ページ1に含まれる内容の要旨
FNS-5000B
Network Attached Storage
2-Bay SATA HDD w/ Gigabit Ethernet
User Manual
Ver. 1.00 - 0608
ページ2に含まれる内容の要旨
FOREWORD Thank you for choosing LevelOne products! This user manual provides detailed instructions of using FNS-5000B. Please read carefully and start to enjoy the powerful functions of FNS- 5000B LIMITED WARRANTY In no event shall the liability of Digital Data Communications Co., Ltd. (LevelOne) exceed the price paid for the product from direct, indirect, special, incidental, or consequential software, or its documentation. LevelOne makes no warranty or representation, expressed, i
ページ3に含まれる内容の要旨
Table of Contents 1. Overview........................................................................................................................ 5 1.1. Introduction................................................................................................................. 5 1.2. Package Contents ...................................................................................................... 5 1.3. Hardware Illustration .....................................................
ページ4に含まれる内容の要旨
3.5.3. USB Printer ........................................................................................................ 51 3.6. User Management ....................................................................................... 53 3.6.1. Users.................................................................................................................. 53 3.6.2. User Groups....................................................................................................... 55 3.
ページ5に含まれる内容の要旨
1. Overview 1.1. Introduction Thank you for choosing FNS-5000B NAS. This product has the following key features: Support two SATA HDD with embedded RAID function to enhance data security Enables P2P BitTorrent client to download files automatically Enrich your digital multimedia life and manage personal albums and multimedia files easily Built-in Web server, FTP server, File server and Printer server functionality Remote back provides remote disk backup to another storage device
ページ6に含まれる内容の要旨
1.3. Hardware Illustration One Touch Power Button Copy Button LED Indicators: USB, Status, USB 2.0 HDD1, HDD2, LAN, and Power K-Lock Power Security Slot Connector Reset Button LAN Port USB 2.0 x 2 6
ページ7に含まれる内容の要旨
2. Installation 2.1. Install Hard Disk 1. Unfasten the four screws in the front of FNS- 5000B and remove the front panel. 2. Loosen the screws on the disk trays and take out the disk trays. 3. Install a hard disk on each tray. Make sure the disk holes match the holes at the base of the disk tray and lock the disk with four screws. 7
ページ8に含まれる内容の要旨
4. Insert the disk trays to FNS-5000B. Push the disk trays to the end. Fasten the screws on the trays. When two disks are installed, make sure HDD1 is installed on top of HDD2. 5. Cover FNS-5000B with the front panel and fasten the four screws. 8
ページ9に含まれる内容の要旨
2.2. Hard Disk Recommendation List The following HDD models are verified by LevelOne that are compatible with FNS-5000B. It is recommended to use the disk models listed here. Other HDD brands that are not tested by LevelOne may or may not work properly with FNS-5000B. For more updated compatible hard disk information, please visit LevelOne website at www.level1.com. LevelOne disclaims any responsibility for product damage/ malfunction or data loss/ recovery due to misuse or improper
ページ10に含まれる内容の要旨
2.3. Setting Up Please check your network environment and select the appropriate installation method before installing FNS-5000B. 2.3.1. Office/ Home Connect FNS-5000B and PC to the same hub/ switch/ router. 2.3.2. Individual Connect FNS-5000B directly to your PC by a network cable. 10
ページ11に含まれる内容の要旨
When you have verified your network environment, please follow the steps below to install FNS-5000B. Network cable 1 USB cable 2 3 1. Connect FNS-5000B to hub/ switch/ router or PC according your network environment. 2. Connect USB printer to FNS-5000B and enable USB printer service*. 3. Connect the power. 4. Press the power button of FNS-5000B to turn on the server. * Optional step. You can skip this step if you are not using printer service. 11
ページ12に含まれる内容の要旨
2.4. LED / System Status FNS-5000B provides LED indicators for you to indicate system status and information easily. When FNS-5000B is turned on, please check the following items to make sure system status is normal. Note that the following LED information is applicable only when you have properly installed HDD1 and/or HDD2, and connected FNS-5000B to the network and power. 1 2 3 4 5 6 USB Status Status HDD1 HDD2 LAN Power LED System starting up System has started
ページ13に含まれる内容の要旨
LED Display / System Status LED LED Display & System Status Blue: You can press the copy button to copy data. Blink in blue: Copying data USB Status Blink in blue once: Detecting or removing USB device Green: System is normal Blink in green: Hard disk not detected Blink in red: Bad blocks are found in hard disk (any volume) Blink in green for 5 seconds, blink in green and red Status alternatively: Hard disk not initialized Blink in green and red alternatively: Disk capacity is alm
ページ14に含まれる内容の要旨
2.5. Configure Software Settings After checking system status, please follow the steps below to configure software settings of FNS-5000B. The configuration procedure of Windows and Mac users are different. Please select the appropriate procedure according to your OS. 2.5.1. Windows® Users Insert FNS-5000B CD-ROM in your PC. Wait for a few seconds until the following screen shows up. Then start to configure the software settings of FNS-5000B. 1. Install Quick Install Wizar
ページ15に含まれる内容の要旨
2. After installed, run Quick Install Wizard, the following screen will be shown. Select name on the list and click Configure Windows workgroup joined by server Name of server IP address of server System version Configure the View the Map Refresh the Help Exit the server name, details of network search results program time and selected drive for the within the network settings server server network Enter the default user name and password. Default user
ページ16に含まれる内容の要旨
When you have entered quick configuration page, enter related information to complete the settings. Click OK to save changes. Note: If you select to enter IP address manually, please make sure your PC and FNS-5000B are in the same LAN. If you are not sure about the network settings, please contact your network administrator or ISP. Note: All files and directories on FNS-5000B will be created using Unicode encoding. If your FTP client or PC does not support Unicode, ® e.
ページ17に含まれる内容の要旨
FNS-5000B provides several default share folders for data sharing and access. To map the share folders on FNS-5000B as your drive, check the option “Map drive” and follow the steps below to proceed. a. For example, to map the folder Public as your drive, select the folder and click Map Network Drive. Note: The share folders Qdownload, Qmultimedia, Qusb, and Qweb are system default network share of FNS-5000B for the use of Download Station, Multimedia Station, USB auto-copy and Web
ページ18に含まれる内容の要旨
c. Upon successful connection, you can start to use the share folder on FNS-5000B. You can access these folders by opening My Computer. 3. Quick Install Wizard will appear when all configurations are completed. Double-click on the name of FNS-5000B on the list to enter administration page. 18
ページ19に含まれる内容の要旨
4. When the administration page of FNS-5000B is shown, you can start to use the services. If you have any questions during web administration, please click the help button on the top right hand corner of the page. To modify system settings, click Administration. Enter the user name and password to login. Default user name: administrator Password: admin Note: It is recommended to use Internet Explorer 6.0 or above to access FNS-5000B. FNS-5000B supports Internet Explorer 6.0 or
ページ20に含まれる内容の要旨
2.5.2. Mac Users FNS-5000B provides two methods for Mac users to connect to FNS-5000B. You can select A. Connect FNS-5000B by Mac directly or B. Connect FNS-5000B by the network. A. Connect FNS-5000B by Mac directly 1. Please go to Network settings and select Using DHCP. Then connect FNS-5000B to your Mac via a cable. 2. Open a web browser and enter the default IP address of FNS-5000B to login the system. Default IP of FNS-5000B: http://169.254.100.100:6000 Note: Please
