ページ1に含まれる内容の要旨
BIPAC-7100S / 7100
ADSL Modem/Router
Quick Start Guide
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Billion BIPAC-7100S/7100 ADSL Modem/Router For more detailed instructions on configuring and using the ADSL Modem/ Router, please refer to the on-line manual. Package Contents Billion BIPAC-7100S/7100 ADSL Modem/Router One CD-ROM containing the driver and online manual One Quick Start Guide One RJ-11 ADSL/telephone cable One CAT-5 straight LAN cable One power adapter (12VDC, 1A) Do not use the BIPAC-7100S / 7100 in high humid
ページ4に含まれる内容の要旨
Quick Start Guide The Front Panel LEDs 7100S 7 4 1 5 2 LED Meaning 1 PWR Lit green when power adapter is connected. 2 SYS When flash, it indicates that the device is working properly. 4 LNK Lit green when the LAN link is connected. 5 COL Flashes green when collision happens When lit, it indicates that the ADSL (Line) port is connected to the 7 ADSL DSLAM and
ページ5に含まれる内容の要旨
Billion BIPAC-7100S/7100 ADSL Modem/Router 7100 6 2 3 5 LED Meaning 2 PWR Lit green when power adapter is connected. 3 SYS When lit, it indicates that the device is working properly. LAN1 Lit green when the LAN1 link is connected. LAN2 Lit gre
ページ6に含まれる内容の要旨
Quick Start Guide The Rear Ports 7100S 5 3 1 4 2 Port Meaning Power Switch 1 Power ON/OFF switch PWR 2 Connect the supplied power adapter to this jack. Connect the supplied crossover cable to this port when LAN 3 connecting to a NIC (Network Interface card) in PC. (connector Connect an UTP Ethernet cable to this po
ページ7に含まれる内容の要旨
Billion BIPAC-7100S/7100 ADSL Modem/Router Connecting Your ADSL Router Through Ethernet Port 1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone (LINE) network. 2. Power on the device. 3. Make sure the PWR and SYS LEDs are lit steadily and that the relevant LAN LED is lit. 4. Follow the “Configuring the Network Properties on a PC” section on page 8 to modify the network settings. 7100S 7100 5
ページ8に含まれる内容の要旨
Quick Start Guide Configuring PC in Windows XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network Connections 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window, click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6. Click OK to finish the configuration.
ページ9に含まれる内容の要旨
Billion BIPAC-7100S/7100 ADSL Modem/Router Configuring PC in Windows 2000 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up Connections. 2. Double-click Local Area Connection. 3. In the Local Area Connection Status window click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatical
ページ10に含まれる内容の要旨
Quick Start Guide Configuring PC in Windows 98/Me 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP/IP -> NE2000 Compatible, or the name of your Network Interface Card (NIC) in your PC. 3. Select the Obtain an IP address automatically radio button. 4. Then select the DNS Configuration tab. 5. Select the Disable DNS radio button and click OK to finish the configuration. 8
ページ11に含まれる内容の要旨
Billion BIPAC-7100S/7100 ADSL Modem/Router Configuring PC in Windows NT4.0 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties. 3. Select the Obtain an IP address from a DHCP server radio button and click OK. 9
ページ12に含まれる内容の要旨
Quick Start Guide Configuring Your ADSL Modem/Router To configure this device, you must have IE 5.0 / Netscape 4.5 or above installed Verifying Your Local Network Connection with the Device To see if this ADSL Router is visible on the local network, go to Start / Run. In the Run dialog box, type “ping 192.168.1.254” then press OK. A command prompt window will pop out. If your ping is successful which means your local network is able to reach to the device, th
ページ13に含まれる内容の要旨
Billion BIPAC-7100S/7100 ADSL Modem/Router Connecting to the Router 1. Open the web browser and type http://192.168.1.254 in the browser’s address box. This number is the default IP address for this router. Press Enter. 2. A username and password window will appear. The default username and password are admin and password. Press OK to proceed. Product Support and Contact Information Most problems can be solved by referring to the Trou
