ページ1に含まれる内容の要旨
BIPAC-7560/7560G
Powerline(802.11g)
ADSL VPN Firewall Router
User’s Manual
Version Release 1.54c
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Table of Contents Table of Contents CHAPTER 1: INTRODUCTION ..........................1 CHAPTER 1: INTRODUCTION ..........................1 INTRODUCTION TO YOUR BIPAC-7560(G) ROUTER ............................................................... 1 FEATURES ........................................................................................................................... 1 BIPAC- 7560(G) POWERLINE(802.11G) ADSL ROUTER APPLICATION ................................. 4 CHAPTER 2: IN
ページ4に含まれる内容の要旨
PPTP Status................................................................................................................................23 IPSec Status ............................................................................................................................... 24 L2TP Status ................................................................................................................................25 Powerline ....................................................
ページ5に含まれる内容の要旨
L2TP 82 QoS (Quality of Service).............................................................................................................107 Prioritization .........................................................................................108 IP Throttling..........................................................................................109 Virtual Server (“Port Forwarding”) ............................................................................................
ページ6に含まれる内容の要旨
ページ7に含まれる内容の要旨
Billion BIPAC-7560/7560G Powerline(802.11g) ADSL VPN Firewall Router Chapter 1: Introduction Introduction to your BIPAC-7560(G) Router Welcome to the Billion BIPAC-7560(G) Powerline(802.11g) Router. Your Billion router is an “all- in-one” unit, combining an ADSL modem, ADSL router and Ethernet network switch, providing everything you need to get the machines on your network connected to the Internet over your ADSL broadband connection. With features such as an ADSL Quick-Start wizard a
ページ8に含まれる内容の要旨
Billion BIPAC-7560/7560G Powerline(802.11g) ADSL VPN Firewall Router Quick Installation Wizard Supports a WEB GUI page to install this device quickly. With this wizard, end users can enter the information easily which they get from their ISP, then surf the Internet immediately. Universal Plug and Play (UPnP) and UPnP NAT Traversal This protocol is used to enable simple and robust connectivity among stand-alone devices and PCs from many different vendors. It makes network
ページ9に含まれる内容の要旨
Billion BIPAC-7560/7560G Powerline(802.11g) ADSL VPN Firewall Router Rich Packet Filtering Not only filters the packet based on IP address, but also based on Port numbers. It will filter packets from and to the Internet, and also provides a higher level of security control. Dynamic Host Configuration Protocol (DHCP) client and server In the WAN site, the DHCP client can get an IP address from the Internet Service Provider (ISP) automatically. In the LAN site, the DHCP server can
ページ10に含まれる内容の要旨
Billion BIPAC-7560/7560G Powerline(802.11g) ADSL VPN Firewall Router BIPAC- 7560(G) Powerline(802.11g) ADSL Router Application BIPAC-7560 Powerline ADSL Router Figure 1.1 Application Diagram of BIPAC-7560 Powerline ADSL VPN Firewall Router BIPAC- 7560G Powerline 802.11g ADSL Router Figure 1.2 Application Diagram of BIPAC-7560G Powerline 802.11g ADSL VPN Firewall Router Thank you for your purchase, and welcome to the world of broadband Internet! 4 Chapter 1: Intr
ページ11に含まれる内容の要旨
Billion BIPAC-7560/7560G Powerline(802.11g) ADSL VPN Firewall Router Chapter 2: Installing the Router Important note for using the BIPAC-7560(G) ADSL Router Do not use the BIPAC-7560(G) in high humidity or high temperatures. Do not use the same power source for the BIPAC-7560(G) as other equipment. Do not open or repair the case yourself. If the BIPAC-7560(G) is Warning too hot, turn off the power immediately and have it repaired at a qualified service center.
