ページ1に含まれる内容の要旨
DI-1162
Remote Access Router
User’ s Guide
Rev. 03 (Oct, 1999)
6DI1162…03
Printed In Taiwan
RECYCLABLE
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
DI-1162 Remote Access Router Copyright Statement Copyright ©1999 D-Link Corporation No part of this publication may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems Inc., as stipulated by the United States Copyright Act of 1976. Trademarks D-Link is a registered trademark of D-Link Corporation/D-Link Systems, Inc. All other trademarks belong to their respective own
ページ4に含まれる内容の要旨
ページ5に含まれる内容の要旨
DI-1162 Remote Access Router Limited Warranty Hardware: D-Link warrants each of its hardware products to be free from defects in workmanship and materials under normal use and service for a period commencing on the date of purchase from D-Link or its Authorized Reseller and extending for the length of time stipulated by the Authorized Reseller or D-Link Branch Office nearest to the place of purchase. This Warranty applies on the condition that the product Registration Card is filled out and retu
ページ6に含まれる内容の要旨
DI-1162 Remote Access Router (such as a copy of the dated purchase invoice) must be provided when requesting warranty service. The term "purchase" in this software warranty refers to the purchase transaction and resulting license to use such software. D-Link warrants that its software products will perform in substantial conformance with the applicable product documentation provided by D-Link with such software product, for a period of ninety (90) days from the date of purchase from D-Link or i
ページ7に含まれる内容の要旨
DI-1162 Remote Access Router Table of Contents INTRODUCTION ...............................................................................1 Ease of Installation .........................................................................1 Networking Compatibility ...............................................................2 PRODUCT FEATURES ...........................................................................2 LAN Port ......................................................................
ページ8に含まれる内容の要旨
DI-1162 Remote Access Router Step 2 - Connecting the Console to the Router .............................14 Step 3 - Initial Configuration of the Router ..................................15 Step 3a - Configuring the LAN Port..............................................17 Step 3b - Configuring the WAN Ports for Dial-in, Dial-out and Leased Lines..................................................................................19 Step 4 - Connecting the Router to a LAN .............................
ページ9に含まれる内容の要旨
DI-1162 Remote Access Router PPP Configuration........................................................................95 ADMIN[ISTRATION] CONFIGURATION ................................................99 SYSTEM MAINTENANCE ..................................................................100 System Status...............................................................................103 Statistics ......................................................................................103 Log and Tra
ページ10に含まれる内容の要旨
DI-1162 Remote Access Router APPENDIX B – SPECIFICATIONS .............................................139 APPENDIX C - IP CONCEPTS.....................................................141 IP ADDRESSES ................................................................................141 IP Network Classes .....................................................................142 SUBNET MASK ................................................................................143 APPENDIX D – IP PROTOCOL AND
ページ11に含まれる内容の要旨
DI-1162 Remote Access Router Introduction Congratulations on your purchase of a D-Link DI-1162 Remote Access Router. Your new router offers inexpensive yet complete telecommunications and internetworking solutions for your corporate office, school or business. It is ideal for everything from Internet browsing to receiving calls from Remote Dial-in Users. It incorporates the most recent technologies to make fast, secure and stable connections to remote stations via LAN to WAN and vice versa. Dis
ページ12に含まれる内容の要旨
DI-1162 Remote Access Router Networking Compatibility The DI-1162 is compatible with remote access products from other companies such as Ascend, Cisco, and 3Com. Furthermore, it supports Microsoft Windows 95, Windows 98, and Windows NT remote access capability. Product Features LAN Port The DI-1162 is equipped with an auto-negotiated 10/100 (Ethernet and Fast Ethernet) RJ-45 jack for connecting the router to the LAN. Multiple WAN Ports The DI-1162 has two EIA-530 WAN ports, each of which can be
ページ13に含まれる内容の要旨
DI-1162 Remote Access Router These modules allow you to expand the functionality of the DI-1162 to fulfill all your internetworking needs. Dial on Demand The Dial-On-Demand feature allows the DI-1162 to automatically place a call to a remote node, via a WAN, whenever there is traffic coming from any workstation on the LAN to that remote site. Full Network Management The DI-1162 incorporates SNMP (Simple Network Management Protocol) agents and a menu-driven Network Management System accessible vi
ページ14に含まれる内容の要旨
DI-1162 Remote Access Router assigning and managing IP addresses for each individual machine on the LAN. Data Compression The DI-1162 incorporates the hardware-based Stac LZS Data Compression for CCP (Compression Control Protocol). Network Address Translation (NAT/NAPT) This feature allows multiple users on the LAN to access the Internet (through an Internet Service Provider) concurrently through a single IP address. This is especially useful for corporate office environments, where a large numb
ページ15に含まれる内容の要旨
DI-1162 Remote Access Router Link Branch Offices The DI-1162 routes communications through its two (upgradeable to four) WAN ports allowing direct communications to a branch office via phone lines, the internet or both. Local Routing The DI-1162 can route traffic between up to eight local IP networks. Telecommuting The DI-1162 allows remote users to dial in and obtain remote access to the LAN. This feature enables users that have workstations with remote access capability, e.g. Windows 95, to d
ページ16に含まれる内容の要旨
DI-1162 Remote Access Router ♦ At least one modem or CSU/DSU for connecting the WAN port(s) to a telephone line. ♦ At least one Internet IP Address per port on the router. ♦ An Internet Service Provider (ISP). 6
ページ17に含まれる内容の要旨
DI-1162 Remote Access Router Installation This chapter details installation procedures for the DI-1162 router. Overview T he DI-1162 can be configured in two ways; through a direct serial connection (a console), or remotely, through the included Router Configuration Utility, Telnet, etc. Please note that if you wish to remotely configure the router, you must still use a console to initially configure the LAN or WAN port for a remote connection. In general, the installation procedures are as
ページ18に含まれる内容の要旨
DI-1162 Remote Access Router Other Resources For more information about your DI-1162 check the following sources: ♦ Quick Installation Guide. ♦ Support disk containing RouteView, a Windows-based configuration program used to set up and configure the router. ♦ Frequently Asked Questions (FAQ) and application notes for this router can be found on the D-Link web site at http://tsd.dlink.com.tw. Packing List Before you proceed further, please check all items you received with your DI-1162 Router
ページ19に含まれる内容の要旨
DI-1162 Remote Access Router Identifying External Components The following section illustrates the different components on the router’s front and rear panels. Before using the router it is highly recommended to familiarize yourself with these components to ensure effective use of the device. • LED Indicators The front panel consists of the LED indicators of the router. The LED indicators are used to facilitate monitoring and troubleshooting. Please refer to the following chart for detailed desc
ページ20に含まれる内容の要旨
DI-1162 Remote Access Router LED STATUS/ FUNCTION Power Lights whenever the router is plugged in, turned on, and thus receiving power. Diag Lights during the startup POST test. Boot Lights briefly during startup after the PROM program has executed. Indicates a successful boot up. Run Should be slowly blinking if the router is functioning properly. 10/100 This LED is ON for a 100Mbps link, and OFF for a 10Mbps link. Link/Act This LED is ON to show a good link to the LAN, and quickly flashes to sh
