
ページ15に含まれる内容の要旨
2.3.0 Flush Mounting NOTE Before drilling holes, it is recommended the GPS antenna be positioned where the location is planned to be drilled, cable connected to the Plotter and the GPS chartplotter turned on to ensure a GPS FIX is received. 1. Remove the threaded base from the GPS antenna dome. 2. To ease installation a flush mounting template for the antenna has been included. 3. Apply the mounting template sticker to the area that was verified for GPS reception. 4. Then, drill out the 0.63” (1
ページ16に含まれる内容の要旨
2.4.0a Connection Table for CP155C/CP1000C 12VDC Power and NMEA Cable Pin Wire Color Description Connection Example 1 Black Battery Ground Connect to battery ground and Black wire of GPS Antenna 2 Red Battery Positive Connect to Battery Positive and Red wire of GPS Antenna 3 Green NMEA Common Common for NMEA devices 4 Blue VHF Input Conncect to VHF with DSC and DSE output 5 Brown VHF output Connect to VHF to supply GPS position data 6 Gray Fishfinder Input Standard Horizon Fishfinder, see FF520
ページ17に含まれる内容の要旨
2.4.1a Connection for CP155C 2.4.1b Connection for CP175C 2.4.1c Connection for CP1000C GPS chartplotters Page 19
ページ18に含まれる内容の要旨
2.5 BATTERY CONNECTIONS 1. The GPS chartplotter is supplied with a fuse and holder. This fuse should be installed into the Black wire to protect the NMEA output/input circuits from becoming damaged. 2. Connect the Red and Black wires from the GPS chartplotter and the GPS antenna together and route to a 12VDC source as direct as possible, 2.6 NMEA CONNECTIONS The GPS chartplotter can be connected external devices with NMEA and display informa- tion, examples: - DSC VHF Radio - Optional FF520 Dual
ページ19に含まれる内容の要旨
2.8 OPTIONAL BLACK BOX FISH FINDER STANDARD HORIZON offers an optional black box fish finder called FF520. Pls refer to the manual supplied with the Fish Finder for connections and operation. Figure 2.8 - Fish Finder FF520 2.9 CONNECTING DIGITAL INSTRUMENTS/AUTOPILOT/RADAR The GPS chartplotter can be connected to any of the following instrument if they have NMEA output: Depth Sounder, Speed Log with temperature, Wind Speed and Direction, Flux Gate Compass, Auto Pilot and Radar. Figure 2.9 - Con
ページ20に含まれる内容の要旨
2.11 NMEA DATA PAGE The NMEA Data Page is very useful to see if a External device (example: Depth Sounder) is transmitting NMEA sentences to the GPS chartplotter. This page can also be used to see if the GPS chartplotter NMEA output is being loaded down by a external NMEA device the GPS chartplotter is connected to. Scenario: VHF Radio connected but the radio is not receiving a GPS Position. Usually the VHF radio will be connected to the Green and Brown wires. To check to see if the GPS chartplo
