ページ1に含まれる内容の要旨
Quick Setup & Users Guide
Compaq iPAQ Desktop Personal Computer
221340-001
ページ2に含まれる内容の要旨
QuickSetup_UsersGuide.book Page 1 Wednesday, May 30, 2001 9:36 AM NOTICE © 2001 Compaq Computer Corporation. Except for use in connection with the accompanying Compaq product, no part of this guide may be photocopied or reproduced in any form without prior written consent from Compaq Computer Corporation. COMPAQ, the Compaq logo, and Armada Registered in U.S. Patent and Trademark Office. iPAQ is a trademark of Compaq Information Technologies Group, L.P. Microsoft, Windows, Windows NT, Windows
ページ3に含まれる内容の要旨
QuickSetup_UsersGuide.book Page 2 Wednesday, May 30, 2001 9:36 AM Quick Setup & User’s Guide
ページ4に含まれる内容の要旨
QuickSetup_UsersGuide.book Page 1 Wednesday, May 30, 2001 9:36 AM Contents Quick Setup Step 1: Unpack the Compaq iPAQ Desktop Personal Computer. . . . . . . . . . . . . .1 Step 2: Identify Rear Panel Components and Confirm Voltage Setting. . . . . . . . .2 USB Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Legacy Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Step 3: Connect External
ページ5に含まれる内容の要旨
QuickSetup_UsersGuide.book Page 2 Wednesday, May 30, 2001 9:36 AM Contents Uninstalling the iPAQ Desktop Security Bar. . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 Removing and Replacing the Side Access Panels . . . . . . . . . . . . . . . . . . . . . . 3-2 Adding System Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 Adding or Removing a Memory Module . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 Upgrading the Primary Hard Driv
ページ6に含まれる内容の要旨
QuickSetup_UsersGuide.book Page 3 Wednesday, May 30, 2001 9:36 AM Contents Entering a DriveLock Password on a MultiBay Hard Drive . . . . . . . . . . . . 6-11 Changing a DriveLock Password on a MultiBay Hard Drive. . . . . . . . . . . . 6-11 National Keyboard Delimiter Characters. . . . . . . . . . . . . . . . . . . . . . . . . . 6-12 Clearing Passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-12 Installing the iPAQ Desktop Security Bar . . . . . . . .
ページ7に含まれる内容の要旨
QuickSetup_UsersGuide.book Page 1 Wednesday, May 30, 2001 9:36 AM Quick Setup Step 1: Unpack the Compaq iPAQ Desktop Personal Computer WARNING: Misuse of your Personal Computer or failure to establish a safe and comfortable Å workstation may result in discomfort or serious injury. Refer to your Safety & Comfort Guide for more information on choosing a workspace and creating a safe and comfortable work environment. This equipment has been tested and found to comply with the limits for a Class
ページ8に含まれる内容の要旨
QuickSetup_UsersGuide.book Page 2 Wednesday, May 30, 2001 9:36 AM Quick Setup Step 2: Identify Rear Panel Components and Confirm Voltage Setting iPAQ Desktop Personal Computer with Legacy Module Installed iPAQ Legacy-Free Desktop Personal Computer 1 Monitor Connector 8 Dedicated, Full-Speed USB Connector 2 Universal Serial Bus (USB) Connectors 9 Legacy Module 3 Ethernet RJ-45 Connector - PS/2 Mouse Connector 4 Line-Out Audio Connector q PS/2 Keyboard Connector 5 Line-In Audio Connector w Seria
ページ9に含まれる内容の要旨
QuickSetup_UsersGuide.book Page 3 Wednesday, May 30, 2001 9:36 AM Quick Setup USB Connectors The iPAQ Desktop Personal Computer features two internal USB controllers, each providing data transfer rates up to 12 megabits per second (Mbps). One of these controllers is dedicated exclusively to a new, full-speed Universal Serial Bus (USB) connector (shown on the previous page). The other five USB connectors share the second controller. Any USB device (including keyboard and mouse) can be connected t
ページ10に含まれる内容の要旨
QuickSetup_UsersGuide.book Page 4 Wednesday, May 30, 2001 9:36 AM Quick Setup Step 3: Connect External Devices Connect the monitor, mouse, and keyboard cables. If you use a network, connect the network cable to the Ethernet RJ-45 Connector. For easy setup, Compaq has color-coded the cables and rear panel connectors. WARNING: To reduce the risk of electrical shock, fire, or damage to the equipment, do not plug Å telecommunications/telephone connections into the network interface controller (NIC
ページ11に含まれる内容の要旨
