ページ12に含まれる内容の要旨
3 Chapter 3 Basic setting Methods for registering new devices using the Bluetooth Utility shall now be described. A Bluetooth mouse shall be connected and set up using [Bluetooth Settings] as an example. [Bluetooth Settings] provides two set-up methods: "Express Mode" and "Custom Mode." • Express Mode [Bluetooth Settings] will automatically detect and register services. If several services (profiles) are supported by the device the service that has been set to the highest priority
ページ13に含まれる内容の要旨
The same result can be achieved by right-clicking on the Bluetooth icon in the task tray and selecting [Bluetooth Settings] from the menu that appears. The [Bluetooth Settings] window below will appear when other devices have already been registered. Please click the [New Connection] button to open the [Add New Connection Wizard] window. If no devices have been registered yet, please proceed directly to "Detecting Bluetooth Devices." 3.1.2 Detecting Bluetooth devices The [Add Ne
ページ14に含まれる内容の要旨
2. Confirm that [Express Mode] has been selected in the [Add New Connection Wizard (Welcome to the Add New Connection Wizard)] window, and click on the [Next] button. Searching for Bluetooth devices will start. When the device has been detected, the name and address of the device will appear in the [Add New Connection Wizard (Select Device)] window. 14
ページ15に含まれる内容の要旨
Note If no device is found, please confirm that the device has been made connectable via Bluetooth, and click on the [Update] button. A further device search will be performed. 3.1.3 Detecting services 1. Select the device name from [Device List] and click on the [Next] button. Bluetooth device detection will commence. 15
ページ16に含まれる内容の要旨
Note If several services (profiles) are supported by the device, the service that has been set to the highest priority shall be automatically selected and set up in Express Mode. Please use Custom Mode if you wish to select desired services manually. When a service has been detected, a window prompting you to enter the Bluetooth passkey (PIN code) may appear. Please enter the passkey and click on the [OK] button. If you have not entered your Bluetooth passkey after a certain amo
ページ17に含まれる内容の要旨
Note When the settings information has been registered, a window prompting you to enter your Bluetooth passkey (PIN code) may appear. Please enter your passkey and click on the [OK] button. If you have not entered your Bluetooth passkey after a certain amount of time has passed, the connection process will be cancelled for security reasons. Please perform the passkey entry process again. The [Add New Connection Wizard (Connection Name Setup)] window will appear if a service has b
ページ18に含まれる内容の要旨
Note If you wish to change the icon, please click on the [Change Icon] button and select your preferred icon from the list that appears. 18
ページ19に含まれる内容の要旨
3.1.4 Registering settings information The [Add New Connection Wizard (Completing the Add New Connection Wizard)] window will appear. 1. Click on the [Finish] button The [Bluetooth Settings] window will appear. The icons of the registered devices will appear, and the devices will be ready to use. 19
ページ20に含まれる内容の要旨
3.2 Custom Mode Set-up 3.2.1 Starting Bluetooth Settings 1. Click [Start] [All Programs] [Bluetooth] [Bluetooth Settings]. (Under Windows 2000, click [Start] →[Programs] →[Bluetooth] →[Bluetooth Settings].) Note The same result can be achieved by right-clicking on the Bluetooth icon in the task tray and selecting [Bluetooth Settings] from the menu that appears. The [Bluetooth Settings] window below will appear when other devices have already been registered. Please click t
ページ1に含まれる内容の要旨
Class 1 / Class 2
Bluetooth V2.0 USB Adapter
BT-510U/BT-520U
User’s Guide
ページ2に含まれる内容の要旨
Copyright Copyright (C) 2006 PLANET Technology Corp. All rights reserved. The products and programs described in this User’s Manual are licensed products of PLANET Technology, This User’s Manual contains proprietary information protected by copyright, and this User’s Manual and all accompanying hardware, software, and documentation are copyrighted. No part of this User’s Manual may be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable for
ページ3に含まれる内容の要旨
Trademarks The PLANET logo is a trademark of PLANET Technology. This documentation may refer to numerous hardware and software products by their trade names. In most, if not all cases, these designations are claimed as trademarks or registered trademarks by their respective companies. WEEE regulation To avoid the potential effects on the environment and human health as a result of the presence of hazardous substances in electrical and electronic equipment, end users of electrical and e
ページ4に含まれる内容の要旨
Table of Contents CHAPTER1 INTRODUCTION.....................................................................................................6 1.1 FEATURES..............................................................................................................................6 1.2 PACKET CONTENT .................................................................................................................7 1.3 SUPPORTED PROFILES .........................................................
ページ5に含まれる内容の要旨
5.4.1 Clients and servers........................................................................................................134 5.4.2 Creating a virtual COM port.........................................................................................135 5.4.3 Deleting a virtual COM port.........................................................................................137 CHAPTER 6 FAQ................................................................................................
ページ6に含まれる内容の要旨
1 Chapter1 Introduction The BT-510U/520U is designed to connect USB port of a desktop or laptop PC, and allows the computer to build a short-range wireless connection to other Bluetooth devices like cellular phones, PDAs, and computers. Since the transmission medium of BT-510U/520U is air, PLANET also enhances both connection protection and data security mechanism to the product which helps people share and access trigger information. Compliant with Bluetooth specification Version 2.0 +
ページ7に含まれる内容の要旨
1.2 Packet Content The following items should be included: • 1 * Bluetooth V2.0 USB Adapter • 1 * CD-ROM (includes Driver, Utility, Manual) • 1 * Quick Installation Guide If any of the above items are damaged or missing, please contact your dealer immediately. 1.3 Supported profiles Windows 98SE/ME This Bluetooth Stack for Windows supports the following profiles. Please note that profiles HSP, PAN, BIP, A2DP, AVRCP and GAVDP are supported by Windows XP and Windows 2000 only. (a) DU
ページ8に含まれる内容の要旨
Japanese Norwegian Spanish Swedish The following languages are supported by Windows 2000/XP and Windows Server 2003 only. Dutch Korean Simplified Chinese Traditional Chinese Russian Finnish Portuguese (Brazil) 1.5 Supported operating systems The Bluetooth Stack for Windows supports the following operating systems. Windows 98 Second Edition Windows ME Windows 2000 Professional (Service Pack 3 or above) Windows XP Professional (Service Pack 1 or above) Windows XP Home (S
ページ9に含まれる内容の要旨
modem; I will select from a list". Otherwise, the system may freeze during the modem detection. If the manual for your Bluetooth device does not specify a modem driver, then please select "Standard 33600bps modem". (f) Before connecting or disconnecting a Bluetooth headset, please exit any voice or sound-related applications (e.g. Windows Messenger, Windows Media Player). The audio input and output may not be switched properly if those applications are running. This same precaution i
ページ10に含まれる内容の要旨
2 Chapter 2 Setup for Windows 98SE/ME/2000/XP/2003 Installing Bluetooth software for Windows 1. Insert the Drivers and User’s Manual CD into CD-ROM drive to initiate the autorun program. Once completed, a menu screen will appear. 2. Install the Bluetooth software by click the “Bluetooth Software“ hyperlink of the menu screen to activate the installation for the application program. If the menu screen doesn’t appear, please start the installation as follows. • Click “Start“ button. •
ページ11に含まれる内容の要旨
5. When the installation is completed, please click on the "Yes" to restart your system. 11
