ページ1に含まれる内容の要旨
FLX15
FLX10
FLEX ARM
Published 2006-05-30 S/N A10100128508 - A10100152509 Part No. A101TG010P
PARTS MANUAL
An Operators Manual with IMPORTANT Safety, Assembly, Operation
and Maintenance information was packaged with this Parts Manual
during final inspection at the factory. If the Operators Manual is
missing at any time, please contact Tiger Corporation to receive your
free replacement manual.
Tiger Corporation
3301 N. Louise Ave.
Sioux Falls, SD 57107
1-800-843-6849
1-605-336-7900
ww
ページ2に含まれる内容の要旨
PARTS ORDERING GUIDE The following instructions are offered to help eliminate delay and error in processing purchase orders for the equipment in this section. 1. The Purchase Order must include the name and address of the person or organization ordering the parts, who should be charged, and if possible, the serial number of the machine for which the parts were ordered. 2. The Purchase Order must clearly list the quantity of each part, the complete and correct part number, and the description of
ページ3に含まれる内容の要旨
TABLE OF CONTENTS HITCH ASSEMBLY ................................................................. 6-4 PRECISION CLEVIS ................................................................ 6-5 PRECISION HITCH ................................................................. 6-6 BEARING MOUNT ASSEMBLY ........................................................ 6-7 ARM ASSEMBLY ................................................................... 6-8 FRAME ASSEMBLY .........................................
ページ4に含まれる内容の要旨
HITCH ASSEMBLY Ref. Part No. Description Qty. 1 A101-110 Hitch frame 1 2 A101-145 Pin, hitch frame 1 3 256-011 Washer, 1/2" 4 4 250-057 Bolt, 1/2" x 2" UNC 1 5 270-007 Locknut, 1/2" UNC 4 6 256-0533 Machine bushing, 2" x 3" x 10ga 1 7 A101-171 Hitch Swivel - *sold with 774-012 1 774-012 Weld sleeve - *sold with A101-171 1 8 A101-112 Sleeve sub-assembly 1 9 250-107 Bolt, 3/4" x 6" UNC 2 10 250-127 Bolt, 1" x 2-1/2" UNC 1 11 270-002 Locknut, 1" UNC 1 12 256-0011 Washer, 1" x 1/4" Thick 1 13 S000-0
ページ5に含まれる内容の要旨
PRECISION CLEVIS (C000-360) Ref. Part No. Description Qty. 1 C000-360 Hitch block 1 2 362-015 Tension bushing, 1" x 1-1/4" x 1" lg 2 3 C000-363 Wear plate 1 4 C000-362 Spacer plate 6 5 255-005 Lockwasher, 5/8" 2 6 250-090 Bolt, 5/8" x 2" UNC 2 FLX15/10 09/05 6-5
ページ6に含まれる内容の要旨
PRECISION HITCH (C000-300) Ref. Part No. Description Qty. 1 250-109 Bolt, 3/4 x 5-1/2 UNC 2 2 250-059 Bolt, ½ x 1-1/2 UNC 1 3 C000-202 Bolt, 1-1/8 x 5-1/2 UNF 1 4 C000-303 Drawbar clevis top 1 5 C000-301 Hitch tongue 1 6 273-001 Grease nipple, 1/8 NPT 3 7 C000-305 Spacer 1 8 C000-302 Draw bar clevis base 1 9 257-003 Lock nut, 1-1/8 UNF 1 10 C000-304 Clamp bar 1 11 270-001 Lock nut, 3/4 UNC 2 12 255-009 Lock washer, ½ 1 13 271-011 Cotter pin, 1/4 x 2-1/2 1 14 256-0712 Machine Bushing Spacer 1 (On
ページ7に含まれる内容の要旨
