ページ1に含まれる内容の要旨
Internet Telephony Gateway
VIP-050 / VIP-450
User’s Manual
Rev 2.0
ページ2に含まれる内容の要旨
SIP Voice Gateway User’s Manual FCC Notice This equipment has been tested and found to comply with the limits for a Class A digital de- vice, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable pro- tection against harmful interference when the equipment is operated in a commercial environ- ment. This equipment generates, uses, and can radiate radio frequency energy and, if not in- stalled in accordance with the instruction manual, may cause harmful interference
ページ3に含まれる内容の要旨
SIP Voice Gateway User’s Manual How to Use This Manual This manual was designed for the technical and non-technical users of PLANET Internet telephony gateway VIP-050 / VIP-450. It contains information about the functions of VIP and instructions for its installation, basic configuration and operation in related chapters, and introduces more advanced command line interface, firmware upgrade and appendix information. Read this section carefully for important information about the manual’
ページ4に含まれる内容の要旨
SIP Voice Gateway User’s Manual Important Safety Instructions Before plugging VIP into an electrical outlet, carefully read all the installation instructions in Chapter 2. For your own safety and the safety of your equipment, always take the following precautions: • Follow instructions and warnings in the documentation. • Never push any object through the fan vent or other openings in the equipment. Such action may produce a short circuit, causing fire, electric shock, or equipment dama
ページ5に含まれる内容の要旨
SIP Voice Gateway User’s Manual Light Emitting Diode LED Private Branch Exchange PBX PSTN Public Switched Telephone Network RTP Real-Time Transport SIP Session Initialization Protocol TCID Telephony Channel Identifier TFTP Trivial File Transfer Protocol TIM Telephony Interface Modules TNV Telephone Network Voltage UDP User Datagram Protocol UTP Unshielded Twisted Pair Voice Activity Detection VAD Wide Area Network WAN Notation Conventions Throughout this guide, different
ページ6に含まれる内容の要旨
SIP Voice Gateway User’s Manual Table of Contents Chapter 1 Overview 1 1.1 Features 1 1.2 Networking Protocols 1 1.3 Package Contents 2 1.4 Front Panel 2 1.5 Rear Panel 3 Chapter 2 Installing VIP 5 2.1 Network Requirements 5 2.2 Installing VIP 5 2.3 Connecting to the telephony devices 5 2.4 Connecting to the Network 5 2.5 Providing Power to VIP 6 2.6 Assigning IP address to VIP 6 Chapter 3 VIP Concepts 7 3.1 How VIP Operates 7 3.2 ATPM 7 3.3 Destination 7 3.4 Hunt Group 8
ページ7に含まれる内容の要旨
SIP Voice Gateway User’s Manual 4.2.5 Channel Parameters 23 4.2.6 Network Connection 24 4.3 Configure System Settings 28 4.3.1 IP Settings 30 4.3.2 SIP Parameters 30 Chapter 5 Troubleshooting Tips 34 Chapter 6 Command Line Interface 35 6.1 Connection through Serial Port 35 6.2 Connection through Telnet 35 6.3 Command Help 36 6.4 Designating IP Address 36 6.5 Designating Port Number 36 6.6 Command Reference 37 6.7 Utility Commands 38 6.8 Network Commands 39 6.9 Configuration Manag
ページ8に含まれる内容の要旨
SIP Voice Gateway User’s Manual B.2 Download Mode Commands 74 Appendix C Factory Default Settings 75 Preface viii
ページ9に含まれる内容の要旨
VIP User’s Manual Chapter 1 Overview This chapter illustrates an overview of PLANET Internet Telephony Gateway Family – VIP-050 / VIP-450 and a detailed product description of features and capabilities. 1.1 Features Via growth of Internet technology, Internet telephony service plays and turns into a cost-effective and highly reliable substitution system of the old-time traditional PBX system. PLANET VoIP (Voice over IP) system – VIP-050 / VIP-450 offer toll quality voice and real-t
ページ10に含まれる内容の要旨
SIP Voice Gateway User’s Manual 1.3 Package Contents The contents of your product should contain the following items: VIP-050 l 2-slot Internet Telephony Gateway l Power cord l 9-pin straight through RS-232 cable l Quick Installation Guide l User’s Manual CD l Rack mount Accessories VIP-450 l 4-port Internet Telephony Gateway l Power cord l 9-pin straight through RS-232 cable l Quick Installation Guide l User’s Manual CD 1.4 Front Panel The front panel of VIP contains
ページ11に含まれる内容の要旨
