ページ1に含まれる内容の要旨
Double 3
CODE
533A
OWNER’S HANDBOOK
(English Version)
FROM SERIAL NO: 533A001001 HANDBOOK: 533018 (Rev.0.)
Issue : Sept 2002
ページ2に含まれる内容の要旨
MAIN FEATURES /SPECIFICATIONS Main Features 1. Spark Plug Lead 2. Primer Button 3. Air Cleaner Cover 4. Engine Cover 5. Fuel Cap 22 12 13 11 6. Oil Filler Cap & Dipstick 10 7. Rear Dicharge - Chute 8. Rear Door Handle 9 21 9. Engine Start Grip 14 10. Ground Speed Lever 11. Ground Drive Clutch Lever 12. Engine Brake Lever 13. Handlebar 8 15 14. Throttle Control 7 15. Grassbag Assembly 6 5 16. Handlebar Securing Knobs 4 17. Handlebar Height Adjust Strap 3 18. Height of Cut Lever 16 19.
ページ3に含まれる内容の要旨
CONTENTS 1.1 Main Features/Specifications 1.2 Contents 1.17 Maintenance Schedule 1.3 Introduction 1.18 - 1.24 Mower Maintenance 1.18 - Engine 1.4 Warranty 1.18 - Throttle Cable Adjustment 1.18 - Carburettor Adjustments 1.5 - 1.8 Safety Precautions 1.19 - Oil Service 1.19 - Air Cleaner Service 1.8 Safety Symbols 1.20 - Spark Plug Service 1.8 Decal Symbols 1.20 - Keeping Engine Clean 1.20 - Grassbag 1.9 Assembling the Mower 1.21 - Deck Housing 1.9 - Delivery Checklist 1.21 - Securing Nuts and B
ページ4に含まれる内容の要旨
INTRODUCTION Thank you for purchasing a Hayter mower. The following pages are designed to help you gain safe and efficient service from your mower. IMPORTANT: This ‘Owners Handbook’ should be regarded as part of the mower as it gives essential information regarding mower safety, operation, maintenance and specifications. Read and understand this handbook prior to operating your mower for the first time. Make sure you are familiar with all the controls and points of regular maintenance. If you
ページ5に含まれる内容の要旨
WARRANTY LIMITED WARRANTY Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of three years from the date of purchase. The manufacturer of the engines furnish their own warranty and services are provided through their authorised network (Refer to "Engine Warranty Statement"). To qualify for the full benefit of the warranty, the warranty registration card must be returned within 6
ページ6に含まれる内容の要旨
SAFETY PRECAUTIONS Safety Alert Symbol This safety alert symbol indicates important safety messages. When you see this symbol be alert to the possibility of injury. Carefully read the following and inform others. Your mower is perfectly safe if used correctly. Failure to observe the following precautions may result in serious injury. Training Before using the mower read the owners handbook carefully. Pay par- ticular attention to the safety precautions. Ensure that you are familiar with the con
ページ7に含まれる内容の要旨
SAFETY PRECAUTIONS Preparation - Always use fresh fuel. Stale fuel can block the carburettor and cause leakage. - Replace fuel tank and oil tank caps securely. A damaged cutterblade or loose fixing bolt are major hazards. Before use, always visually inspect the cutting mechanism to ensure that it is in good condition. A damaged cutterblade must be replaced immedi- ately with a genuine Hayter replacement part Operation Do not operate the engine in a confined space where exhaust fumes (carbon mo
ページ8に含まれる内容の要旨
SAFETY PRECAUTIONS Operation Do not tilt the mower when starting the engine. Do not put hands or feet near or under rotating parts. Never pick up or carry the mower while the engine is running. Never lift/open the rear deflector/door while the engine is running. Never touch the exhaust/exhaust guard or cooling fins when the engine is hot. Stop the engine and disconnect the spark plug lead: - Before clearing blockages or unclogging the discharge chute. - Before cleaning/checking or working on the
ページ9に含まれる内容の要旨
SAFETY PRECAUTIONS Maintenance & Storage Allow the engine to cool before storing in any enclosure. To reduce the fire hazard, keep the engine and the surrounding deck area free of grass, leaves, or excessive grease. Check the rear deflector and grassbag frequently for wear or deterioration. Replace worn or damaged parts for safety. If the fuel tank has to be drained, this should be done outdoors and when the engine is cool. Wear strong work gloves when removing and reassembling the cut- terblade
ページ10に含まれる内容の要旨
Double 3 ASSEMBLING THE MOWER Delivery Checklist Remove the mower from the packaging and check that the following items have been supplied correctly. If any items are missing contact, your local Hayter dealer. 1. Engine Handbook. 4. Mulcher Plug Note.(Inside Chute) 2. Warranty Reg. Card. 5. Side Discharge Chute 3. Grassbag. To prevent accidents cut off the long ribbon attached to the grass- bag and discard. Handlebar Unscrew the handlebar securing knobs sufficiently to allow the handle- b
ページ11に含まれる内容の要旨