BEARING MOUNT ASSEMBLY Ref. Part No. Description Qty. 1 264-004 Retaining ring, internal 1 2 356-310 Locking Collar / Bearing set 1 3 A101-150 Bearing holder 1 4 A101-152 Rubber ring, vibration isolator 2 5 A101-153 Bearing stand 1 6 A101-155 Washer, 4-1/16" x 7 ga 1 7 264-014 Retaining ring, external 1 8 A101-154 Shield 1 9 270-007 Locknut, 1/2" UNC 4 10 256-011 Washer, 1/2" 2 11 250-057 Bolt, 1/2" x 2" UNC 2 12 273-006 Grease nipple, self tap 2 13 250-127 Bolt, 1" x 2-1/2" UNC 2 14 250-060 Bol
ページ8に含まれる内容の要旨
ARM ASSEMBLY FLX15/10 09/05 6-8
ページ9に含まれる内容の要旨
ARM ASSEMBLY Ref. Part No. Description Qty. 1 262-004 Roll pin, 3/8" x 3" 1 2 256-3533 Machine bushing, 2" x 3" x 10ga 1 3 362-011 Tension bushing, 1" x 1-1/4" x 1-1/2" long 3 4 A101-141 Pin, arm assembly 1 5 273-011 Grease nipple, 90° self tap 2 6 250-0542 Bolt, 1/2" x 2-1/4" UNC 2 7 256-011 Washer, 1/2" 6 8 270-007 Locknut, 1/2" UNC 3 9 A101-136 Hydraulic hose stand 2 10 270-017 Locknut, 3/8" UNC 14 11 250-025 Bolt, 3/8" x 2-1/4" UNC 9 12 273-006 Grease nipple, self tap 6 13 A101-143 Pin, gear
ページ10に含まれる内容の要旨
FRAME ASSEMBLY FLX15/10 09/05 6-10
ページ11に含まれる内容の要旨
FRAME ASSEMBLY Ref. Part No. Description Qty. 1 A101-101 FLX15 Main frame 1 A102-101 FLX10 Main frame *not shown 1 2 362-0121 Tension bushing, 1-1/2" x 1-3/4" x 1" long 3 **not required on FLX10 3 250-025 Bolt, 3/8" x 2-1/4" UNC 8 4 270-017 Locknut, 3/8" UNC 15 5 A101-137 Transport light mount 1 6 270-020 Locknut, 5/16" UNC 2 7 256-020 Washer, 5/16" 2 8 250-007 Bolt, 5/16" x 1" UNC 2 9 S000-073 Transport light kit *left light shown only 1 10 A101-139 Hose clamp 2 11 250-026 Bolt, 3/8" x 2-1/2" U
ページ12に含まれる内容の要旨
CASTOR FRAME ASSEMBLY (FLX15 ONLY) Ref. Part No. Description Qty. 1 A101-104 Castor frame 1 2 256-011 Washer, 1/2" 3 3 250-057 Bolt, 1/2" x 2" UNC 1 4 273-006 Grease nipple, self tap 1 5 A101-144 Pin, castor frame 1 6 A101-146 Pin, castor link 2 7 273-011 Grease nipple, 90° self tap 2 8 250-063 Bolt, 1/2" x 1" UNC 2 9 255-009 Lock washer, 1/2" 2 10 256-001 Washer, 1" SAE type 2 11 262-006 Roll pin, 3/8" x 2" 2 12 362-011 Tension bushing, 1" x 1-1/4" x 1-1/2" long 1 13 262-005 Roll pin, 3/8" x 2-
ページ13に含まれる内容の要旨
CASTOR WHEEL ASSEMBLY Ref. Part No. Description Qty. 1 257-014 Jam nut, 3/4" UNF 2 2 256-510 Belville washer, 60 x 20.5 x 2.5mm 2 3 256-003 Washer, 3/4" 1 4 A101-122 Castor washer 1 5 A101-123 Castor spacer 1 6 364-001 Nylatron bushing, 2-1/2" x 3" x 2" long 2 7 273-006 Grease nipple, self tap 2 8 270-001 Locknut, 3/4" UNC 1 9 A101-124 Nylon castor disc 1 10 A101-120 Castor 1 11 250-114 Bolt, 3/4" x 2-1/2" UNC 1 12 208-026 Spindle, S618, 2" x 14-7/8" 1 13 250-050 Bolt, 1/2" x 3-1/2" UNC 1 14 270
ページ14に含まれる内容の要旨
