ページ1に含まれる内容の要旨
02494
LT1536
Owner's Manual
ページ2に含まれる内容の要旨
SAFETY RULES Safe Operation Practices for Ride-On Mowers IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROW ING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. Disengage blades when not mowing. Shut off engine and wait for all parts to come to a complete stop before WARNING: In order to prevent ac- cleaning the machine, removing the grass catcher, or ci den tal starting when setting up, unclogging
ページ3に含まれる内容の要旨
SAFETY RULES Safe Operation Practices for Ride-On Mowers III. CHILDREN GENERAL SERVICE Tragic accidents can occur if the operator is not alert to Never operate machine in a closed are. Keep all nuts and bolts tight to be sure the equipment the presence of children. Children are often attracted to the ma chine and the mowing activity. Never assume that is in safe working condition. Never tamper with safety devices. Check their proper children will remain where you last saw the
ページ4に含まれる内容の要旨
CONGRATULATIONS on your purchase of a new tractor. PRODUCT SPECIFICATIONS It has been designed, engineered and manu factured to giv e Gasoline Capacity 1.25 Gallons you the best possible dependability and performance. and type: Unleaded Regular Should you experience any problem you cannot easily rem- Oil Type (API-SG-SL): SAE 10W30 (above 32°F) edy, please contact your nearest authorized service center/ SAE 5W-30 (below 32°F) department. We have com pe tent, well-trained tech ni cians
ページ5に含まれる内容の要旨
Key (2) Keys UNASSEMBLED PARTS Seat Steering Wheel (1) Washer 17/32 x 1-3/16 x 12 Gauge Steering (1) Knob Wheel Adapter Steering Wheel Insert (2) Keps Nut 1/4-20 Steering Steering Boot Extension (2) Hex Bolts 1/4-20 x 3/4 Shaft (1) Oil Drain Tube For Future Use Slope Sheet (1) 5/16 (1) Large Flat Lock Washer Washer (1) Hex Bolt 5/16-18 x 4 5
ページ6に含まれる内容の要旨
ASSEMBLY Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness. TOOLS REQUIRED FOR ASSEMBLY A socket wrench set will make assembly easier. Stan dard INSERT wrench sizes are listed. 5/16 HEX BOLT (2) 7/16" wrenches Pliers 5/16 LOCK (1) 3/4" wrench
ページ7に含まれる内容の要旨
ASSEMBLY SEAT DISCARD TER MI NAL SHOULDER PROTECTIVE CAPS BOLT KEPS TERMINAL NUT HEX BOLT COVER SEAT PAN 02604 NEGATIVE (BLACK) POSITIVE (RED) CABLE CABLE FIG. 3 FLAT WASHER SEAT PAN LABEL 02464 ADJUSTMENT KNOB FIG. 2 CONNECT BATTERY (See Figs. 3 and 4) 02602 CAUTION: Do not short battery termi- nals by allowing a wrench or any other FIG. 4 object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch NOTE: You may now roll or drive
ページ8に含まれる内容の要旨
ASSEMBLY TO DRIVE TRACTOR OFF SKID (See Op- ✓CHE CKLIST er a tion section for location and func tion of BEFORE YOU OPERATE AND ENJOY YOUR NEW TRAC- con trols) T OR, WE WISH TO ASSURE THAT YOU RE CEIVE THE WARNING: Before starting, read, un der stand and follow BEST PER FORM ANCE AND SATISFACTION FROM THIS all in struc tions in the Operation section of this manual. Be QUALITY PR ODUCT. sure tractor is in a well-ventilated area. Be sure the area in PLEASE REVIEW THE FOLLOWING CHECKLIST: fro
ページ9に含まれる内容の要旨
OPERATION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. FAST IGNITION REVERSE NEUTRAL HIGH LOW SLOW CHOKE P LIGHTSON ENGINEON ENGINESTART PARKINGBRAKE ENGINEOFF PARKINGBRAKE PARKINGBRAKE LOCKED UNLOCKED FUEL OILPRESSURE BATTERY REVERSE FORWARD OVERTEMP MOWERHEIGHT MOWERLIFT LIGHT 15 15 ATTACHMENT ATTACHMENT SLOPEHAZARDS CLUTCHENGAGED CLUTCHDISENGAGED DANGER,KEEPHANDS KEEPAREACLEAR ANDFEETAWAY (SEESAFETYRULESSECTION) DANG
ページ10に含まれる内容の要旨
OPERATION KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and ad just ments. Save this manual for future reference. LIGHT SWITCH IGNITION ATTACHMENT POSITION SWITCH CLUTCH LEVER LIFT LEVER PLUNGER THROTTLE/CHOKE ATTACHMENT CONTROL LIFT LEVER CLUTCH/ BRAKE HEIGHT PEDAL ADJUSTMENT INDICATOR GEARSHIFT LEVER PARKING BRAKE FIG. 5 Our tractors con
ページ11に含まれる内容の要旨
OPERATION The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye dam age. Always wear safety glass es or eye shields while op- erating your tractor or per form ing any adjustments or repairs. We rec om mend a wide vision safety mask over spectacles or stan dard safety glasses. IMPORTANT: LEAVING THE IGNITION SWITCH IN ANY HOW TO USE YOUR TRACTOR POSITION OTHER THAN "OFF" WILL CAUSE THE BATTERY TO BE DIS CHARGED, (DEAD). TO SET PARK
ページ12に含まれる内容の要旨
