ページ1に含まれる内容の要旨
HL200 MIXER
TECHNICAL MANUAL
SPECIFICATION SHEET
INSTALLATION INSTRUCTIONS
OPERATION INSTRUCTIONS
CLEANING INSTRUCTIONS
MAINTENANCE INSTRUCTIONS
TROUBLE SHOOTING INSTRUCTIONS
WIRING DIAGRAMS
CATALOG OF REPLACEMENT PARTS
SMARTPARTS™ USER GUIDE
RECOMMENDED SPARE PARTS LIST
ページ2に含まれる内容の要旨
Need other Hobart Services? • Warranty Registration • Delivery and Installation • Preventive Maintenance • Hobart Service Contracts • Extended Warranty Contracts • Parts and Accessories • Specialty Programs • Water Treatment Programs HL200 Mixer Technical Manual Page 2 of 111
ページ3に含まれる内容の要旨
® LEGACY HL200 MIXER Item # _____________________________________ Quantity ___________________________________ C.S.I. Section 11400 ® LEGACY 701 S Ridge Avenue, Troy, OH 45374 HL200 MIXER 1-888-4HOBART • www.hobartcorp.com STANDARD FEATURES MODELS 1 ❑ HL200 – 20-Quart All Purpose Mixer ■ Heavy-Duty ⁄2 H.P. Motor ❑ HL200C – 20-Quart All Purpose Mixer with ■ Gear Transmission Maximum Security Correctional Package ■ Three Fixed Speeds Plus Stir Speed ■ Shift-on-the-Fly™ Controls ■ Patented sof
ページ4に含まれる内容の要旨
® LEGACY 701 S Ridge Avenue, Troy, OH 45374 HL200 MIXER 1-888-4HOBART • www.hobartcorp.com HL200 MIXER CAPACITY CHART SOLUTIONS/BENEFITS 1 Recommended Maximum Capacities - dough capaci- ⁄2 H.P. Motor ties based on 70°F. water and 12% flour moisture. Durability ■ Heavy-duty to meet the most demanding AGITATORS operations PRODUCT SUITABLE FOR HL200 Gear Transmission OPERATION Durability, Reliability CAPACITY OF BOWL (QTS. LIQUID) 20 ■ Ensures consistent performance and minimum Egg
ページ5に含まれる内容の要旨
® LEGACY 701 S Ridge Avenue, Troy, OH 45374 HL200 MIXER 1-888-4HOBART • www.hobartcorp.com SPECIFICATIONS MOTOR: BOWL LIFT: 1 ⁄2 H.P. high torque motor. Ergonomic style, hand crank operated, self-locking in top and bottom position. 100-120/50/60/1 8.0 Amps 200-240/50/60/1 5.0 Amps FINISH: Metallic Gray Hybrid Powder Coat finish. ELECTRICAL: 100-120/50/60/1, 200-240/50/60/1 – UL Listed. ATTACHMENT HUB: Comes with front-mounted Hobart standard #12 CONTROLS: taper attachment hub for use wit
ページ6に含まれる内容の要旨
® LEGACY 701 S Ridge Avenue, Troy, OH 45374 HL200 MIXER 1-888-4HOBART • www.hobartcorp.com SPECIFICATIONS ELECTRICAL SPECIFICATIONS: 100-120/50/60/1, WARRANTY: Unit has full one-year warranty on 200-240/50/60/1 – UL Listed. parts, labor and mileage against manufacturer’s defects. Service contracts are available. WEIGHT: 189 lbs. net; 204 lbs. domestic shipping. DETAILS AND DIMENSIONS As continued product improvement is a policy of Hobart, specifications are subject to change without notice. ®
ページ7に含まれる内容の要旨
Models HL120 ML-134296 ML-134459 HL200 ML-134331 ML-134458 HL200 ML-134289 ML-134457 HL 200 HL200 ML- 134455 ML-134450 PRIOR ML’S COVERED IN TH IS MANUAL PRIOR ML’S COVERED IN THIS CATALOG HL200 ML-134308 HL200 ML-134308 HL200 ML-134450 INSTRUCTION MANUAL 701S.RIDGEAVENUETROY,OHIO 45374-0001 937-332-3000·WWW.HOBARTCORP.COM F34922 Rev. C (Sept .2008) F34922 Rev. D (Nov. 2008) HL200 Mixer Technical Manual Page 7 of 111
ページ8に含まれる内容の要旨
TABLE OF CONTENTS GENERAL ............................................................................................... 3 INSTALLATION............................................................................................... 3 Unpacking .............................................................................................3 Location ................................................................................................3 Electrical Connections ......................
