ページ1に含まれる内容の要旨
4-129-145-12 (1)
Before you begin
Digital Photo Preparations
Printer
Direct printing
DPP-FP67/FP77
Printing from a PictBridge
camera
Printing from a Bluetooth-
compliant device
Printing from a PC
Error messages
Operating Instructions Troubleshooting
Before operating this unit, please read “Read This First” and
“About the Print Packs” supplied and this manual, “Operating
Instructions,” thoroughly and retain them for future reference.
Additional information
Owner’s Record
The model and serial n
ページ2に含まれる内容の要旨
user is encouraged to try to correct the interference by one or more of the following measures: WARNING – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. To reduce fire or shock hazard, do not – Connect the equipment into an outlet on a circuit expose the unit to rain or moisture. different from that to which the receiver is connected. For the Customers in the U.S.A. – Consult the dealer or an experienced radio/TV who purchased the
ページ3に含まれる内容の要旨
Disposal of Old Electrical & Duplication, edition, or printing of a CD, TV Electronic Equipment (Applicable in program, copyrighted materials such as pictures or publications, or any other materials except for your the European Union and other own recording or creation is limited to private or European countries with separate domestic use only. Unless you hold copyright or collection systems) have permission from copyright holders for the This symbol on the materials to be duplicated,
ページ4に含まれる内容の要旨
On trademarks and copyrights • Cyber-shot, , “Memory Stick,” Notice for users , “Memory Stick Duo,” , “MagicGate Memory Stick,” “Memory Stick PRO,” , Program © 2009 Sony Corporation “Memory Stick PRO Duo,” Documentation © 2009 Sony Corporation , “Memory Stick PRO-HG Duo,” , “Memory Stick All rights reserved. This manual or the software Micro,” , , “Memory described herein, in whole or in part, may not be Stick-ROM,” , “MagicGate,” reproduced, translated or reduced to any machine
ページ5に含まれる内容の要旨
Editing an image ...........................23 Table of Contents Enlarging and reducing an image size ............................................... 23 Notice for users .............................4 Moving an image .......................... 23 Rotating an image ......................... 23 Before you begin Adjusting an image ........................ 23 Printing an edited image ............... 24 Identifying the parts ........................7 Undoing the operations ................. 24
ページ6に含まれる内容の要旨
Printing from a Bluetooth- Additional information compliant device Precautions ..................................62 Printing from a Bluetooth-compliant On safety ........................................62 device ...........................................35 On installation ................................62 Compatible profiles for Bluetooth On cleaning ....................................62 communication ..............................35 On restrictions on duplication ........63 Printing procedu
ページ7に含まれる内容の要旨
Before you begin Before you begin Printer front panel Identifying the parts A 1 (on/standby) button/STANDBY indicator For details, see the pages indicated in the B CANCEL/ (Index View) button parentheses. C MENU button Illustrations are of the DPP-FP77. The button D LCD screen locations and names of the DPP-FP67 are identical, although the LCD screen size is different. 2.4 type DPP-FP67 3.5 type DPP-FP77 E ENTER button F Direction (g/G/f/F) buttons G AUTO TOUCH-UP button (.page
ページ8に含まれる内容の要旨
Printer left side panel E USB connector (.page 39) When using your computer, connect it via a USB cable to this connector. F PictBridge/EXT INTERFACE connector (.pages 32 to 35) When using a PictBridge-compliant digital camera, a USB memory, a Bluetooth USB adaptor (DPPA-BT1*), or other external USB device, connect it to this connector. * In some regions, the DPPA-BT1 Bluetooth USB adaptor is not sold. Printer rear panel A Handle As illustrated below, raise the handle when you carry the p
ページ9に含まれる内容の要旨
Preparations Preparations Checking the contents Setting the ink ribbon of the package 1 Pull and open the ink ribbon compartment door. Make sure that the following accessories are supplied with your printer. 2 Insert the ink ribbon in the direction � Paper tray (1) of the arrow until it clicks into place. �AC adaptor (1) � USB cable (1) *1 � AC power cord (1) � Cleaning cartridge (1)/Cleaning sheet (1) � CD-ROM (Windows Printer Driver Software Ver.1.0 and PMB (Picture Motion Browser) Ver.
