ページ1に含まれる内容の要旨
Electronic user’s guide released subject to "Nokia User’s Guides Terms and Conditions, 7th June, 1998"
Nokia 20 GSM Connectivity Terminal
User’s Guide for modem use
9353276
Issue 1
ページ2に含まれる内容の要旨
DECLARATION OF CONFORMITY We, NOKIA MOBILE PHONES Ltd declare under our sole responsibility that the product TME-2 is in conformity with the provisions of the following Council Directive: 1999/5/EC. Copyright © Nokia Mobile Phones Ltd 2001. All rights reserved. Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited. Nokia and Nokia Connecting People are registered trademarks of Nok
ページ3に含まれる内容の要旨
Table of contents For your safety .....................4 Nokia 20 GSM Connectivity Terminal accessories ...........18 Introduction ..........................5 System requirements ................7 Troubleshooting ..................19 Network services .......................7 Communications software ......8 Care and maintenance .......21 Getting started .....................9 Important safety Setting up the terminal ...........9 information .........................22 AT commands ..............
ページ4に含まれる内容の要旨
1. For your safety Read these simple guidelines. Breaking the rules may be dangerous or illegal. Further detailed information is given in this manual. INTERFERENCE All wireless equipment may get interference which could affect performance. DO NOT USE IN HOSPITALS Follow any regulations or rules. Do not use near medical equipment. USE SENSIBLY Do not touch the antenna unnecessarily. USE QUALIFIED SERVICE Only qualified service personnel must install or repair equipment. ACCESSORIES Use only app
ページ5に含まれる内容の要旨
2. Introduction Congratulations on your purchase of the Nokia 20 GSM Connectivity Terminal. It plugs into compatible PCs or other devices with an RS-232 data cable. Using the Nokia 20 GSM Connectivity Terminal and appropriate software, you can send and receive e-mail, data files, faxes, and access the Internet from your PC. The Nokia 20 GSM Connectivity Terminal can also be used in conjunction with other fixed GSM solutions and various data solutions. It is an ideal solution for unmanned co
ページ6に含まれる内容の要旨
Sales package contents: GSM terminal cradle power supply with 2 cords data cable CD-ROM installation kit (screws) 6 ©2001 Nokia Mobile Phones. All rights reserved. Introduction Introduction
ページ7に含まれる内容の要旨
System requirements The Nokia 20 GSM Connectivity Terminal requires: an RS-232 data connector AT Hayes command support Network services The Nokia 20 GSM Connectivity Terminal is approved for use in the GSM 900 and GSM 1800 networks and in the GSM 900/1800 dual band network. The Nokia 20 GSM Connectivity Terminal supports High Speed Circuit Switched Data (HSCSD), which enables data transmission rates of up to 43.2 kbps. HSCSD makes downloading large files faster and more convenient. So
ページ8に含まれる内容の要旨
Communications software To connect to the Internet, to send and receive e-mail or faxes, or to transmit data from your PC, you need the appropriate data and fax communications software. You can use the Nokia 20 GSM Connectivity Terminal with most commercially available communications applications, such as Microsoft Exchange, Microsoft Outlook and Netscape Navigator. For example, Windows 95/98/2000/ NT 4.0 include several communications applications, such as Dial-Up Networking and HyperTermi
ページ9に含まれる内容の要旨
3. Getting started Setting up the terminal To use the Nokia 20 GSM Connectivity Terminal for the first time, proceed as follows: 1 Install the SIM card. 2 Mount the terminal on the cradle. 3 Place the terminal in a proper location. 4 Connect the data cable to the terminal and to a PC or other compatible device. Connect the power supply to the terminal and to an AC wall outlet. 5 Enter the PIN code if your SIM card requires it (see page 12). Warning! To avoid damage to the SIM card, do not in
ページ10に含まれる内容の要旨
Installing the SIM card Keep all miniature SIM cards out small children’s reach. The SIM card and its contacts can easily be damaged by scratches or bending, so be careful when handling, inserting or removing the card. Insert the SIM card ensuring that the bevelled corner is on the bottom right and the golden contact area is facing downwards. Mounting the terminal Mount the terminal on the cradle using the three screws supplied in the sales package. Turn the antenna into an upright positi
ページ11に含まれる内容の要旨
Placing the terminal Caution: In order to comply with RF exposure requirements, install the terminal so that a minimum distance of 20 cm can be maintained between the antenna and all persons. If you use an external antenna, install the antenna so that a minimum distance of 20 cm can be maintained between the antenna and all persons, with antenna gain not exceeding 3 dBi. Place the terminal in a proper location, for example on the desk far enough from your PC. It is also possible to install t
ページ12に含まれる内容の要旨
Connecting the cables 1 Connect the data cable from the terminal to a PC or other compatible device. Use only a cable supplied by Nokia. 2 Connect the power cord from the power supply to the terminal. 3 Connect the power supply to an AC wall outlet. Entering the PIN code The PIN (Personal Identification Number) code protects your SIM card against unauthorised use. It is usually supplied with the SIM card. If the SIM card requires a PIN code, you must enter it to be able to use the terminal.
