EdgeStar KC2000SSTWINの取扱説明書

ページ1に含まれる内容の要旨

Beer Dispenser

Models:
KC2000TWIN, KC2000SSTWIN
Dual-tap Tower Installation Guide
For more information on other great EdgeStar products on the web, go to http://www.edgestar.com

ページ2に含まれる内容の要旨

Introduction Thank you for choosing EdgeStar. This guide is a supplement to the EdgeStar Beer Dispenser Guide for your KC2000TWIN or KC2000SSTWIN EdgeStar Full Size Dual Tap Kegerator & Draft Beer Dispenser. Please follow the EdgeStar Beer Dispenser Guide for step-by-step instructions. You may download the latest guide at Parts Identification 12 3 456 7 8 9 1. 3” Double Tower and Gasket 2. Singe Gauge Regulator 3. Five Pound CO2 Tank wit

ページ3に含まれる内容の要旨

Quick Overview Diagram The image below should give you a visual reference on setting up your Kegerator.

ページ4に含まれる内容の要旨

Install and Secure the Tower 1. Remove the plastic plug from the top of the cabinet by opening the door and pushing up. 2. Place the rubber gasket on the cabinet and align the holes. (Note: Some models may require you drill holes on the top of the unit.) 3. Unravel the beer line from the inside of the tower and pass it through the rubber gasket and the hole on the top of the beer refrigerator. 4. Place the tower facing forward and insert the bolts through top of the cabinet. 5. Inser