HUB & TIRE ASSEMBLY Ref. Part No. Description Qty. 1 206-003 Hub, H618 complete, includes ref #2-11 1 2 207-018 Seal 1 3 207-013 Bearing 1 4 207-014 Race 1 5 273-002 Grease nipple, 45° 1/8" NPT 1 6 207-016 Race 1 7 207-015 Bearing 1 8 209-010 Washer, 1" 1 9 209-011 Castle nut, 1"-14 UNS 1 10 271-005 Cotter pin, 3/16" 1 11 207-017 Dust cap 1 12 257-032 Nut, 3/8" UNC 10 13 255-013 Lock washer, 3/8" 10 14 201-016 Rim half 2 15 210-011 Tire only 1 16 211-013 Tube 1 17 250-018 Bolt, 3/8" x 1" UNC 10
ページ15に含まれる内容の要旨
HITCH JACK, 10" SIDE WIND (232-500) Ref. Part No. Description Qty. 1 232-651 Gear cover 1 2 232-652 Bushing 2 3 232-653 Gear 2 4 232-654 Bolt, 1/4" x 3" UNC 2 5 232-655 Nut, 1/4" UNC 2 6 232-656 Pin, long 1 7 232-657 Handle 1 8 232-658 Washer, 1/2" x 1-1/2" 1 9 232-659 Lock pin & chain 1 10 232-660 Pin, long 1 11 232-661 Main body 1 12 232-662 Washer, 1/2" x 1-5/16" x 10ga 1 13 232-663 Washer, 1/2" x 1-1/16" 2 14 232-664 Felt bushing 1 15 232-665 Bearing 1 16 232-666 Washer, 1/2" x 1-1/16" x 7ga
ページ16に含まれる内容の要旨
SAFETY TOW CHAIN (S000-010) NOTE: This safety chain is intended as an auxiliary attaching system per ASAE S338.3. The safety chain help control the flex arm should it accidentally separate from the drawbar, or the rotary cutter should it accidentally separate from the flex arm. Do not use the safety chain for towing. Replace the entire chain if any link or end fitting is broken, damaged or stretched. Ref. Part No. Description Qty. 1 S000-010 Safety tow chain, 10,000 lbs capacity 59" minimum l
ページ17に含まれる内容の要旨
TRANSPORT LIGHT KIT The lights are to be mounted with the red and amber facing to the rear, with the outside light being the amber. Ref. Part No. Description Qty. 1 S000-073 Light set, left and right dual lights FLX15 Includes a 7 pin ag plug, & harness 1 S000-072 Light set, left and right dual lights FLX10 Includes a 7 pin ag plug, & harness 1 2 270-017 Locknut, 3/8" UNC 4 3 S000-046 Rear beam light mount 1 4 258-111 U-bolt, 5" x 6" x 3/8" UNC XH1500/XH1000 1 258-1101 U-bolt, 4 x 4-3/4" x 3/8"
ページ18に含まれる内容の要旨
HYDRAULIC CIRCUIT FLX15/10 09/05 6-18
ページ19に含まれる内容の要旨
HYDRAULIC CIRCUIT Ref. Part No. Description Qty. 1 111-260 Hydraulic hose, 230" M - M, FLX15 4 111-257 Hydraulic hose, 200" M - M, FLX10 3 2 111-258 Hydraulic hose, 250" M - F, FLX15 1 111-259 Hydraulic hose, 223" M - F, FLX10 1 3 111-261 Hydraulic hose, 230" M - F, FLX15 1 111-195 Hydraulic hose, 203" M - F, FLX10 1 4 302-015 Clevis pin, 1" x 2-7/8" UL 2 5 100-3102 Hydraulic cylinder, 24" stroke, FLX15 1 100-3077 Hydraulic cylinder, 20" stroke, FLX10 1 6 256-001 Washer, 1" SAE type 7 8 250-063
ページ20に含まれる内容の要旨
HYDRAULIC CYLINDER 100-3077 RAM-LOK, 3" bore x 20" stroke w/ 4" stop tube Location: FLX10 100-3102 RAM-LOK 3" bore x 24" stroke Location: FLX15 Ref. Part No. Description Qty. 1 102-280 Butt clevis 1 2 102-281 Piston nut 1 3 102-283 Piston 1 4 102-282 Retaining wire 2 5 102-285 Barrel, 24" FLX15 1 102-290 Barrel, 20" FLX10 1 6 102-287 Rod clevis 1 7 102-284 Rod, 24" FLX15 1 102-289 Rod, 20" FLX10 1 8 102-286 Cylinder head 1 9 102-288 Seal kit 1 10* 102-291 Stop tube FLX10 only 1 FLX15/10 09/05 6-
