ページ1に含まれる内容の要旨
User’s Guide for the Wireless Headset
(HDW-3)
9233095
Issue 1
ページ2に含まれる内容の要旨
DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product HDW-3 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found from http://www.nokia.com/phones/declaration_of_conformity/. Copyright © 2004 Nokia. All rights reserved. Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission
ページ3に含まれる内容の要旨
Contents 1. Introduction...................................................................................................... 5 Bluetooth wireless technology ............................................................................................................... 5 Chargers and batteries.............................................................................................................................. 6 The card in the sales package...............................................
ページ4に含まれる内容の要旨
Disconnecting the headset from the phone ..................................................................................... 20 Reconnecting the paired headset to your phone......................................................................... 20 Using the headset with several phones ............................................................................................. 21 Using the headset with several paired phones.....................................................................
ページ5に含まれる内容の要旨
1. Introduction The Wireless Headset HDW-3 can be connected without wires to a compatible phone that supports Bluetooth wireless technology. This gives you complete freedom for making and receiving calls while on the move or at the office. Read this user’s guide carefully before using the headset. More detailed information is provided by your phone's own user's guide. Do not use this Wireless Headset (HDW-3) user’s guide in place of the user’s guide for your phone, which provides important
ページ6に含まれる内容の要旨
The headset provides the best performance when it is used with a compatible Nokia phone. If you use the headset with a phone produced by another manufacturer, all the functions described in this user’s guide may not be available. In some countries, there may be restrictions on using Bluetooth devices. Check with your local authorities. ■ Chargers and batteries Check the model number of any charger before use with this device. The Wireless Headset HDW-3 is intended for use with the following
ページ7に含まれる内容の要旨
2. Getting started ■ Overview The headset contains the following parts: 1 - Power key: Switches the headset on and off. 2 - Answer/end key: Answers or ends the call. This key can also be used for voice dialling, redialling and switching an active call between the headset and the phone. 3 - Indicator light: Displays the current status of the headset. 4 - Volume up: Increases the earphone volume during a call. Copyright ©2004 Nokia Mobile Phones. All rights reserved. 7
ページ8に含まれる内容の要旨
5 - Volume down: Decreases the earphone volume during a call. 6 - Earphone: Relays the caller’s voice. 7 - Microphone: Picks up your voice. 8 - Charger connector 9 - Battery door 10 - Earloop ■ Charging the battery The headset has a rechargeable NiMH battery (part number 0774291). If you need to replace the battery, you can purchase a new one from your nearest authorised dealer. To charge the battery: Copyright ©2004 Nokia Mobile Phones. All rights reserved. 8
ページ9に含まれる内容の要旨
1. Connect the charger cable to the headset. For a list of compatible chargers, see Chargers and batteries on page 6. 2. Connect the charger to an AC wall outlet. The red indicator light is displayed during charging. Charging the battery fully takes between 1 and 2 hours, depending on the charger. 3. When the battery is fully charged, the green indicator light is shown. Disconnect the charger from the AC wall outlet and the headset. When the battery charge falls low The fully charged battery
ページ10に含まれる内容の要旨
■ Changing the battery When the operating time is noticeably shorter than normal, it is time to buy a new battery. To change the battery: 1. Open the battery door by gently sliding it backwards (1). 2. Remove the battery by pulling the strap (2). Copyright ©2004 Nokia Mobile Phones. All rights reserved. 10
ページ11に含まれる内容の要旨
3. Detach the battery from the connector (3). 4. Attach the new battery to the connector. 5. Place the connector in the space reserved for it and set the battery into its place (4). 6. Close the battery door and make sure it is properly locked in place (5). Copyright ©2004 Nokia Mobile Phones. All rights reserved. 11
ページ12に含まれる内容の要旨
■ Switching the headset on or off To switch on: Press and hold the power key for 2 seconds. The headset beeps and the green indicator light starts blinking fast. The blinking continues slower after the headset is connected to your phone. To switch off: Press and hold the power key for 2 seconds. The headset beeps and the red indicator light is displayed briefly. ■ Taking the headset into use for the first time 1. Make sure that your phone is switched on. 2. Switch on the headset. 3. Enter t
ページ13に含まれる内容の要旨
Once you have entered the passcode, your phone becomes the default phone for the headset, if the headset has not been previously paired with another phone. See also Using the headset with several phones on page 21. The headset beeps and appears in the phone menu where you can view the Bluetooth devices that are currently paired with your phone. 7. Start using the headset (see page 17). ■ Adjusting the headset to your ear The headset can be worn on either ear. For optimal fit, choose between
ページ14に含まれる内容の要旨
the earloop. L stands for the left ear, and R stands for the right ear. When, for example, the R marking is visible, you can wear the headset on your right ear. Copyright ©2004 Nokia Mobile Phones. All rights reserved. 14
ページ15に含まれる内容の要旨
■ Placing the headset on the ear Slide the earloop gently behind your ear as shown in the figure below: ■ Troubleshooting If you cannot connect the headset to your phone, proceed as follows: Make sure that the headset is switched on and paired with your phone. Make sure that the Bluetooth feature is activated on your phone. Check that the headset is within a maximum of 10 meters of your phone and that there are no obstructions, such as walls, or other electronic devices between the head
ページ16に含まれる内容の要旨
If the headset does not respond to your actions, remove the battery for a short while. Copyright ©2004 Nokia Mobile Phones. All rights reserved. 16
ページ17に含まれる内容の要旨
3. Using the headset Before using the headset, make sure that: The headset is paired and connected to your phone. For instructions on pairing the headset, see Taking the headset into use for the first time on page 12. For instructions on connecting the headset, see Connecting the paired headset to your phone below. The Bluetooth feature is activated in your phone. See the user’s guide of your phone. The headset is switched on. See Switching the headset on or off on page 12. The head
ページ18に含まれる内容の要旨
Note that switching on the headset creates the connection automatically only if you have set the phone to accept Bluetooth connection requests without your permission. In Nokia phones this can be done by changing your paired devices settings in the Bluetooth menu. For more information on disconnecting the headset from your phone, see page 20. ■ Making a call When the headset is connected to your phone, make the call by using your phone in the normal way. ■ Voice dialling When no call is in
ページ19に含まれる内容の要旨
You can also answer the call by using your phone in the normal way. When you receive a call, you hear a ringing tone selected on your phone also through the headset. ■ Ending a call Press the answer/end key to end the currently active call. You can also end the call by using your phone in the normal way. ■ Rejecting a call If you do not want to answer a call, briefly press the answer/end key twice. ■ Automatic answer If the Automatic answer function is set on in your phone, the phone automatic
ページ20に含まれる内容の要旨
To switch the call from headset to phone: Press and hold the answer/end key. OR: Use the respective function in your phone. To switch the call from phone to headset: Press and hold the answer/end key. OR: Use the respective function in your phone. ■ Disconnecting the headset from the phone You can disconnect the headset from your phone when, for example, you want to use another Bluetooth device with your phone. The headset can be disconnected in the following ways: Switch off the hea
