ページ1に含まれる内容の要旨
Attaching the Ferrite Core
You must attach the ferrite core before using the M-10MX.
If you connect the M-10MX’s coaxial jack to your digital device, you must attach the included ferrite
core.
This is for the purpose of preventing electromagnetic noise; do not remove it.
fig.ferraite-1
Ferrite Core
1. Attach the ferrite core to the coaxial cable.
* You must attach it near the M-10MX.
fig.ferraite-2
2. Wrap the coaxial cable around the ferrite
core; one turn is enough.
ページ2に含まれる内容の要旨
Panel Descriptions OUTPUT Jacks (TRS phone/RCA pin jacks) POWER Switch These jacks output the mixed signal. This turns the power on/off. SENS Knobs OVERLOAD Indicator Both phone jacks and RCA pin jacks are provided, and you Set this switch to “DC IN” if you’re These knobs adjust the input sensitivity, This indicator will light if the mixed signal is too loud. can connect to both jacks and send the output to separate using the AC adaptor, or to allowing you to set the input level so that I
ページ3に含まれる内容の要旨
Block Diagram Connections VOLUME Stereo Mini Example 1) Mixing and Switching Sound for DTMP INPUT 1/2 PHONES VOLUME Plug-in power * “DTMP” (Desk-Top Media Production) refers to setups that let you use your computer in new ways to enjoy SENS Stereo Mini compatible CHANNEL PHONES video and music. VOLUME SENS INPUT 1/2 1/4" Phone MAIN VOLUME Mixer Sound Module Sound Module SENS TRS Impedance Balanced CHANNEL Keyboard VOLUME SENS MAIN OUTPUT INPUT 3/4 1/4" Phone OVER RCA LOAD If you’re u
ページ4に含まれる内容の要旨
Example 2) Editing Sound for Video Example 3) Audio Equipment Mixing Using a variety of audio sources for video post-production Portable Audio Player MD Player * Post-production often involves the process of adding a variety of audio sources such as music, sound effects, and narration to previously recorded video. CD Player Video Cassette Recorder Camcorder Portable Audio Player CD Player Powered Monitor Dynamic Mic L R R L L R L R Portable Recorder Images Included AC adaptor R L R L L
ページ5に含まれる内容の要旨
Operation Installing Batteries Normally, the supplied AC power adaptor is used to power the M-10MX. Once the connections have been completed (p. 6– p. 8), turn on power to your various devices in the However, you can also install commercially available AA batteries and operate on battery power. order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices. 1. Turn the POWER switch “OFF
ページ6に含まれる内容の要旨
Troubleshooting Main Specifications M-10MX: 10 channel (5 stereo) Mixer Cause Response Number of Channels 10 in 2 out The sound from the device connected to an INPUT jack or OUTPUT jack is not AD Conversion Sample Rate: 44.1/48.0/96.0 kHz, Signal Processing: 24 bits loud enough 96.0 kHz: 20 Hz to 40 kHz (+1/-2 dB) Could you be using a cable that has a built-in re- Use a cable that does not contain a built-in resis- Frequency Response 48.0 kHz: 20 Hz to 22 kHz (+1/-2 dB) sistor? tor. 44.1 kHz: 2
ページ7に含まれる内容の要旨
USING THE UNIT SAFELY 014 106 • Protect the unit from strong impact. • Never climb on top of, nor place heavy objects on (Do not drop it!) the unit. ................................................................................................ ................................................................................................ 015 107c • Do not force the unit’s power-supply cord to share • Never handle the AC adaptor or its plugs with wet The symbol alerts the user to import
ページ8に含まれる内容の要旨
Information When you need repair service, call your nearest EDIROL/Roland Service Center or authorized EDIROL/Roland distributor in your country as shown below. IMPORTANT NOTES HONG KONG NICARAGUA HUNGARY CENTRAL/LATIN MIDDLE EAST 291a Parsons Music Ltd. Bansbach Instrumentos Roland East Europe Ltd. AMERICA In addition to the items listed under “USING THE UNIT SAFELY” on page 13–14, please read and observe the following: 8th Floor, Railway Plaza, 39 Musicales Nicaragua Warehouse Area ‘DEPO’ Pf.
