ページ1に含まれる内容の要旨
Operator's Manual
CRI FTSMRN°
GAR E TRACTO
Mower
26.0 HR* 54"
Electric Start
6 Speed Transaxle
Model No.
917.28955
• EspaSol, p. 35
This product has a low emission engine which operates
differently from previously built engines. Before you start the
engine, read and understand this Owner's Manual.
IMPORTANT:
For answers to your questions
about this product, Call:
Read and follow all Safety
1-800-659-5917
Rules and Instructions before
Sears Craftsman Help Line
operating this equipment.
5 am - 5 p
ページ2に含まれる内容の要旨
Maintenance ........................................ 19 Warranty ................................................ 2 Safety Rules .......................................... 3 Service and Adjustments ..................... 24 Product Specifications ........................... 6 Storage ................................................ 29 Assembly/Pre-Operation ....................... 8 Troubleshooting ................................... 30 Sears Service ........................ Back Cover Operation
ページ3に含まれる内容の要旨
_IbDANGER: This cutting machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death. • Never direct discharged material toward _h, WARNING: In order to prevent acciden- anyone. Avoid discharging material tal starting when setting up, transporting, against a wall or obstruction. Material may adjusting or making repairs, always discon- ricochet back toward the operator. Stop the nect spark plug w
ページ4に含まれる内容の要旨
Ii. SLOPE OPERATION • Never carry children, even with the blades shut off. They may fall off and be seriously Slopes are a major factor related to loss of injured or interfere with safe machine control and tip-over accidents, which can operation. Children who have been given result in severe injury or death. Operation rides in the past may suddenly appear in on all slopes requires extra caution. If you the mowing area for another ride and be run cannot back up the slope or if you feel uneasy ove
ページ5に含まれる内容の要旨
• Never make any adjustments or repairs • Keep the nozzle in contact with the rim of the fuel tank or container opening at all with the engine running. times until fueling is complete. Do not use • Check grass catcher components and the discharge guard frequently and replace a nozzle lock-open device. • Iffuel is spilled on clothing, change clothing with manufacturer's recommended parts, immediately. when necessary. • Mower blades are sharp. Wrap the blade • Never overfill fuel tank. Replace gas
ページ6に含まれる内容の要旨
PRODUCT SPECIFICATIONS In the state of California the above is required by law (Section 4442 of the California Public Gasoline Capacity 4 Gallons Resources Code). Other states may have and Type: Unleaded Regular similar laws. Federal laws apply on federal Oil Type SAE 10W30(above 32°F) lands. A spark arrester for the muffler is (API-SG-SL): SAE 5W30(below 32°F available through your nearest Sears service center (See REPAIR PARTS manual). Oil Capacity: 64 oz Spark Plug: Champion RC12YC REPAIR PRO
ページ7に含まれる内容の要旨
Mower Front Wheel (1) Wheel (_ (1) Locknut 3/8-16 (1) 1-1/40.D. Washer (1) Front Link _,, (5) Large Retainer Springs - 7/16 (1) 3/40.D. Washers ¢3Y (1) Anti-Swar Bar (2) Small Retainer Springs - 5/16 (2) Rear Lift Link Assemblies (5) 1-3/16 O.D. Washers Slope Sheet (2) Keys (1) Oil Drain Tube For Future Use 7
ページ8に含まれる内容の要旨
Your new tractor has been assembled at the factory with exception of those parts left unassembledfor shipping purposes. To ensure safe and proper operationof your tractor all parts and hardware you assemble must betightened securely. Use the correct tools as necessaryto insure propertightness. TOOLS REQUIRED FOR ASSEMBLY A socket wrench set will make assembly easier. Standard wrench sizes are listed. (2) 7/16" wrenches Utility knife (1) 1/2" wrench Tire pressure gauge (1) 3/4" wrench Pliers NOTE
ページ9に含まれる内容の要旨
iNSTALL MOWER AND DRIVE BELT - Pivot bar towards you and insert other end of bar into hole in rear mower bracket Be sure tractor is on level surface and engage (D). Move mower as needed to insert bar. parking brake. - Secure with washer and retainer spring 1. Lower attachment lift lever to it's lowest as shown. position. A CAUTION: Lift lever is spring loaded. Have a tight grip on lift lever, lower it slowly and engage in lowest position. 2. Turn steering wheel to the left as far as it will go a
ページ10に含まれる内容の要旨
11 .ATTACH FRONT LINK (E) - Work from 14. Install belt onto engine clutch pulley (M). left side of tractor. Insert rod end of link assembly through front hole in tractor front suspension bracket (F) and secure with retainer spring (G) through hole in link located behind the bracket. 12. Insert other end of link (E) into hole in front mower bracket (H) and secure with washer and retainer spring (J). IMPORTANT: Check belt for proper routing in all mower pulley grooves. 15. Engage belt tension rod