SIP Voice Gateway User’s Manual PWR Green On Power is supplied to the gateway. SYSTEM Green Blinking The system is running. (Heartbeat LED) LAN ACT Green On Data is presented on LAN. 100M Green On The gateway is connected to LAN at 100Mb/s. Off The gateway is connected to LAN at 10Mb/s. LNK Green On The gateway is connected to LAN. COL Green On Data collision is occurring on the network connection. Slot A/B Green Off The line is idle. Channels On The line is being used. 1
ページ12に含まれる内容の要旨
SIP Voice Gateway User’s Manual Slot A Slot B SLOT A SLOT B 90~240VA ELITE-FXO ELITE-FXS 1 2 1 2 3 4 50~60H VIP-050 Rear Panel VIP-450 Rear Panel Note: For VIP-050, three modules available, VIP-FXS, VIP-FXO and VIP-E&M. Modules are not included, please consult your local dealer for the information of the modules. Overview 4
ページ13に含まれる内容の要旨
VIP User’s Guide Chapter 2 Installing VIP This chapter gives information on how to install VIP. 2.1 Network Requirements For VIP successfully operate in your network, your network must meet the following requirements: 1. A working 10/100 Base-T Ethernet. VIP connects to Internet via an Ethernet LAN. 2. IP network that supports gateway, and subnet mask. You’ll need one static IP address to as- sign VIP. 2.2 Installing VIP VIP can be used in a desktop configuration. Ensure that VIP is
ページ14に含まれる内容の要旨
VIP User’s Manual 2.5 Providing Power to VIP To provide AC power to VIP complete the following steps: 1. Turn the power switch on the rear panel of VIP to the off position. 2. Connect one end of the power cord that came with VIP to the power receptacle on the rear panel. 3. Connect the other end of the power cord to an AC power outlet. 4. Turn the power switch on. VIP will perform power on self-test. After completing the self-test, the SYSTEM LED blinks continuously and the TIM indicato
ページ15に含まれる内容の要旨
VIP User’s Manual Chapter 3 VIP Concepts VIP enables the transmission of voice and fax traffic over any IP network by digitizing voice and fax signals, encapsulating the information within IP packets, and then sending the packets across the IP network 3.1 How VIP Operates 1. The TIM inside VIP digitizes analog voice signals at 8 Kbps. 2. VIP system software handles the: Capture of telephone number presented as DTMF tones. Mapping the telephone number to the IP address of remote VI
ページ16に含まれる内容の要旨
VIP User’s Manual 3.4 Hunt Group Instead of directly mapping a phone number to a destination, the ATPM first maps the phone num- ber to a group of destinations known as a Hunt Group. A hunt group is a group of destinations that are equivalent. For example, the customer support group of a company might have 20 peo- ple who can handle support calls. Access to customer support is through a single phone number but the next available support person is actually connected upon each incoming call.
ページ17に含まれる内容の要旨
SIP Voice Gateway User’s Manual Hunt Group Table The hunt group table maps a hunt group to a list of destinations. Hunt group sample Group id Type #Members Member ids ---------------------------------------------------------------------------- 1 2 1 1 3 2 1 2 5 2 1 4 11 2 1 11 Destination Table The destination ta
ページ18に含まれる内容の要旨
ページ19に含まれる内容の要旨
VIP User’s Manual Chapter 4 Configuring VIP from a Web Browser This chapter explains procedures for configuring VIP from the web browser. 4.1 Http setting mode This section describes the processes for setting up Internet Telephony Gateway once it has been in- stalled. Microsoft Explorer version 4 or higher, or Navigator version 4.5 or higher can be used in this section to view and change parameters. PC Setup In order to configure VIP, PC needs to have TCP/IP protocol and a compatib
ページ20に含まれる内容の要旨
VIP User’s Manual 5. On the IP Address table, enter values as follows: • Specify an IP address set ON. • IP Address: 192.168.0.2 • Subnet Mask: 255.255.255.0 Restart your PC and Start your WEB browser. 6. In the Address box, enter the following: http://192.168.0.1 (default IP address of the Voice Gateway) 7. Press enter to confirm and you should find the screen below. 8. The User Name is administrator (all lower case). Password is 123. Both administrator and 123 are default str
