ページ1に含まれる内容の要旨
LANCOM 3550 Wireless
ページ2に含まれる内容の要旨
© 2006 LANCOM Systems GmbH, Wuerselen (Germany). All rights reserved. While the information in this manual has been compiled with great care, it may not be deemed an assurance of product characteristics. LANCOM Systems shall be liable only to the degree specified in the terms of sale and delivery. The reproduction and distribution of the documentation and software included with this product is subject to written per- mission by LANCOM Systems. We reserve the right to make any alterations that ar
ページ3に含まれる内容の要旨
LANCOM 3550 Wireless Preface Preface Thank you for placing your trust in this LANCOM product. The combination of UMTS/HSDPA, WLAN, DSL and VPN opens up a completely new range of possibilities in enterprise connectivity—for example, mobile conferen-ce rooms that are connected via UMTS/HSDPA and offer Internet access over WLAN or access to the company network via VPN. As a back-up connection for site coupling, UMTS/HSDPA is cheaper and faster than the conventional alternative, ISDN. Furthermore
ページ4に含まれる内容の要旨
LANCOM 3550 Wireless Preface Systems design of the LCOS operating system Configuration Management Diagnosis Security Routing and WAN functions Firewall Quality of Service (QoS) Virtual Private Networks (VPN) Virtual Local Networks (VLAN) Wireless Networks (WLAN) Backup Solutions LANCAPI Further server services (DHCP, DNS, charge management) This documentation was compiled … ...by several members of our staff from a variety of departments in order to ensure you the b
ページ5に含まれる内容の要旨
LANCOM 3550 Wireless Preface numbers and contact information for LANCOM Systems support can be found on a separate insert, or at the LANCOM Systems website. Notes symbols Very important instructions. If not followed, damage may result. Important instruction that should be followed. Additional instructions which can be helpful, but are not required. 5 EN
ページ6に含まれる内容の要旨
LANCOM 3550 Wireless Contents Contents 1 Introduction 9 1.1 What is a Wireless LAN? 9 1.1.1 Which hardware to use? 9 1.1.2 Operation modes of Wireless LANs and base stations 9 1.2 The advantages of the UMTS/HSPDA solution 10 1.2.1 “Last mile“ via UMTS/HSPDA 10 1.2.2 Mobile conference room 11 1.2.3 UMTS/HSPDA Backup 12 1.3 What can your LANCOM Router do? 14 2 Installation 17 2.1 Package contents 17 2.2 System preconditions 17 2.3 Status displays, interfaces an hardware installation
ページ7に含まれる内容の要旨
LANCOM 3550 Wireless Contents 4 Setting up Internet access 38 4.1 Instructions for LANconfig 39 4.2 Instructions for WEBconfig 39 5 Setting up the UMTS profile 41 5.1 Internet access 41 5.2 VPN site coupling 44 5.3 Other settings 46 5.3.1 Choosing the mobile telephone network 46 5.3.2 Activate UMTS/GPRS profile 47 5.3.3 UMTS/HSPDA only or automatic UMTS/HSPDA/GPRS selection 48 5.3.4 Set up a time limit 49 6 Point-to-point connections 50 6.1 Antenna alignment for P2P operations 51
ページ8に含まれる内容の要旨
LANCOM 3550 Wireless Contents 7 Security settings 56 7.1 Security for the Wireless LAN 56 7.1.1 Closed network 56 7.1.2 Access control via MAC address 57 7.1.3 LANCOM Enhanced Passphrase Security 57 7.1.4 Encryption of the data transfer 58 7.1.5 802.1x / EAP 59 7.1.6 IPSec over WLAN 60 7.2 Tips for handling keys 60 7.3 The security settings wizard 61 7.3.1 Wizard for LANconfig 61 7.3.2 Wizard for WEBconfig 62 7.4 The firewall wizard 62 7.4.1 Wizard for LANconfig 63 7.4.2 Configu
ページ9に含まれる内容の要旨
LANCOM 3550 Wireless Chapter 1: Introduction 1Introduction 1.1 What is a Wireless LAN? The following sections describe the functionality of wireless networks in general. The functions supported by your device are listed in the table 'What can your LANCOM Router do?'. Detailed information on Wireless LANs can be found in the LCOS reference manual. A Wireless LAN connects single terminals (e.g. PCs or notebooks) to a local network (also LAN – Local Area Network). In contrast to a conventional
ページ10に含まれる内容の要旨
LANCOM 3550 Wireless Chapter 1: Introduction Larger Wireless LANs, connection to LANs with one or more base stations (infrastructure network) Setting-up of an Internet access Connecting two LANs via a direct radio link (point-to-point mode) Connecting of devices with Ethernet interface via base stations (client mode) Extending an existing Ethernet network with WLAN (bridge mode) Relay function for connecting networks via multiple access points. 1.2 The advantages of the UMTS/HSPDA
ページ11に含まれる内容の要旨
LANCOM 3550 Wireless Chapter 1: Introduction Internet Internet connection over UMTS/HSPDA For a regular Internet connection over UMTS/HSPDA, various net providers offer so called “homezone“ tariffs. With this tariff the data transfer within the homezone radio cell is usually far below the costs of the usual mobile tariffs where the data card is used in multiple radio cells. A special application is the use of a WLAN Access Point with UMTS/ HSPDA connection and LANCOM UMTS/VPN Option as a Hot
