ページ1に含まれる内容の要旨
Electronic user's guide released subject to "Nokia User's Guides Terms and Conditions,
7th June, 1998"
User’s Guide for the Wireless
Headset (HDW-2)
9355260
Issue 1
ページ2に含まれる内容の要旨
DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product HDW-2 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found from http://www.nokia.com/phones/declaration_of_conformity/. Copyright © 2002-2003 Nokia. All rights reserved. Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permi
ページ3に含まれる内容の要旨
Contents 1. Introduction.......................................................................................................5 Bluetooth wireless technology ................................................................................................................ 5 Chargers and batteries............................................................................................................................... 6 The card in the sales package.............................................
ページ4に含まれる内容の要旨
Disconnecting the headset from the phone ......................................................................................18 Reconnecting the paired headset to your phone..........................................................................18 Using the headset with several phones ..............................................................................................19 Using the headset with several paired phones.....................................................................
ページ5に含まれる内容の要旨
1. Introduction The Wireless Headset HDW-2 can be connected without wires to a compatible phone that supports Bluetooth wireless technology. This gives you complete freedom for making and receiving calls while on the move or at the office. Read this user’s guide carefully before using the headset. More detailed information is provided by your phone's own user's guide. Do not use this Wireless Headset (HDW-2) user’s guide in place of your phone’s user's guide, which provides important safety
ページ6に含まれる内容の要旨
The headset provides the best performance when it is used with a compatible Nokia phone. If you use the headset with a phone produced by another manufacturer, all the functions described in this user’s guide may not be available. In some countries, there may be restrictions on using Bluetooth devices. Check with your local authorities. ■ Chargers and batteries Check the model number of any charger before using it with this device. The Wireless Headset HDW-2 is intended for use with the follo
ページ7に含まれる内容の要旨
2. Getting started ■ Overview The headset contains the following parts: 1 - Power key: Switches the headset on and off. 2 - Answer/end key: Answers or ends the call. This key can also be used for voice dialling, redialling and switching an active call between the headset and the phone. 3 - Indicator light: Displays the current status of the headset. 4 - Volume up: Increases the earphone volume during a call. 5 - Volume down: Decreases the earphone volume during a call. 6 - Earphone: R
ページ8に含まれる内容の要旨
■ Charging the battery The headset has a rechargeable NiMH battery. If you need to replace the battery, you can purchase a new one from your nearest authorised dealer. To charge the battery: 1. Connect the charger cable to the headset. For a list of compatible chargers, see Chargers and batteries on page 6. 2. Connect the charger to an AC wall outlet. The red indicator light is displayed during charging. Charging the battery fully takes between 1 and 2 hours, depending on the charger. 3. Whe
ページ9に含まれる内容の要旨
When the battery charge falls low The fully charged battery has power for up to 3 hours of talk time and up to 60 hours of standby time. (In standby mode, the headset is switched on but no call is in progress.) When the battery is running out of power, the headset beeps. Charge the battery as described above. ■ Changing the battery When the operating time is noticeably shorter than normal, it is time to buy a new battery. To change the battery: 1. Open the battery door by gently sliding it
ページ10に含まれる内容の要旨
2. Remove the battery by pulling the strap (2). 3. Detach the battery from the connector (3). 4. Attach the new battery to the connector. 5. Place the connector in the space reserved for it and set the battery into its place (4). Copyright © 2003 Nokia. All rights reserved. 10
ページ11に含まれる内容の要旨
6. Close the battery door and make sure it is properly locked in place (5). ■ Switching the headset on or off To switch on: Press and hold the power key for 2 seconds. The headset beeps and the green indicator light starts blinking. The blinking continues until the headset is connected to your phone, within 5 minutes. If the headset cannot be connected to your phone during this time, the headset is switched off. To switch off: Press and hold the power key for 2 seconds. The headset beeps and
ページ12に含まれる内容の要旨
The phone searches for all Bluetooth devices within about 10 meters and displays them as a list. 5. Select the headset from the list. 6. Enter the passkey to associate ("pair") and connect the headset to your phone. The passkey is marked on the card that is provided in the sales package of the headset. Once you have entered the passkey, your phone becomes the default phone for the headset, if the headset has not been previously paired with another phone. See also Using the headset with seve
ページ13に含まれる内容の要旨
To change the orientation of the earpiece, detach the earloop from the body part as shown in the figure below, and place it back according to the L/R markings on the earloop. L stands for the left ear, and R stands for the right ear. When, for example, the R marking is visible, you can wear the headset on your right ear. Copyright © 2003 Nokia. All rights reserved. 13 Getting started
ページ14に含まれる内容の要旨
■ Placing the headset on the ear Slide the earloop gently behind your ear as shown in the figure below: ■ Troubleshooting If you cannot connect the headset to your phone, proceed as follows: Make sure that the headset is switched on and paired with your phone. Make sure that the Bluetooth feature is activated on your phone. Check that the headset is within a maximum of 10 meters of your phone and that there are no obstructions, such as walls, or other electronic devices between the he
ページ15に含まれる内容の要旨
3. Using the headset Before using the headset, make sure that: The headset is paired and connected to your phone. For instructions on pairing the headset, see Taking the headset into use for the first time on page 11. For instructions on connecting the headset, see Connecting the paired headset to your phone below. The phone’s Bluetooth feature is on; see your phone’s user’s guide The headset is switched on; see Switching the headset on or off on page 11 The headset is within a maxim
ページ16に含まれる内容の要旨
permission. In Nokia phones this can be done by changing your paired devices settings in the Bluetooth menu. For more information on disconnecting the headset from your phone, see page 18. ■ Making a call When the headset is connected to your phone, make the call by using your phone in the normal way. ■ Voice dialling When no call is in progress, press and hold the answer/end key until you hear a tone that indicates that you can say the desired name ("voice tag"). Say the voice tag. The pho
ページ17に含まれる内容の要旨
When you receive a call, you hear a ringing tone selected on your phone also through the headset. ■ Ending a call Press the answer/end key to end the currently active call. You can also end the call by using your phone in the normal way. ■ Rejecting a call If you do not want to answer a call, briefly press the answer/end key twice. ■ Automatic answer If the Automatic answer function is set on in your phone, the phone automatically answers the incoming call after one ring. ■ Adjusting the earp
ページ18に含まれる内容の要旨
Press and hold the answer/end key. OR: Use the respective function in your phone. To switch the call from phone to headset: Press and hold the answer/end key. OR: Use the respective function in your phone. ■ Disconnecting the headset from the phone You can disconnect the headset from your phone when, for example, you want to use another Bluetooth device with your phone. The headset can be disconnected in the following ways: Switch off the headset. OR: Disconnect the headset in the
ページ19に含まれる内容の要旨
■ Using the headset with several phones Before the headset can be used with your phone, the phone has to be paired with the headset. The headset can be paired with up to 8 phones but connected to only one phone at a time. Using the headset with several paired phones The phone that was first paired with the headset is called the "default phone". The phone that was last used with the headset is called the "last used phone". If the headset is switched on within 10 metres of several paired phones
ページ20に含まれる内容の要旨
■ Resetting the headset You can reset the headset to the original settings to, for example, change the default user of the headset. When you reset the headset, all of its settings, including pairing information, are cleared. To reset the headset: Press and hold the power key together with the volume up key for 10 seconds. After the headset has been reset, the headset beeps twice and the red and green indicator lights alternate for several seconds. Copyright © 2003 Nokia. All rights reserved