BEFORE STARTING THE MOWER Prevent Engine Damage To prevent engine damage the engine is shipped without oil or petrol. The engine must be filled with the correct grade of oil and petrol before starting the engine. Oil Type Always use high quality detergent oil classified SAE 30 Oil. Never use additives with this oil. To prolong the life of your engine it is important that the oil is changed after the first 5 hours of use - refer to ‘Maintenance Schedule’. Check Oil Level 0.15 Litres Clean aroun
ページ12に含まれる内容の要旨
Double 3 OPERATING THE MOWER Controls Operate all control levers several times and ensure that the cables move freely. Check that the engine stop and ground drive clutch levers return freely to their rest position when released. Starting - Step 1 Move the throttle control lever to the ‘Fast’ position. Step 2 Push the primer button 5 times allowing 2 seconds between each push. Step 3 Stand behind the mower and hold the handlebar with your left hand together with the engine stop lever. With
ページ13に含まれる内容の要旨
OPERATING THE MOWER Forward Travel Hold the handlebar and operate the ground drive clutch lever to power the mower in a forward direction. When the ground drive clutch lever is disengaged the mower may be pushed. This feature is useful when mowing in confined areas. The mower has a three speed rear wheel transmission system. To change the speed disengage the ground drive clutch lever. Move the transission speed control lever to the desired speed (Number 3 being the fastest position). Turning To
ページ14に含まれる内容の要旨
OPERATING THE MOWER Height of Cut Move the height of cut lever sideways to disengage it from the locking notch, then push forwards to raise or pull backwards to lower the height of cut. Release the lever in the required position and ensure that it locks firmly into one of the seven notch settings. Always select a height of cut to suit operating conditions. Prevent engine overloading and blockages by avoiding low cuts in long grass conditions. Be prepared to make two cuts when the grass is long.
ページ15に含まれる内容の要旨
OPERATING THE MOWER Side Discharge Remove the rear discharge chute by removing nuts and washers. Slide the assembly from under the the shoulder bolt (A). Slide the new side dicharge chute assembly under the shoulder bolt A (A). Then fasten the front and the back of the assembly with the fas- teners. A Heavy Growth To prevent engine overloading and blockages be prepared to make two cuts in areas of heavy growth. If collection is required, first mow the area at the maximum height of cut setting
ページ16に含まれる内容の要旨
LAWN CARE CALENDAR To be used as a guide only. January There is very little work to do this month apart from brushing away leaves. Keep off the grass if frozen or waterlogged. February Rake the grass thoroughly. Spike the lawn to aerate and stimulate soil organisms and root growth and apply lawn sand if necessary. March The yearly lawn work programme really starts this month. As soon as the ground conditions are suitable, the first cut can be made. The first cut should merely “top” the grass as
ページ17に含まれる内容の要旨
LAWN CARE CALENDAR August Keep mowing regularly and watering as necessary. Fill any cracks caused by drought with a mixture of sharp sand and soil. In dry weath- er conditions leave the grass longer to help retain ground moisture. September Raise the height of cut to allow the grass to thicken and protect the roots from the winter frost and snow. October Rake out the thatch from the turf and spike the lawn to assist in drainage. Brush in peat and sharp sand. November Use a stiff broom to dispers
ページ18に含まれる内容の要旨
MAINTENANCE SCHEDULE Follow the hourly or calendar intervals, whichever occurs first. More frequent service will be required if working for prolonged periods under dusty, dry conditions, or when airborne debris is present or after extensive operation cutting tall, dry grass. First 5Hrs After the very first five hours change the engine oil Daily Check the oil level Remove grass debris from around the engine, exhaust/exhaust guard and air ways in the top cowl and underside of the deck housing.
ページ19に含まれる内容の要旨
2 1 MOWER MAINTENANCE To prevent accidents stop the engine disconnect the spark plug lead before attempting to carry out maintenance procedures on the mower. Engine 8 1. Engine Cowl 7 2. Carburettor 6 9 3. Spark Plug / Lead 10 4. Exhaust Guard 5. Exhaust 6. Oil filler Cap/ Dipstick 11 7. Start Grip 1 8. Fuel Cap 9. Finger Guard 2 5 10. Air Cleaner 4 11. Primer Button 3 Throttle Cable Adjustment Loosen the outer cable clamp screw (1) and move the governor control lever (2) as far back as possi
ページ20に含まれる内容の要旨
MAINTENANCE MOWER Oil Service Check the oil level daily before starting the engine and ensure that the correct oil level is maintained. Refer to-‘Before Starting the Mower’ for oil checking and filling instructions. Change the engine oil after the first 5 hours of operation and thereafter according to the ‘Maintenance Schedule’:- 1. Drain fuel by running the engine until the fuel tank is empty. 2. Remove the spark plug lead. 3. Allow the engine to cool. 4. Drain the oil while the engine i
