ページ1に含まれる内容の要旨
MicroRouter 2270R
Installation Guide
Compatible Systems Corporation
4730 Walnut Street
Suite 102
Boulder, Colorado 80301
303-444-9532
800-356-0283
http://www.compatible.com
ページ2に含まれる内容の要旨
MicroRouter 2270R Installation Guide, Version 3.0 Copyright© 1999, Compatible Systems Corporation All rights reserved. MicroRouter and CompatiView are trademarks of Compatible Systems Corporation. Other trademarks are the property of their respective holders. Part number: A00-1281 FCC Notice: This product has been certified to comply with the limits for a Class A computing device, pursuant to Subpart J of Part 15 of FCC Rules. It is designed to provide reasonable protection against radio or tele
ページ3に含まれる内容の要旨
Chapter 1 - Introduction 1 ABOUT THE MICROROUTER 2270R 1 ANOTE ABOUT FIREWALLS 1 ANOTE ABOUT ON-DEMAND INTERNETWORKING 1 MICROROUTER 2270R INSTALLATION OVERVIEW 2 Chapter 2 - Getting Started 5 AFEW NOTES 5 Please Read The Manuals 5 Warranty and Service 5 Getting Help With the MicroRouter 2270R 5 WHAT YOU WILL NEED TO GET STARTED 6 Supplied with the MicroRouter 2270R 6 Needed For Installation 6 Ethernet Connection Requirements 7 10Base-T Twisted-Pair Ethernet 7 T1 Line Connection Requirements 7 O
ページ4に含まれる内容の要旨
Chapter 5 - Command Line Management 15 Out-of-Band Command Line Management 15 Temporarily Reconfiguring a Host for Command Line Management 16 Setting Up Telnet Operation 16 Chapter 6 - Basic Configuration Guide 19 ETHERNET INTERFACE CONFIGURATION 19 IP Protocol 20 Required for IP 20 Suggested for IP 20 IPX Protocol 20 Required for IPX 20 Suggested for IPX 21 AppleTalk Protocol 21 Required for AppleTalk 21 Suggested for AppleTalk 21 DECnet Protocol 21 Required for DECnet 21 Suggested for DECnet 2
ページ5に含まれる内容の要旨
Required for IP 24 Suggested for IP 24 IPX Protocol 25 Required for IPX 25 Suggested for IPX 25 AppleTalk Protocol 25 Required for AppleTalk 25 Suggested for AppleTalk 25 DECnet Protocol 26 Required for DECnet 26 Suggested for DECnet 26 Frame Relay Configuration 27 Internal T1 CSU/DSU (WAN 0) Link Configuration 27 Required for Dedicated/Leased Line Operation 27 Suggested for Dedicated/Leased Line Operation 27 RS-232 (WAN 1) Link Configuration 27 Suggested for Dedicated/Leased Line Operation 27 F
ページ6に含まれる内容の要旨
Appendix A - Shipping Defaults 33 Default Password 33 Ethernet Interfaces 33 IP Routing Defaults 33 IP Bridging Defaults 33 IPX Routing Defaults 33 IPX Bridging Defaults 33 AppleTalk Routing Defaults 33 AppleTalk Bridging Defaults 33 DECnet Defaults 33 WAN Interfaces 34 IP Defaults 34 IPX Defaults 34 AppleTalk Defaults 34 DECnet Defaults 34 T1 CSU/DSU (WAN 0) Link & Physical Defaults 34 RS-232 (WAN 1) Link & Physical Defaults 34 Appendix B - Connector and Cable Pin Outs 35 Pin Outs for T1 Female
ページ7に含まれる内容の要旨
Chapter 1 - Introduction 1 Chapter 1 - Introduction About the MicroRouter 2270R Congratulations on your purchase of the MicroRouter 2270R multiport wide area router with integrated Fractional/Full T1 CSU/DSU. The MicroRouter 2270R supports the IP, IPX, AppleTalk, and DECnet network protocols, with leased-line and/or dial-on-demand operation using the PPP, Frame Relay and/or SMDS wide area protocols. A Note About Firewalls The MicroRouter 2270R can be configured to be a very effective packet scre
ページ8に含まれる内容の要旨
2 Chapter 1 - Introduction YOU SHOULD CAREFULLY MONITOR PHONE LINE USAGE TO BE SURE THAT YOUR ROUTER CONFIGURATION IS ALLOWING THE ROUTER TO DROP THE COMMUNICATIONS LINK WHEN IT ISN’T NEEDED. MicroRouter 2270R Installation Overview This manual will help you install the MicroRouter 2270R to connect two local Ethernets to one or two remote networks and/or remote PPP client computers. These connections can be made to other Compatible Systems routers, routers from other vendors, or PPP compliant dia
ページ9に含まれる内容の要旨
Chapter 1 - Introduction 3 The manual is divided into several sections that should provide you with all the information you will need to use the MicroRouter 2270R on your network. For the latest documentation on Compatible Systems products, including the most current version of this manual, visit the Technical Support section of our Web site at: http://www.compat- ible.com. Chapter 2 - Getting Started This part of the manual describes the contents of the MicroRouter 2270R package and emphasizes
ページ10に含まれる内容の要旨
.