ページ12に含まれる内容の要旨
Billion BIPAC-7560/7560G Powerline(802.11g) ADSL VPN Firewall Router The Front LEDs ＊Only the BIPAC-7560G has a wireless interface and antenna. BIPAC-7560 router does NOT have an antenna or wireless interface. LED Meaning 1 PWR Lit when power is ON. 2 SYS Lit when the system is ready. 3 LAN port 1 Lit when connected to an Ethernet device. Green for 100Mbps; Orange for 10Mbps Blinking when data is transmitted/received. 4 LAN port 2 Lit wh
ページ13に含まれる内容の要旨
Billion BIPAC-7560/7560G Powerline (802.11g) ADSL VPN Firewall Router The Rear Ports 5 4 3 2 6 1 ＊Only the BIPAC-7560G has a wireless interface and antenna. BIPAC-7560 router does NOT have an antenna or wireless interface. Port Meaning 1 Connect the supplied RJ-11 (“telephone”) cable to this port when LINE connecting to the ADSL/telephone network. 2 Connect a PS2/RS-232 cable to this port when connecting to a CONSOLE PC’s
ページ14に含まれる内容の要旨
Billion BIPAC-7560/7560G Powerline(802.11g) ADSL VPN Firewall Router Cabling One of the most common causes of problems is bad cabling or ADSL line(s). Make sure that all connected devices are turned on. On the front of the product is a bank of LEDs. Verify that the LAN Link and ADSL line LEDs are lit. If they are not, verify that you are using the proper cables. Ensure that all other devices connected to the same telephone line as your Billion router (e.g. telephones, fax machines, a
ページ15に含まれる内容の要旨
Billion BIPAC-7560/7560G Powerline(802.11g) ADSL VPN Firewall Router Chapter 3: Basic Installation The router can be configured with your web browser. A web browser is included as a standard application in the following operating systems: Linux, Mac OS, Windows 98/NT/2000/XP/Me, etc. The product provides a very easy and user-friendly interface for configuration. PCs must have an Ethernet interface installed properly and be connected to the router either directly or through an extern
ページ16に含まれる内容の要旨
Billion BIPAC-7560/7560G Powerline(802.11g) ADSL VPN Firewall Router Configuring PCs in Windows For Windows XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click Network Connections. 2. Double-click Local Area Connection. (See Figure 3.1) Figure 3.1: LAN Area Connection 3. In the LAN Area Connection Status window, click Properties. (See Figure 3.2) 4. Select Internet Protocol (TCP/IP) and click Properties. (See Figure 3.3) 5. S
ページ17に含まれる内容の要旨
Billion BIPAC-75607560G Powerline(802.11g) ADSL VPN Firewall Router For Windows 2000 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click Network and Dial-up Connections. Figure 3.5: LAN Area Connection 2. Double-click Local Area (“LAN”) Connection. (See Figure 3.5) 3. In the LAN Area Connection Status window, click Properties. (See Figure 3.6) 4. Select Internet Protocol (TCP/IP) and click Properties. (See Figure 3.7) 5. Select the O
ページ18に含まれる内容の要旨
Billion BIPAC-7560/7560G Powerline(802.11g) ADSL VPN Firewall Router For Windows 98 / ME 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click Network and choose the Configuration tab. 2. Select TCP / IP -> NE2000 Compatible, or the name of any Network Interface Card (NIC) in your PC. (See Figure 3.9) 3. Click Properties. Figure 3.9: TCP / IP 4. Select the IP Address tab. In this page, click the Obtain an IP address automatically radio button.
ページ19に含まれる内容の要旨
Billion BIPAC-75607560G Powerline(802.11g) ADSL VPN Firewall Router For Windows NT4.0 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties. (See Figure 3.12) 3. Select the Obtain an IP address from a DHCP server radio button and click OK. (See Figure 3.13) Figure 3.12: TCP / IP Figure 3.13: IP Address 13 Chapter 3: Basic Installation
ページ20に含まれる内容の要旨
Billion BIPAC-7560/7560G Powerline(802.11g) ADSL VPN Firewall Router Factory Default Settings Before configuring your, you need to know the following default settings. Web Interface: Username: admin Password: admin LAN Device IP Settings: IP Address: 192.168.1.254 Subnet Mask: 255.255.255.0 ISP setting in WAN site: PPPoE DHCP server: DHCP server is enabled. Start IP Address: 192.168.1.100 IP pool counts: 100 Powerline: Network Password: HomePlu
