ページ1に含まれる内容の要旨
iP42 IB in USA English version
Print color : Black text on white paper
Size of manual: 178mmW x 178mmH
Mar 1,2010
Model iP42
The Home System
® ®
For Your iPhone or iPod
Questions? Visit www.ihomeaudio.com
ページ2に含まれる内容の要旨
Table of Contents Quick Start .........................................................................................................................................................................1 Controls and Indicators ....................................................................................................................................................2 iP42 Display ................................................................................................................
ページ3に含まれる内容の要旨
iP42 Quick start 2: inserts 3: time sync 1: power RESET TEST � Dock your iPhone � Press the Time set/sync button on back of the unit. � “SYNC OK” will flash on the display, indicating sync attempt � Day and date will appear and you Attach AC adaptor cable to Select the dock insert for your iPhone ® will hear a beep when sync is DC jack on back of the iP42 and or iPod model from the table below complete. plug the other end into a and place insert in dock. � If sync fails, attempt again o
ページ4に含まれる内容の要旨
Controls and Indicators Top Panel Dock EQ Button Preset Buttons 1-6 Volume Wheel Set Wheel Alarm Reset / Power Button Play/Pause Button Radio/aux Button Alarm 2 Button Sleep Button Alarm 1 Button Snooze/Dimmer Button Rear Panel Time Set/ Sync Button DST switch Time Zone Button line-in time set/ sync time zone DC 7.5V 2A DST AC Adaptor Jack aux line-in Jack -1 +1 FM antenna iP42 Display NOTE: AM/PM indicators will not appear Time Display when clock is set to 24 hour displa
ページ5に含まれる内容の要旨
Updated Mar 2 Installing/Replacing the iP42 Backup Batteries The iP42 uses “AA” LR06 batteries (pre-installed) for backup battery system to provide continuous alarm operation and clock settings in the event of a power failure. If the Battery Low Icon located on the right of the display is flashing, it is time to replace the backup batteries. Please make sure the AC adaptor is connected, otherwise all settings may be lost during battery replacement. 1. Open the battery compartment cover loc
ページ6に含まれる内容の要旨
Setting Up the iP42 Connect iP42 to Power Source Plug the AC adaptor cable into the AC Adaptor Jack and the other end into a standard 120V AC wall socket. Adaptor must be plugged in to operate unit. The iP42 does not operate on batteries (a battery back up system maintains clock settings during power failures). This unit is a preset clock: the clock is preset at the factory. It’s simple to match the Time Zone setting to your location (US only). 1. Depending on your location and whether or no
ページ7に含まれる内容の要旨
Using the iP42 Alarms Using the Alarms iP42 has a dual alarm system so you can set two separate alarms to different alarm times, wake-to sources and frequencies (daily, weekdays or weekend). Setting the Alarms 1. Press and hold the or Button until the alarm time flashes on the lower part of the display. Turn the Set Wheel to set the alarm time. Remember to set the correct AM or PM time. 2. Press the Alarm Button again to confirm the desired alarm time and then turn the Set Wheel
ページ8に含まれる内容の要旨
Using the iP42 Alarms Sure Alarm The iP42 has a sure alarm feature. If backup batteries are installed, the buzzer alarm will still sound in the event of a power failure. Listening to iPhone/iPod, Radio Charging your iPhone/Pod Note: Please make sure you are using the correct insert for your iPhone/iPod and that it is properly docked into the iP42. Failure to do so may damage your iPhone/iPod. While an iPhone/iPod is docked in the unit and the unit is connected to AC power, it recharges until f
ページ9に含まれる内容の要旨
Updated Mar 2 Listening to Aux device Using the aux line-in Jack You can play any iPod or other MP3 player or portable audio device through the iP42 via the aux line-in Jack. 1. Plug one end of a standard stereo audio patch cord (not included) into the headphone or line-out jack on your device and the other end of the patch cord into the iP42 aux line-in Jack located on the back of the unit. 2. Press the Radio Button until “aux” appears in the lower part of the display. 3. Turn on and play your
ページ10に含まれる内容の要旨
A Consumer Guide to Product Safety When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1. Water and Moisture – The unit should no
ページ11に含まれる内容の要旨
Troubleshooting Symptom Possible Problem Solution iP42 does not turn on AC adaptor isn't plugged into a working wall Plug the AC adaptor into a working wall socket and plug the socket or not plugged into the power supply connector into the supply jack on the unit jack on back of the unit iP42 doesn’t respond If unit is plugged in and doesn't respond, try resetting the unit by iP42 requires a reset following these steps: a) remove iPhone/iPod from dock b) unplug unit from power source c) rem
ページ12に含まれる内容の要旨
Troubleshooting Symptom Possible Problem Solution Sound is distorted Volume level is set too high Decrease the volume If the iPhone/iPod original sound source (MP3) is old or of poor quality, Sound source is distorted distortion and noise are easily noticed with high-power speakers. Try a different audio source such as a music CD through the line-in jack. If you are using an external sound source like older generation of iPod or iPod Shuffle, try reducing the output volume on the device its
ページ13に含まれる内容の要旨
Limited 1 Year Warranty Information iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 1 Year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased. Should this fail to resolve the matter and service still