01994 OPERATION TO OPERATE MOWER (See Fig. 7) TO TRANSPORT Your tractor is equipped with an operator presence sensing Raise attachment lift to highest position with at tach ment switch. Any attempt by the operator to leave the seat with lift control. the engine running and the attachment clutch engaged When pushing or towing your tractor, be sure gearshift will shut off the engine. You must remain fully and centrally lever is in neutral (N) position. positioned in the seat to
ページ13に含まれる内容の要旨
OPERATION MOWING TIPS CAUTION: Alcohol blended fuels (called gasohol Mower should be properly leveled for best mowing per- or using ethanol or methanol) can attract moisture fo r mance. See “TO LEVEL MOWER HOUSING” in the which leads to sep a ra tion and for ma tion of acids Service and Adjustments section of this manual. during storage. Acidic gas can damage the fuel sys- The left hand side of mower should be used for trim- tem of an engine while in storage. To avoid engine
ページ14に含まれる内容の要旨
maint_sch-tractore.new1 MAINTENANCE MAINTENANCESCHEDULE FILL IN DATES AS YOU COMPLETE REGULAR SERVICE SERVICE DATES Check Brake Operation Check Tire Pressure Check Operator Presence and Interlock Systems T R Check for Loose Fasteners 5 A Sharpen/Replace Mower Blades 3 C Lubrication Chart T Check Battery Level 4 0 Clean Battery and Terminals R Check Transaxle Cooling Check V-Belts Check Engine Oil Level Change Engine Oil (with oil filter) 1,2 Change Engine Oil (without oil filter) 1,2 E Clean Air
ページ15に含まれる内容の要旨
MAINTENANCE TRACTOR MANDREL ASSEMBLY TRAILING Always observe safety rules when performing any main- EDGE UP te nance. CEN TER BRAKE OPERATION HOLE If tractor requires more than fi ve (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be checked and adjusted, then LOCK WASHER STAR brake must be adjusted. (See “TO ADJUST BRAKE” in the Service and Adjustments section of this manual). BLADE FLAT WASHER TIRES BLADE BOLT Maintain prop
ページ16に含まれる内容の要旨
MAINTENANCE NOTE: The original equipment battery on your tractor is OIL DRAIN VALVE maintenance free. Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not nec es sary. TO CLEAN BATTERY AND TERMINALS CLOSED Corrosion and dirt on the battery and terminals can cause AND the battery to “leak” power. LOCKED Disconnect BLACK battery cable fi rst then RED bat- POSITION tery cable and remove battery from tractor. Rinse the battery with plain
ページ17に含まれる内容の要旨
00667 MAINTENANCE AIR FILTER IN-LINE FUEL FILTER (See Fig. 13) Your engine will not run properly using a dirty air fi lter. The fuel fi lter should be replaced once each season. If fuel Service air cleaner more often under dusty conditions. See fi lter becomes clogged, ob struct ing fuel fl ow to car bure tor, Engine Manual. re place ment is re quired. With engine cool, remove fi lter and plug fuel line sec- ENGINE OIL FILTER tions. Replace the engine oil fi lter every season or every other
ページ18に含まれる内容の要旨
38 42 SERVICE AND ADJUSTMENTS WARNING: TO AVOID SE RI OUS IN JU RY, BEFORE PERFORMING ANY SERVICE OR AD JUST - MENTS: Depress clutch/brake pedal fully and set parking brake. Place gearshift lever in neutral (N) position. Place attachment clutch in “DISENGAGED” position. Turn ignition key to “STOP” and remove key. Make sure the blades and all moving parts have completely stopped. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with
ページ19に含まれる内容の要旨
01156 SERVICE AND ADJUSTMENTS Place fl at washer and clutch spring on idler pulley bolt FRONT-TO-BACK ADJUSTMENT (See Figs. 17 and 18) and secure with small retainer spring. IMPORTANT: DECK MUST BE LEVEL SIDE-TO-SIDE. IF THE FOLLOWING FRONT -TO-BACK ADJUSTMENT IS NECESSARY , Install belt onto engine pulley. BE SURE TO AD JUST BOTH FRONT LINKS EQUAL LY SO MOWER WILL STAY LEVEL SIDE-TO-SIDE. TO LEVEL MOWER HOUSING To obtain the best cutting results, the mower housing Adjust t
ページ20に含まれる内容の要旨
38 42 02472 SERVICE AND ADJUSTMENTS TO REPLACE MOWER BLADE DRIVE BELT TO CHECK AND ADJUST BRAKE (See Fig. 20) (See Fig. 19) Your tractor is equipped with an ad just able brake system which is mounted on the right side of the transaxle. The mower blade drive belt may be replaced without tools. Park the tractor on level surface. Engage parking brake. If tractor requires more than fi ve (5) feet to stop at highest speed in high est gear on a level, dry concrete or paved BELT REMOVAL - surfa