ページ13に含まれる内容の要旨
If you do not get an OK response, refer to section ”Troubleshooting”. To enter the PIN code, type at+cpin="PIN" where PIN is your PIN code. Press ENTER. See ”Figure 2. HyperTerminal connection” for details. If entering the PIN code fails three times successively, the code is blocked. Refer to section ”Troubleshooting”. Changing the PIN code To protect your SIM card against unauthorised use, it is good to change the factory setting PIN code supplied by your service provider. The PIN code can
ページ14に含まれる内容の要旨
Figure 1. Port settings 14 ©2001 Nokia Mobile Phones. All rights reserved. Getting started Getting started
ページ15に含まれる内容の要旨
Figure 2. HyperTerminal connection AT commands Other AT commands, which are used to control the terminal, can be found in the List of AT Commands on the CD-ROM. The Nokia 20 GSM Connectivity Terminal supports ITU-T V.25ter, ETS GSM 07.05 and ETS GSM 07.07 commands. 15 ©2001 Nokia Mobile Phones. All rights reserved. Getting started Getting started
ページ16に含まれる内容の要旨
4. Light indicators Light indicators 1 and 2 are not in use. Light indicators 3, 4 and 5 indicate the state of the terminal. Refer to Table 1. Table 1. Nokia 20 light indicators 345Description - - - Power is off. Blinking - - Power is on. The terminal is attempting to connect to the telephone network. On --In service. On - On Call in progress. On Blinking - There is an incoming call. - Blinking - Enter the PIN code. Blinking Blinking - Enter the PUK code. On On On The terminal has received
ページ17に含まれる内容の要旨
345Description On On Blinking The terminal has no space for new SMS messages. The oldest message is automatically deleted. - Blinking Blinking Install the SIM card. Blinking Blinking Blinking An error has occurred. Contact service personnel. 17 ©2001 Nokia Mobile Phones. All rights reserved. Light indicators Light indicators
ページ18に含まれる内容の要旨
5. Nokia 20 GSM Connectivity Terminal accessories For details and availability of Nokia 20 GSM Connectivity Terminal accessories, contact your local dealer. Power supply (ACW-3): Supplied with the terminal. Data package: Features an RS-232 data cable and an AT command list CD-ROM. Antenna adapter: Allows an external antenna with a standard FME connector to be connected to the terminal. Configurator Software: For a more advanced configuration of the terminal. 18 ©2001 Nokia Mobile Ph
ページ19に含まれる内容の要旨
6. Troubleshooting First things to check 1 Check that the data cable is firmly connected to the terminal and to the PC or other compatible device. 2 Check that the power supply is firmly connected to the terminal and to an AC wall outlet. 3 Check that the antenna is firmly connected to the terminal. 4 Disconnect the power supply from the AC wall outlet before you check that the SIM card is installed properly. Reception is poor If there are problems with the reception, for example interruptions
ページ20に含まれる内容の要旨
For example, response +csq: 31, 99 means that the signal strength is excellent. If the signal is weaker than -95 dBm (the parameter is 9 or less), move the terminal to another location. If the terminal does not receive a stronger signal, contact your service provider. Anexternal antenna may improve the reception. The PIN code is blocked If entering the PIN code fails three times successively, the code is blocked. You can unblock it by entering your PUK (Personal Unblocking Key) code. T
