ページ1に含まれる内容の要旨
Internal
Fax Modem 56K
Quick Installation Guide
M73-APO02-300
ページ2に含まれる内容の要旨
FCC REGULATORY STATEMENTS FCC Part 68 Registration This device complies with FCC Part 68 rules, and the use of this device is subject to the following restrictions: 1. The FCC has established rules which permit this device to be directly connected to the telephone network. Standardized jacks are used for these connections. This equipment should not be used on party lines or coin phones. 2. If this device is malfunctioning, it may also be causing harm to the telephone network; t
ページ3に含まれる内容の要旨
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interf
ページ4に含まれる内容の要旨
physical and software settings of this device. If the users are desired to use this device on those networks, they should contact the vendor or supplier first. - 3 -
ページ5に含まれる内容の要旨
Table of Contents HARDWARE INSTALLATION ................... 1 SOFTWARE INSTALLATION..................... 2 WINDOWS 95/98/98SE INSTALLATION................................................ 2 WINDOWS 2000 INSTALLATION ..................... 4 WINDOWS ME INSTALLATION........................ 7 WINDOWS XP INSTALLATION ........................ 9 WINDOWS NT INSTALLATION ...................... 15 -
ページ6に含まれる内容の要旨
HARDWARE INSTALLATION Precautions: Please be sure you take adequate anti-static precautions when handling this product. The simplest way to achieve this is; before you begin and every minute or so during the hardware installation touch a non-painted surface of the computer’s chassis. 1. Before installing the device, make sure the computer is turned off. 2. Remove the expansion slot cover from the computer. 3. Carefully slide the PCI modem card into an available PCI slot, push i
ページ7に含まれる内容の要旨
SOFTWARE INSTALLATION Windows 95/98/98SE Installation 1. Restart the computer system after the modem is correctly plugged into the PCI slot of your computer. Windows will automatically detect the device. Click Next. 2. When the following dialog box appears, insert the device driver compact disc into your CD-ROM drive and click Next. 3. Select Specify a location and press Browse to choose the folder driver/win95/98 in your CD-ROM drive. Then click Next. -2-
ページ8に含まれる内容の要旨
4. Click Next to continue. 5. When the following figure appears, click Finish. The Installation program will continue. -3-
ページ9に含まれる内容の要旨
6. The program will proceed automatically. Click Finish to complete software installation. Windows 2000 Installation 1. Restart the computer system after the modem is correctly plugged into the PCI slot of your computer. Windows will automatically detect the device. Click Next. -4-
ページ10に含まれる内容の要旨
2. Follow the on-screen instructions to proceed. (Click Next to continue.) 3. Select Specify a Location. Click the Next button. 4. Load the Compact Disc that contains the device driver into your CD-ROM drive. Click Browse and select the proper file -5-
ページ11に含まれる内容の要旨
location with the disc drive followed by Driver\Win2K. 5. Follow the on-screen instructions to proceed. (Click Next to continue.) 6. When Windows prompt you to continue the installation. Select Yes. -6-
ページ12に含まれる内容の要旨
7. Click Finish to complete the software installation. Windows ME Installation 1. Restart the computer system after the modem is correctly plugged into the PCI slot of your computer. Windows will automatically detect the device. Select Specify the location of the driver [Advanced], (Click Next to continue.). -7-
ページ13に含まれる内容の要旨
2. Load the Compact Disc that contains the device driver into your CD-ROM drive. Click Browse and select the proper file location with the disc drive followed by Driver\Millennium. 3. Follow the on-screen instructions to proceed. (Click Next to continue.) -8-
ページ14に含まれる内容の要旨
4. Click Finish to complete the software installation. Windows XP Installation Restart the computer system after the modem is properly plugged into the PCI slot of your computer. Windows XP will automatically detect the device. 1. Go to Control Panel System Hardware Device Manager Modems. -9-
ページ15に含まれる内容の要旨
When Windows prompt the following picture, Right-click Generic SoftK56. Select Properties. 2. When you see the following picture, select Driver. Then click Update Driver…button. 3. Click OK and load the device driver Compact Disc into your CD-ROM drive. -10-
ページ16に含まれる内容の要旨
4. Select Install from a list of specific location (Advanced) when you see the following picture. Click Next to continue. 5. Select Don't search. I will choose the driver to install. Click Next. 6. Click Have Disk. -11-
ページ17に含まれる内容の要旨
7. Click the Browse… button to select the E:\ Driver\WinXP folder in your CD-ROM drive. 8. Select the DCRCST5 file in WinXP folder. Click Open to continue. 9. Click OK. -12-
ページ18に含まれる内容の要旨
10. Click Next. 11. Click Continue Anyway when the following picture appears. -13-
ページ19に含まれる内容の要旨
12. The installation program will proceed automatically. 13. Click Finish to complete the software installation. 14. Click Close. -14-
ページ20に含まれる内容の要旨
Windows NT Installation 1. Reboot the computer system after the modem is correctly plugged into your PCI slot of computer. 2. Load the device driver compact disk in the CD-ROM drive. 3. Start Windows NT. 4. Go to My Computer. 5. Click the CD-ROM drive. Click the driver\winnt folder. Or you may click the Browse button to select the CD-ROM drive and the driver\winnt folder. 6. Double-click setup.exe. The installation program will proceed automatically. -15-