ページ9に含まれる内容の要旨
Installation, Operation and Care of TM Legacy 12 & 20-Quart Mixers SAVE THESE INSTRUCTIONS GENERAL The Legacy 12-quart mixer is a bench-type mixer which features a SmartTimer™, a manual bowl lift and a #12 attachment hub as standard equipment. The Legacy 20-quart mixer is a bench-type mixer which features a SmartTimer™, a manual bowl lift and a #12 attachment hub as standard equipment. With the use of special agitators, a 12 quart bowl may be used on the HL200 mixer. A variety of att
ページ10に含まれる内容の要旨
ELECTRICAL CONNECTIONS (Cord Connected Mixers) The electrical cord on this machine is equipped with a three-pronged grounding plug which must be connected to a properly grounded receptacle. If the ELECTRICAL CONNECTIONS (Cord Connected Mixers) receptacle is not the proper grounding type, contact an electrician. Do Not remove the WARNING: THE ELECTRICAL CORD ON THIS MACHINE IS EQUIPPED WITH A THREE- grounding prong from the plug. PRONGED GROUNDING PLUG WHICH MUST BE CONNECTED TO A PROPERLY
ページ11に含まれる内容の要旨
OPERATION OPERATION Moving agitator in bowl. Keep hands, clothing, and utensils out of bowl WARNING: MOVING AGITATOR IN BOWL. KEEP HANDS, CLOTHING, AND UTENSILS OUT operation. Do Not use without interlocked guard. OF BOWL WHILE IN OPERATION. DO NOT USE WITHOUT INTERLOCKED GUARD. TM The Legacy mixer is equipped with SmartTimer controls. Refer to Fig. 1 for operating parts and OPERATION section for their functions. The bowl guard wire cage must be in closed position or the mixer will not oper
ページ12に含まれる内容の要旨
Standard Controls Models HL120/HL200 (With Three Mix Speeds Plus Stir Speed) DISPLAY MIXING TIME STOPS MIXER TIME SELECTOR STARTS MIXER Fig. 2 SPEED SELECTOR HL120/HL200 Mixer Speeds STIR (Slow) The lowest speed is for incorporating ingredients. SPEED 1 (Low) This speed is for heavy mixtures such as pizza dough, heavy batters and potatoes. SPEED 2 (Medium) This speed is for mixing cake batters, mashing potatoes and developing bread dough. SPEED 3 (High) This speed is for incorporating air int
ページ13に含まれる内容の要旨
Recipe Timer (Optional) Models HL120/HL200 (With Three Mix Speeds Plus Stir Speed) Fig. 15 The SmartPlus2™ recipe timer has two operating modes, Standard (STD) and RECIPE. Standard Mode Operates exactly as the standard controls utilizing continuous and timed mixing. Recipe Mode Use mode buttons to switch mixer operation between recipe and standard timed operation. Up to 4 recipes can be stored in memory Each recipe can contain 5 steps Each step can be programmed to operate with the foll
ページ14に含まれる内容の要旨
BOWL PLACEMENT The bowl must be installed before the agitator is installed. To install the bowl, lower the bowl support and position bowl so the alignment pins on the left side of the bowl support fit in the holes in the bowl tab. (Fig. 3) Place the slotted tab on bowl into the lower part of the pin. Swing the bowl into the mix position on bowl support. (Fig. 4) Fig. 3 AGITATOR Fig. 4 To install an agitator, the bowl must be on the bowl support. To Install 1. Lower the bowl. 2. Open the bowl gu
ページ15に含まれる内容の要旨
PREPARE FOR MIXING 1. Place the mixing bowl on the bowl support. 2. Pour ingredients into the bowl. 3. Swing the bowl back to the mix position. 4. Place the agitator inside the bowl, and then attach it to the agitator shaft (Fig. 6). 5. Lift bowl support. 6. Correctly close the bowl guard wire cage. 7. The mixer is now ready for mixing. (See TIMER OPERATION.) Fig. 6 STANDARD TIMER OPERATION Using the Count-Up Mode (Continuous Mixing) 1. Turn the SPEED dial to select a mix speed (the SPEED settin
ページ16に含まれる内容の要旨
Using the Count-Down Mode (Timed Mixing) 1. Turn the SPEED dial to select a mix speed. a. If the count-up mode was used for the previous batch, the desired time needs to be entered. b. If the count-down mode was used for the previous batch, the previous time will be displayed. If a different time is needed, turn the TIME selector to the desired time in 10 second increments. 2. Press the START button to begin mixing; the timer starts counting down from the set time. a. To stop the mixer at any
ページ17に含まれる内容の要旨
RECIPE TIMER OPERATION Recipe Timer Notes If pause is selected as a mix speed, the mixer START button must be pressed to advance to the next recipe step after the pause time has expired. If pause has been selected, the bowl guard can be opened and the time will continue to count down. The recipe step can be interrupted and then resumed by pressing the STOP button and then the START button. NOTE: If PAUSE has been selected, the STOP button is disabled. The recipe can be terminated by stoppin
ページ18に含まれる内容の要旨
View Recipe When the mixer is in RECIPE mode, you can view the step settings of any recipe. 1. Press the SELECT/SAVE button. A. Display will alternate between speed and time. B. The LED of the step being displayed will flash. 2. Use the arrow buttons to view the next step. 3. Use the Recipe selector to view other recipes. 4. Press PGM button to return to the RECIPE mode. NOTE: If the mixer is performing a recipe, the recipe will continue to operate in normal recipe mode sequence. PROGRAMMING REC
ページ19に含まれる内容の要旨
NOTES: If a value has been assigned for a step number, that LED will be lit. The LED for the selected step will blink. If the default value is still assigned to a step, the LED will not be lit. When programming, the Recipe and Time Selectors are disabled. SPEED SETTINGS TIME SETTINGS SPd 1 (DEFAULT) 00:00 – 15:00 minutes (10 second increments) SPd 2 End (default) SPd 3 Stir PAUS (pause – no mixing) 5. Use arrows to select step number (1 – 5). 6. Press SPEED. All characters will bli
ページ20に含まれる内容の要旨
UNLOADING 1. Open the bowl guard wire cage assembly. 2. Lower bowl support. 3. Remove the agitator from the agitator shaft. 4. Slightly lift the bowl off the pin (right side), pull bowl to the front and remove from the bowl support (left side). WIRE CAGE The bowl guard wire cage can be rotated out of the way to add ingredients or to access the bowl and agitator. Note how the plastic carriers allow the wire cage to ride around the circumference of the planetary drip cup. Open the bowl guard wir