ページ12に含まれる内容の要旨
LANCOM 3550 Wireless Chapter 1: Introduction Internet connection over UMTS/HSPDA Internet VPN connection to headquarters Mobile WLAN, e.g. for a „mobile conference room“. For a group of staff members, who e.g. often work together on projects at a customer’s location, a so-called mobile conference room can be established. The access point then only has to be configured once by the administrator; the staff members on location simply have to supply the device with power and slot in the data card
ページ13に含まれる内容の要旨
LANCOM 3550 Wireless Chapter 1: Introduction Internet connection over DSL Internet VPN connection to headquarters Brach office with VPN over DSL Backup connection over and backup over UMTS/HSPDA UMTS/HSPDA As an alternative to the ISDN or analog backup method, a UMTS/HSPDA con- nection can assure the availability of the data connection. If the connection to the Internet is established by a router with LANCOM UMTS/VPN Option, the UMTS/HSPDA connection can directly replace the DSL connection in
ページ14に含まれる内容の要旨
LANCOM 3550 Wireless Chapter 1: Introduction LANCOM devices with more than one WAN interface (e.g. DSL and UMTS/ HSPDA interface) can be implemented flexibly in backup solutions. The backup event is triggered for example, when the default route is no longer available via the DSL interface. The device's UMTS/HSPDA interface can take its place further along in the backup chain should the the backup router also fail. Branch Headquarters Internet DSL UMTS/ HSPDA ISDN Further information to the con
ページ15に含まれる内容の要旨
LANCOM 3550 Wireless Chapter 1: Introduction LANCOM 3550 Wireless UMTS/HSPDA function for minternet connection, as mobile conference ✔ room or as backup solution Wireless LAN Wireless transmission by IEEE 802.11g / IEEE 802.11b or wireless ✔ transmission by IEEE 802.11a Simultaneous dual band operation possible with additional radio card ✔ Point-to-point mode (six P2P paths can be defined per WLAN inter- ✔ face) Relay function to link two P2P connections ✔ Turbo Mode: Double the bandwidth a
ページ16に含まれる内容の要旨
LANCOM 3550 Wireless Chapter 1: Introduction LANCOM 3550 Wireless DHCP and DNS server ✔ Connection to the WAN WAN connection for DSL or cable modem ✔ UMTS/HSPDA connection via UMTS card in CardBus slot ✔ Internet access (IP router) Stateful Inspection Firewall ✔ Firewall filter (address, port) ✔ IP masquerading (NAT, PAT) ✔ Quality of Service ✔ VPN gateway 4 Digital certificates (X.509) incl. PKCS#12 4 Power supply 12 V via seperate power adapter (AC) ✔ Power-over-Ethernet (PoE) : proprietar
ページ17に含まれる内容の要旨
LANCOM 3550 Wireless Chapter 2: Installation 2 Installation This chapter will assist you to quickly install hardware and software. First, check the package contents and system requirements. The device can be installed and configured quickly and easily if all prerequisites are fulfilled. 2.1 Package contents Please check the package contents for completeness before starting the installation. In addition to the base station itself, the package should contain the following accessories: LANCOM 355
ページ18に含まれる内容の要旨
LANCOM 3550 Wireless Chapter 2: Installation 2.3 Status displays, interfaces an hardware installation 2.3.1 Status display Meanings of the LEDs In the following sections we will use different terms to describe the behaviour of the LEDs: Blinking means, that the LED is switched on or off at regular intervals in the respective indicated colour. Flashing means, that the LED lights up very briefly in the respective col- our and stay then clearly longer (approximately 10x longer) switched off.
ページ19に含まれる内容の要旨
LANCOM 3550 Wireless Chapter 2: Installation Power WLANLink Power This LED indicates that the device is operational. After the device has been switched on, it will flash green for the duration of the self-test. After the self- test, either an error is output by a flashing red light code or the device starts and the LED remains lit green. off Device off green blinking Self-test when powering up green Device ready for use red/ blinking alternately Device insecure: configuration password
ページ20に含まれる内容の要旨
LANCOM 3550 Wireless Chapter 2: Installation circumstances, you would assign a configuration password during the basic configuration (see instructions in the following chapter). Flashing Power-LED but no connection? There's no need to worry if the Power-LED blinks red and you can no longer connect to the WAN.This simply indicates that a preset time or connect-charge limit has been reached. There are three methods available for unlocking: Signal for reached time or connect-charge Reset conn