QuickSetup_UsersGuide.book Page 5 Wednesday, May 30, 2001 9:36 AM Quick Setup Step 4: Connect the Power Cords Connect the power cords as shown below. WARNING: To reduce the risk of electric shock or damage to the equipment: Å Do not disable the power cord grounding plug. The grounding plug is an important safety feature. Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times. Disconnect power from the Personal Computer by unplugging the po
ページ12に含まれる内容の要旨
QuickSetup_UsersGuide.book Page 6 Wednesday, May 30, 2001 9:36 AM Quick Setup Step 5: Identify the Front Panel Components 1 Dual-State Power Button 2 Power-On Light 3 System Activity Light 4 Microphone Connector 5 Headphone Connector 6 Universal Serial Bus (USB) Connectors 7 MultiBay Eject Button 8 MultiBay Quick Setup & User’s Guide 6
ページ13に含まれる内容の要旨
QuickSetup_UsersGuide.book Page 7 Wednesday, May 30, 2001 9:36 AM Quick Setup Step 6: Turn On the Personal Computer and Install the Operating System Press the power button to turn on the personal computer. Refer to “Step 2: Identify Rear Panel Components and Confirm Voltage Setting” on page 2 for the location of the power button. The first time you turn on the Personal Computer, the operating system is installed automatically. This process takes about 10 minutes, depending on which operating sys
ページ14に含まれる内容の要旨
QuickSetup_UsersGuide.book Page 8 Wednesday, May 30, 2001 9:36 AM Quick Setup CAUTION: To prevent loss of data, before using the Compaq Restore CD, be sure to back up any Ä data files and software application files created or installed after unbundling the factory-installed software. The Restore CD will erase all files from the hard drive before restoring the original operating system, Internet browser, and NIC or modem drivers. You may need to use the keyboard to make selections during the
ページ15に含まれる内容の要旨
QuickSetup_UsersGuide.book Page 9 Wednesday, May 30, 2001 9:36 AM Quick Setup 9 Quick Setup & User’s Guide
ページ16に含まれる内容の要旨
QuickSetup_UsersGuide.book Page 1 Wednesday, May 30, 2001 9:36 AM chapter 1 Working with the Compaq Easy Access Keyboard In addition to the standard keyboard keys, the Compaq Easy Access Keyboard offers eight Easy Access Buttons that make accessing your favorite Web sites, services, and applications easier and faster. Easy Access Keyboard Programming the Easy Access Buttons All Easy Access Buttons can be reprogrammed to open any software application or data file on your hard drive, or any Inter
ページ17に含まれる内容の要旨
QuickSetup_UsersGuide.book Page 2 Wednesday, May 30, 2001 9:36 AM Working with the Compaq Easy Access Keyboard To reprogram your Easy Access Buttons, complete the following steps: 1. Click the Easy Access Button icon located in the status area (lower right corner) of the Windows taskbar. The Easy Access Button dialog is displayed. 2. On the dialog, click the icon representing the Easy Access Button you want to program. 3. Type the new command or URL you want to assign to the button, or drag an I
ページ18に含まれる内容の要旨
QuickSetup_UsersGuide.book Page 1 Wednesday, May 30, 2001 9:36 AM chapter 2 Working with the MultiBay The MultiBay is located on the left side of the iPAQ Desktop Personal Computer. It is a special drive bay that supports a variety of optional 12.7-mm removable drives, including: MultiBay 24X Max CD-ROM Drive MultiBay 8X DVD-ROM Drive with Software MPEG-2 MultiBay SuperDisk LS-120 Drive MultiBay Zip 250 Drive MultiBay CD-RW Drive MultiBay SMART Hard Drive These drives may also be use
ページ19に含まれる内容の要旨
QuickSetup_UsersGuide.book Page 2 Wednesday, May 30, 2001 9:36 AM Working with the MultiBay “Hot-Plugging” or “Hot-Swapping” MultiBay Drives CAUTION: To prevent damage to the Personal Computer, the drive, and any data stored on the Ä drive: If you are inserting or removing a hard drive, shut down the Personal Computer. Never remove a hard drive while the Personal Computer is on or in Standby. To ensure that the Personal Computer is not in Standby, turn the Personal Computer on, then shut i
ページ20に含まれる内容の要旨
QuickSetup_UsersGuide.book Page 3 Wednesday, May 30, 2001 9:36 AM Working with the MultiBay Partitioning and Formatting a MultiBay Hard Drive 1. Exit all software applications, shut down the operating system software, and turn off the Personal Computer. 2. Insert the hard drive into the MultiBay as shown in the following section. 3. Turn on the Personal Computer. Follow directions for your operating system, below: Windows 98 and Windows Millennium (FDISK) 1. From MS-DOS command prompt, type FDI
