ページ1に含まれる内容の要旨
Ambient Weather WS-0100 Advanced Weather Station
User Manual
Table of Contents
1. Introduction ..................................................................................................................................... 2
2. Getting Started ................................................................................................................................ 2
2.1 Parts List .............................................................................................
ページ2に含まれる内容の要旨
1. Introduction Thank you for your purchase of the Ambient Weather WS-0100 Advanced Weather Station with time, indoor temperature and outdoor temperature and outdoor humidity. The following user guide provides step by step instructions for installation, operation and troubleshooting. To download the latest manual and additional troubleshooting tips, please visit: http://ambientweather.wikispaces.com/ws0100 2. Getting Started The WS-0100 weather station consists of a display consol
ページ3に含まれる内容の要旨
Figure 1 2.4 Display Console Set Up Note: To avoid permanent damage, please take note of the battery polarity before inserting the batteries. Move the remote thermo-hygrometer at least 10’ away from the display console (if the sensor is too close, it may not be received by the display console). Remove the battery door on the back of the display. Insert two AA (alkaline or lithium, avoid rechargeable) batteries in the back of the display console. All of the LCD segments will lig
ページ4に含まれる内容の要旨
Use 3 screws to affix the mounting bracket to the wall. Connect the remote sensor to the wall bracket with a precision screwdriver. Figure 3 4. Console Operation Note: After 30 seconds of inactivity, the display will automatically revert to the normal display mode (automatic time out). 4.1 Set Time and Units Note: In 12 hour mode (USA), the temperature will display °F. In 24 hour mode, the temperature will display °C. Note: The SET and MIN/MAX functions us
ページ5に含まれる内容の要旨
4.3 Multi-Channel Operation The WS-0100 supports up to three WH-2C remote thermo-hygrometers (one is included). The optional sensors can be purchased at AmbientWeather.com. 4.3.1 Sensor Initialization Power up the sensors and console in the following order: 1. Power up the console. Do not touch any of the buttons, as described in Section 2.4. 2. Power up the first remote thermo-hygrometer as described in Section 2.5. Wait until the sensor reports into the console. 3. Power up the sec
ページ6に含まれる内容の要旨
Frequency: 433 MHz Update Rate: 48 seconds 6.2 Measurement Specifications The following table provides specifications for the measured parameters. Measurement Range Accuracy Resolution Indoor Temperature 32 to 140 °F ± 2 °F 0.1 °F Outdoor Temperature -40 to 149 °F ± 2 °F 0.1 °F Outdoor Humidity 20 to 95% ± 5% 1 % 6.3 Power Consumption Base station : 2 x AA 1.5V Alkaline batteries Remote sensor : 2 x AAA 1.5V Alkaline batteries Battery life: Minimum 24 months for base
ページ7に含まれる内容の要旨
Problem Solution Move the remote sensor to a higher location. Move the remote sensor to a closer location. Radio Frequency (RF) Sensors cannot transmit through metal barriers (example, aluminum siding) or multiple, thick walls. Temperature sensor reads too high in the Make sure the thermo-hygrometer is mounted in a day time. shaded area on the north facing wall. Consider the following radiation shield if this is not possible: http://www.ambientweather.com/amwesrpatean.html Indoor
ページ8に含まれる内容の要旨
wild country and/or in unauthorized grounds strongly damages the environment. Reading the “User manual” is highly recommended. The manufacturer and supplier cannot accept any responsibility for any incorrect readings and any consequences that occur should an inaccurate reading take place. This product is designed for use in the home only as indication of weather conditions. This product is not to be used for medical purposes or for public information. The specifications of this pro
ページ9に含まれる内容の要旨
This limited warranty begins on the original date of purchase, is valid only on products purchased and only to the original purchaser of this product. To receive warranty service, the purchaser must contact Ambient, LLC for problem determination and service procedures. Warranty service can only be performed by a Ambient, LLC. The original dated bill of sale must be presented upon request as proof of purchase to Ambient, LLC. Your Ambient, LLC warranty covers all defects in material a