ページ11に含まれる内容の要旨
CHECK TIRE PRESSURE _'CHECKLIST The tires on your tractor were over-inflated at the factory for shipping purposes. Correct Before you operate your new tractor, we tire pressure is important for best cutting wish to assure that you receive the best performance. performance and satisfaction from this • Reducetire pressureto PSI shown ontires. Quality Product. CHECK DECK LEVELNESS Please review the following checklist: For best cutting results, mower housing _f All assembly instructions have been s
ページ12に含まれる内容の要旨
These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. R N H L I\l REVERSE NEUTRAL HIGH LOW CHOKE FAST SLOW IGNITION SWITCH ENGINE OFF REVERSE ENGINE ON ENGINE START PARKING BRAKE MOWER HEIGHT MOWER LIFT OPERATION SYSTEM (ROS) ® 0C3¢> E3 CRUISE CONTROL CLUTCH/BRAKE LIGHTS ON FUEL BATTERY REVERSE FORWARD PEDAL ®@®@@ ATTACHMENT ATTACHMENT DANGER, KEEP HANDS KEEP AREA CLEAR SLOPE HAZARDS CLUTCH DISENGAGED CLUTCH ENGAGED AND FEET AWAY
ページ13に含まれる内容の要旨
KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference. )3117 Our tractors conform to the applicable safety standards of the American National Standards Institute. (A) ATTACHMENT LIFT LEVER - Used to (G) REVERSE OPERATION SYSTEM raise and lower the mower or other attach- (ROS) "ON" POSITION - Allows op
ページ14に含まれる内容の要旨
The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend standard safety glasses or a wide vision safety mask worn over spectacles. NOTE: Failure to move throttle control be- HOW TO USE YOUR TRACTOR tween half and full speed (fast) position, be- TO SET PARKING BRAKE fore stopping, may cause engine to "backfire
ページ15に含まれる内容の要旨
TO MOVE FORWARD AND BACKWARD TO ADJUST GAUGE WHEELS The direction and speed of movement is Gauge wheels are properly adjusted when controlled by the gearshift lever (J). they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions. NOTE: Adjust gauge wheels with tractor on a flat level surface. 1. Adjust mower to desired cutting height (See "TO ADJUST MOWE
ページ16に含まれる内容の要旨
TO TRANSPORT REVERSE OPERATION SYSTEM (ROS) Your tractor is equipped with a Reverse • Raise attachment lift lever to its highest Operation System (ROS). Any attempt by position. • When pushing or towing your tractor, be the operator to travel in the reverse direction sure gearshift lever is in neutral position. with the attachment clutch engaged will shut • Do not push or tow tractor at more than off the engine unless ignition key is placed five (5) MPH. in the ROS "ON" position. NOTE: To protec
ページ17に含まれる内容の要旨
ADD GASOLINE 1. Sit on seat in operating position, depress • Fill fuel tank to bottom of filler neck. Do clutch/brake pedal and set parking brake. 2. Place gear shift lever in neutral position. not overfill. Use fresh, clean, regular 3. Move attachment clutch to disengaged unleaded gasoline with a minimum of position. 87 octane. (Use of leaded gasoline will 4. Move throttle control to fast position increase carbon and lead oxide deposits 5. Pull choke control outfor a cold engine start and reduc
ページ18に含まれる内容の要旨
MOWING TIPS • Tire chains cannot be used when the mower housing is attached to tractor. • Mower should be properly leveled for best mowing performance. See "TO LEVEL MOWER HOUSING" in the Service and Adjustments section of this manual. • The left hand side of mower should be used for trimming. • Drive so that clippings are discharged onto the area that has already been cut. Have the cut area to the right ofthe tractor. This will result in a more even distribution of clippings and more uniform cu
ページ19に含まれる内容の要旨
SCHEDULE Check Brake Operation Check Tire Pressure RT Check Operator Presence & ROS Systems A Check for Loose Fasteners V'3 C ChecWReplace Mower Blades T Lubrication Chart 0 Check Battery Level _4 R Clean Battery and Terminals Clean Debris Off Steering Plate Check Transaxle Cooling Check Mower Levelness V' Check V-Belts Check Engine Oil Level _1,2 Change Engine Oil (with oil filter) Change Engine Oil (without oil filter) NE Clean Air Filter G Clean Air Screen v" Inspect Muffler/Spark Attester N
ページ20に含まれる内容の要旨
TRACTOR CHECK REVERSE OPERATION (ROS) Always observe safety rules when per- SYSTEM forming any maintenance. • When the engine is running with the BRAKE OPERATION ignition switch in the engine "ON" posi- If tractor requires more than five (5) feet to tion and the attachment clutch engaged, stop at highest speed in highest gear on a any attempt by the operator to shift into level, dry concrete or paved surface, then reverse should shut off the engine. brake must be serviced. (See "TO CHECK • When