ページ10に含まれる内容の要旨
Notes Inserting the print paper � Do not touch the ink ribbon or store the ink ribbon in a dusty location. Fingerprints or dust on the ink ribbon may result in imperfect printing. 1 Open the paper tray cover. � Do not rewind the ink ribbon and use the rewound Hold the parts on both sides of the paper ink ribbon for printing. Otherwise, proper printing tray cover (shown with arrows) and open results will not be obtained, or a malfunction may the paper tray cover. occur. If the ink ribbon d
ページ11に含まれる内容の要旨
Preparations � To avoid paper jam or malfunctions of the printer, 3 Close the paper tray cover. make sure of the following before printing: – Do not write or type on the print paper. – Do not attach a sticker or stamps on the print paper. – When adding print paper to the paper tray, be sure that the total number of print paper sheets does not exceed 20 sheets. – Do not insert different types of print paper together into the paper tray. 4 Open the slide cover. – Do not print on used print pa
ページ12に含まれる内容の要旨
Connecting to the AC power source 10 cm (13/32 1 Insert the plug of the AC adaptor inches) into the DC IN 24 V jack on the back of the printer. 2 Connect one plug of the AC power cord to the connector of the AC adaptor and the other plug to the wall outlet. AC adaptor Notes � Do not place the printer in an unstable location such as on a wobbly table. To the wall outlet � Leave enough room around the printer. The print AC power cord paper emerges from the back a few times during printi
ページ13に含まれる内容の要旨
Preparations Operations in an initial state When the photo printer is turned on without a memory card inserted or a PC connected, the initial display below appears on the screen. When the printer is not operated for 5 seconds, demo mode is displayed. If any other button than the 1 (on/standby) button is pressed, the screen returns to the initial display. If a memory card is inserted, or a PC is connected, the images from the connected device are displayed. To print directly from a memory
ページ14に含まれる内容の要旨
Direct printing You can change the image preview view by setting the “On-screen Display” from the LCD screen display menu. (page 30) A Access indication An image preview Appears while the printer is accessing a On-screen Display: On memory card or a USB memory. Note While the access indication is displayed, do not remove a memory card or a USB memory, or do not turn off the power. Data may be damaged. B Input/setting indications Input indications and settings information for an image are
ページ15に含まれる内容の要旨
Direct printing D DPOF print preset indication Image list Displays a list of the images stored in the Switching an image preview selected media. and image list DPP-FP67 You can switch the display as follows: � To display the image list In an image preview, press the (Index View) button. When there are multiple pages, you can switch pages by pressing f/F. � To display an image preview In the image list, press g/G/f/F to move the cursor to the desired image and press ENTER. In an image p
ページ16に含まれる内容の要旨
Icons Meaning List of icons Exiting the menu (25) The following are the icons displayed on the LCD screen. Batch Print You can proceed with operations by selecting a Index Print (26) desired icon with g/G/f/F, and then pressing (Prints all the images in split ENTER. screens.) For detailed explanations, see the pages in the Print All (26) parentheses. (Prints one copy each for all the images.) Icons Meaning DPOF Print (26) Edit (23) (Prints the images with the print mark ( ) in an image
ページ17に含まれる内容の要旨
Direct printing Notes Basic printing � Insert only the memory card that you want to use for printing. When multiple memory cards are inserted, the memory card inserted first will have Inserting a memory card the first priority. � The printer supports both standard and small sizes. Prepare a memory card that contains images for A “Memory Stick Duo” media adaptor is not printing: “Memory Stick” media, “Memory necessary. Stick Duo” media, SD Memory Card, or an xD- � To use a memory card, f
ページ18に含まれる内容の要旨
On selecting input 4 Press PRINT. While the PRINT button is lit in green, the The printer is not equipped with an input select printer is ready for printing. The image switch. When you connect a memory card or a being displayed is printed. USB memory to the printer, images from the connected media are displayed automatically. To print multiple images If multiple memory cards or a USB memory Repeat steps 2 and 3. are connected, the media first connected has the To change the print quanti
ページ19に含まれる内容の要旨
Direct printing Enjoying various printing z Operation using the printer buttons AUTO TOUCH-UP MENU Exposure and Red-eye Correction .page 22 Press the AUTO TOUCH-UP button to automatically adjust a photo with problems, such as being backlit, or showing the red-eye phenomenon. A variety of printing Press MENU and then select the icon of the desired operation. �Press g/G/f/F to select the desired icon and press ENTER
ページ20に含まれる内容の要旨
1 Edit .page 23 You can adjust the size, position, hue or other picture property of the selected image. For the icons you can use, see page 16. 2 Layout Print .page 25 You can place multiple photos on split screens to make a print. You can make a print with 2-split, 4-split, 9-split, 13-split or 16-split images. 3 Batch Print .page 26 You can print a large number of images of a memory card or USB memory at one time. You can select from batch print options such as “Index Print,” “Print All,” an
