ページ1に含まれる内容の要旨
Size: 90X128mm
Standard Definition Digital Set Top Box
DFTA2
The Gold Technical Support Line: 1902 215 259
(Charges will apply at $2.95 per minute)
INSTRUCTION MANUAL
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Introduction Thank you for buying this Bush product, which is designed to give you many years of trouble-free service. You may already be familiar with using a similar unit, but please take time to read these instructions. They are designed to familiarise you with the unit s m any features and to ensure you get the very best from your purchase. Safety is important Your safety and the safety of others is important. Please therefore, ensure you read the Safety Instructions before you oper
ページ4に含まれる内容の要旨
Safety Instructions Always read the safety instructions carefully Keep this Instruction Manual for future reference Keep this device away from humidity Lay this device on a reliable flat surface before setting it up Do not stand it on soft furnishings If any of the following situation arises, get the Set Top Box checked by a service technician: It has been exposed to moisture It has been dropped and damaged It has obvious signs of breakage It has not been working well or you cannot get i
ページ5に含まれる内容の要旨
About the Set Top Box This Set Top Box allows you to access Standard Definition Free-to -Air Digital TV Channels and Radio Broadcasts on your TV set. Its digital reception covers VHF & UHF band. Digital TV eliminates noise and interference and offers high quality video and audio. An easy to use on-screen installation guide is provided. In addition, a fully featured Remote Control is included that offers you access to every feature with a simple press of a button. Main Features
ページ6に含まれる内容の要旨
Table of Contents Panel Illustration..................................................1 Remote Control ..........................................................2 Connections................................................................... 4 Basic Operation ................................................................. 6 Quick Installation....................................................... 6 Menu Operations...............................................
ページ7に含まれる内容の要旨
Panel Illustration 1. Front panel 1 1. REMOTE CONTROL SENSOR: The remote control sensor receives the signal from your remote control. 1 2 3 4 5 1. RF IN: The RF IN allows you to connect your external aerial. 2. RF LOOP THROUGH: The RF Loop Through Input allows you to connect to your aerial through either your TV or other home entertainment device. 3.COMPOSITE VIDEO Out: The Composite Video Output allows you to connect the Set Top Box to your TV. Providing you with digital picture.
ページ8に含まれる内容の要旨
Remote Control Remote Control Functions: 1. MUTE: Press the Mute Button to turn the sound on or off. 2. NUMERIC BUTTONS: Press the Numeric Buttons to select a channel directly or to enter your password or Teletext options. 3. RECALL: Press the Recall Button to return back to the last program you were watching. 4. INFO: Press the INFO Button to display the program information of the channel you are watching. 5. SUBTITLE: Press the Subtitle Button to turn on or off the Subtitle feature.
ページ9に含まれる内容の要旨
Installing the Batteries Remove the battery cover from the remote control and put 2XAAA size batteries inside the compartment. The diagram inside the battery compartment shows the correct way to install the batteries. 1.Open the cover 2.Install batteries 3.Close the cover Using the Remote Control To use the remote control, point it towards the front of the digital set top box. The remote control has a range of up to 7 metres from the set top box at an angle of up to 60 degrees. The remote
ページ10に含まれる内容の要旨
Connections Caution: Make sure to check the voltage specification of the wall outlet is the same rating with the receiver. To prevent the risk of electric shock, do not open the cover or the back of the receiver. TV Aerial Composite audio RFIN (Opt ional) 4
ページ11に含まれる内容の要旨
Connections TV Aerial 5
ページ12に含まれる内容の要旨
Basic Operation 1.Quick Installation 1.1 Setting Country and Language After you have connected the Set Top Box follow the below steps to begin the Installation Guide: 1. Press the Menu Button to enter the Main Menu. 2. Use the Navigation Buttons to select the SETUP sub-menu. 3. Then use the Navigation Buttons to select the Installation option. 4. Press the OK Button to then confirm. When you have entered the Installation menu you will be asked to set the Country and Language you desire. Foll
ページ13に含まれる内容の要旨
Basic Operation 1.2.2 Manual Scan You can Manually scan for available stations via Manual Scan without deleting the current list. To conduct a Manual Scan follow the steps 1-8 in section 1.1. Then press the Green Button to enter Manual Scan Menu. Press the Up/Down Button to select the Frequency option. Use the Numeric Buttons to put in the Frequency/station you would like to search for. Then select the Bandwidth by using the Navigation Buttons. Press the OK Button to confirm and begin sc
ページ14に含まれる内容の要旨
Basic Operation 2.2. LCN Set the Logical Channel Number to on or off. Note: LCN is a number that uniquely identifies a logical channel, which is popular in some european countries such as England, France. 2.2.1 Daylight Saving/Region Setting/Time Zone Allow you to enable or disable daylight saving. If you know the region of your location,select an appropriate Region Setting or set the Time Zone offset manually. 2.2.2 TV Setup Setup the display mode for TV. See Figure 3. Flesh Tone
ページ15に含まれる内容の要旨
Basic Operation 2.2.2.3 Banner Display Time You can set the Banner Display Time with this setting. Use the Navigate Buttons to adjust. 2.2.3 Password Set or change the password select Password setting and enter the default pin code 6666 and then enter the new password using the Numeric Buttons. 2.2.3.1 Menu Lock Lock the menus by password. 2.2.3.2 Channel Lock Lock the channel which has been set to lock status when turning on the Channel Lock. Please see section 2.3.1.2 for details
ページ16に含まれる内容の要旨
Basic Operation 2.3.1 List Favorites To set a program to your favourite list press the FAV Button. There are 8 groups of favorites for you to set your favourite program to (News, Sport, Movie, Music, Shopping, Travel, Boy and Girl). Use the Numeric Buttons to select to Favourite group you wish to set. Lock If a program is password protected you will need to enter the set password to unlock before watching when the Lock Function is activated. Figure 5. TV List Rename Rename will allow
ページ17に含まれる内容の要旨
Basic Operation Skip To set a program to Skip in the program list, press the OK Button on a selected program and a skip status will be activated. Delete To delete a program from the program list, press the Green Button when the program has been selected. Then press the OK Button to confirm. The program will now be removed from the program list. Search You can search for a program by name using the search function. In the Program Menu press the Left/Right Buttons to select Search option and
ページ18に含まれる内容の要旨
Basic Operation 3. Daily Operation 3.1 Information To view the information of the program you are watching, press the Info Button and the information will be displayed. Figure7. Normal Play - Radio Figure 8. Program Info 3.2 Changing the Channel To change the channel, press the CH+/- Buttons or use the Numeric Buttons to input the program number directly. You can also press the Recall Button to return to the last program you viewed. 3.3 Volume To adjust the volume while watching TV, press
ページ19に含まれる内容の要旨
Basic Operation 3.6 Pause Press the Pause Button to pause the play of video and audio. Press again to resume play. 3.7 Teletext To enter the Teletext Menu, press the Text Button. Press the Numeric Buttons to select the Teletext page you wish to view. To confirm press the OK Button. You can change the language by using the Up/Down Buttons. To exit press the Exit Button. TELETEXT Teletext Language eng OFF Figure 10. Teletext Setting Page Figure 9. Audio Channel 3.9 Subtitle To display
ページ20に含まれる内容の要旨
Troubleshooting If you experience problems with this receiver or its installation, in the first instance please read carefully the relevant sections of this User Manual and this Troubleshooting section. Check the Mains power The unit will not The power is not connected is firmly connected and turn on switched on. Check your power source The Mains fuse may be blown and fuse. Check that the aerial is connected correctly, properly aligned and is not damaged. retailer Check the cables