ページ11に含まれる内容の要旨
Chapter 2 - Getting Started 5 Chapter 2 - Getting Started AFew Notes Please Read The Manuals The manuals included with your MicroRouter 2270R contain very important information about the MicroRouter 2270R and local and wide area networking in general. Please read this manual thoroughly, and refer to the management reference guides as required. It’s worth the few minutes it will take. Also, please fill out the warranty registration card and return it to us today. This will help us keep you inform
ページ12に含まれる内容の要旨
6 Chapter 2 - Getting Started What You Will Need To Get Started Before connecting the MicroRouter 2270R, please check the list below to make sure that you have received all of the items that are supplied with the MicroRouter 2270R package. You should also make sure you have any additional items that are necessary to connect the router to your network. Supplied with the MicroRouter 2270R Please check your shipping package for the following items: MicroRouter 2270R unit Wall-mount power supply
ページ13に含まれる内容の要旨
Chapter 2 - Getting Started 7 Ethernet Connection Requirements The MicroRouter 2270R’s Ethernet interfaces directly support 10BaseT twisted-pair Ethernet. Other Ethernet cabling types (such as thin Ethernet, thick Ethernet, fiber optic cabling or pre-10BaseT twisted-pair) can be supported using a 10BaseT mini-hub or other conversion device. 10Base-T Twisted-Pair Ethernet To connect the router's Ethernet interface to twisted-pair Ethernet cabling you will need an unshielded twisted-pair station c
ページ14に含まれる内容の要旨
8 Chapter 2 - Getting Started The MicroRouter 2270R secondary port is an RS-232 sync/async inter- face. The RS-232 interface is capable of communicating to another router or a PPP client machine over a modem, 56K CSU/DSU, or ISDN Terminal Adapter. RS-232 Interface The MicroRouter 2270R includes one DB-25 to DB-25 RS-232 sync/async cable. This cable supports RS-232 asynchronous modems, synchronous leased and switched 56K CSU/DSU’s, and ISDN Terminal Adapters. It can also be used to connect the ro
ページ15に含まれる内容の要旨
Chapter 3 - Network Installation 9 Chapter 3 - Network Installation MicroRouter 2270R Back Panel This section of the manual describes how to connect the MicroRouter 2270R to your Ethernet network and your wide area communications device(s). In summary, the steps for installation are: 1. Make sure the router is powered down and not connected to any power source. 2. Connect the router to the Ethernet network(s). 3. Connect the router to the T1 line. 4. Connect the router’s secondary port to a wide
ページ16に含まれる内容の要旨
10 Chapter 3 - Network Installation Connecting the Router to the Ethernet If your twisted-pair hub is already in place, you can connect the router to an active network without interrupting network activity. The router must be powered off. Connecting to Twisted-Pair Ethernet Before connecting the router to twisted-pair cabling you need an unshielded twisted-pair cable that is already connected to your 10BaseT-compatible twisted-pair hub. To connect the router to the twisted-pair network, simply p
ページ17に含まれる内容の要旨
Chapter 3 - Network Installation 11 Note: The MicroRouter 2270R RS-232 interfaces require that your asynchronous line communications device be set to supply the RS-232 DCD signal when a connection has been made. A synchronous RS-232 device should be set to provide DSR. Note: The MicroRouter 2270R includes a special cable to facilitate connections to RS-232 line communications devices. This cable includes support for several asynchronous and synchronous control signals. Off-the-shelf cables g
ページ18に含まれる内容の要旨
.
ページ19に含まれる内容の要旨
Chapter 4 - CompatiView Software Installation 13 Chapter 4 - CompatiView Software Installation All of the routers in Compatible Systems’ internetworking and VPN families, including all RISC Router and MicroRouter models, can be managed from a single GUI management platform called CompatiView. CompatiView for Windows is included on the CD-ROM which was shipped with your MicroRouter 2270R. Note: An older version of CompatiView for Mac OS was included on the CD-ROM shipped with your router, but d
ページ20に含まれる内容の要旨
14 Chapter 4 - CompatiView Software Installation Run the auto-installation program (CV5x file) by double-clicking on it. The installation program will ask you to select (or create) a directory in which it should locate CompatiView and its associated files and data- base subdirectory. Once the installation is complete, double-click on the CompatiView icon to open the program. For further information on using Compati- View, see the CompatiView Management Software Reference Guide included with your
