ページ1に含まれる内容の要旨
X-Micro EPIC MP3 Player
MP3 Music Player+Digital Voice Recorder+USB Flash Drive
User Manual
V1.2
ページ2に含まれる内容の要旨
Table of Contents 1. Introduction 1.1 About X-Micro EPIC MP3 Player-----------------------------------------------------------------------2 1.2 Features ------------------------------------------------------------------------------------------------------2 2. Illustration of function keys and LCD display----------------------------------------------------------------3-4 3. Quick start --------------------------------------------------------------------------------------------------------
ページ3に含まれる内容の要旨
1. Introduction 1.1 About X-Micro EPIC MP3 Player X-Micro EPIC MP3 Player is the brand new multi-function MP3/WMA player from our EPIC series. Compared with the single-function MP3 Player, X-MICRO EPIC MP3 PLAYER owns not only the stylish outlook with an EQ built in LCD, but also a high quality digital voice recording function. We successfully combined well-known USB flash drive, popular MP3/WMA player and delicately designed digital voice recorder in one stick. With two AAA batteri
ページ4に含まれる内容の要旨
-CE and FCC certificate of approval. 2. Illustration of function keys and LCD display LED USB JACK S1 S4 S3 SW1 S2 S1: Switch Controller (Power On / Multi-function Switch) SW1: Key Lock S3: Record Button (Write Protect / Button Lock) (Record / Repeat Section settings) S4: Mode Key S2: Volume Control 3
ページ5に含まれる内容の要旨
Repeat Play: Single / All Play Mode: Play / Pause / Stop Player function: WMA,MP3,DVR Repeat Section Battery Status Key Lock Selection and play time Record Mode Equalizer Settings 4
ページ6に含まれる内容の要旨
3. Quick Start MP3/WMA Playback Steps: 1. Press 3 seconds on Switch Controller to turn on the player. 2. LED will blink when you press Switch Controller. After blinking, LCD will show HELLO . 3. If there are already MP3 or WMA files in the Flash Memory, the LCD will show 01 0:00 , and the LED will light up. To begin the playback of MP3 or WMA file, press again Switch Controller . Record Operation Steps: 1. Press 3 seconds on Switch Controller to turn on the player. 2. Press Re
ページ7に含まれる内容の要旨
4. Function & Operation 4.1. MP3/WMA Playback (1) Press Switch Controller to turn on the player. LED will blink. The display will show ｢HELLO ｣as Figure 4.1.1. Figure 4.1.1 (2) The player will automatically read the content of the Flash Memory. If there are already MP3 or WMA files in the Flash Memory, the display will show as Figure 4.1.2. Figure 4.1.2 (3) Press Switch Controller to start playing the first selection. The music for
ページ8に含まれる内容の要旨
(8) If no operations occurred for 60 seconds in stop mode, the player will turn off automatically. 4.2. Recording Operation (1) Press Record Button to start recording. LED will keep blinking, and the ”REC” icon will flash, too. Elapsed recording time will be shown in the display. (Figure 4.2.1) Figure 4.2.1 (2) To stop record, press Record Button again. LED will light off, and the beginning of the playing time will be indicated in the display. ”DVR” icon tu
ページ9に含まれる内容の要旨
4.3. Selection / Fast Forward / Fast Backward (1) To select during playback, slide Switch Controller upward once for the previous file, and downward for the next one. Playback will start from the beginning of the selection. (Figure 4.3.1) Figure 4.3.1 (2) To select in stop mode, slide Switch Controller until the desired selection shows up in the display. Press Switch controller to start play. (3) To locate a particular point in a selection, Slide Switch Co
ページ10に含まれる内容の要旨
Figure 4.4.2 4.5. Volume Control (1) During playback, slide Volume Controller to the left to turn down and right to turn up the volume which will be shown in the display. (Figure 4.5.1) -- Sound Level: 0 ~ 63 (2) To continuously increase or decrease the volume, slide Figure 4.5.1 Volume Controller to the right / left and hold. To stop volume control, stop sliding Volume C
ページ11に含まれる内容の要旨
4.7. Menu Operation (1) In stop status, press Mode Key to enter Menu selection which contains 3 functions: (i) Equalizer Settings (EQ) (ii) Playback Settings (REP) (iii) File Deletion (DEL) Figure 4.7.1 To select, slide Switch Controller up and down and the function will change cyclically as follows: EQ REP DEL EQ. Press Switch Controller again to confirm the selection. (Figure 4.7.1) (2) EQ Menu: Under Equalizer Settings, slide Switch Controller
ページ12に含まれる内容の要旨
Figure 4.7.4 (4) DEL Menu(Figure 4.7.5): Under file deletion, slide Switch Controller to select among the deletion of a single file or all files with the following cycle: DEL ONE DEL ALL DEL ONE Figure 4.7.5 Press Switch Controller again to confirm the setting. (Figure 4.7.6) Figure 4.7.6 (
ページ13に含まれる内容の要旨
(5) Remove the unit from the USB port of PC to return the player back to stop mode, and the removable disk will st disappear from My Computer. Playing time of the 1 file will be displayed in the display. (Figure 4.8.3) When file copy / delete through PC is finished, make sure Figure 4.8.3 the USB operation has come to a complete stop and the display appears “--PC--“ before unplugging the player from PC’s USB port. Otherwise it may result in damages to the files in the Flash Memory.
ページ14に含まれる内容の要旨
5. How to install driver 5.1 Windows 98/98SE Installation (1) Plug X-Micro EPIC MP3 Player into USB port. System will detect one new hardware and search for proper driver to install. (2) Choose the first recommend to install. (3) Choose setting up from CD ROM. 13
ページ15に含まれる内容の要旨
(4) To execute installation by press “Next”. (5) Press “Finish” to complete installation. 14
ページ16に含まれる内容の要旨
5.2 Windows ME / Windows 2000 / XP Installation For these three operating systems, NO Driver is needed, because Windows has built-in driver to support USB removable disk. Simply plug X-Micro EPIC MP3 Player into the USB port and it will be recognized by the system. System will setup X-Micro EPIC MP3 Player automatically without any further installation of driver. Once installation is completed, you will see a “Removable Disk” drive in My Computer. 6. Remove X-Micro EPIC MP3 Player
ページ17に含まれる内容の要旨
7. Linux 2.4.0 + / Mac 8.6 + Installation Again, No Driver is required for these two operating systems. Simply plug the X-Micro EPIC MP3 Player into the USB port and the system will automatically find X-Micro EPIC MP3 Player. After using X-Micro EPIC MP3 Player, you could unplug X-Micro EPIC MP3 Player from the USB port directly once the LED stops blinking, then its icon would disappear automatically. For Linux user, please refer to Important Notices. Important Notices (i) In OS W
ページ18に含まれる内容の要旨
No part of this document may be reproduced or transmitted in any form by any means without the express written permission of the manufacturer. All brand names and product names used in this document are trademarks or registered trademarks of their respective holders. 17
ページ19に含まれる内容の要旨
www.x-micro.com 18
