ページ1に含まれる内容の要旨
43-972.fm Page 1 Monday, August 16, 1999 4:19 PM
Cat. No. 43-972
OWNER’S MANUAL
Please read before using this equipment.
System 2000
100 Number Memory
2-Line Caller ID
With 100 Caller ID Memo-
ries
ページ2に含まれる内容の要旨
43-972.fm Page 2 Monday, August 16, 1999 4:19 PM Warning: To prevent fire or shock hazard, do not expose this product to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK. ! DO NOT OPEN. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. NO USER-SERVICE- ABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. This symbol is intended to alert you to the presence of uninsulated dangerous voltage within the product’s enclosure that might be of suf- ficient magnitude to
ページ3に含まれる内容の要旨
43-972.fm Page 3 Monday, August 16, 1999 4:19 PM FEATURES Your RadioShack Caller ID System 2000 is the latest in telephone Caller ID technology. If Caller ID service is available in your area and you subscribe to it, the telephone company sends the caller’s telephone number (and name, if available in your area) and the date and time of the call between the first and second rings. The module displays this information during an incoming call to help you identify the caller and avoid unwanted ca
ページ4に含まれる内容の要旨
43-972.fm Page 4 Monday, August 16, 1999 4:19 PM Large Display — makes it easy to see caller information, phone line in- formation, and the current time and date. Clock and Date Display — displays the current time and date as provid- ed to Caller ID service subscribers by your local telephone company. Message Received Indicator — flashes when you get an anonymous call, when you have at least one new call you have not reviewed, or when you have received voice mail (if you have message waiting
ページ5に含まれる内容の要旨
43-972.fm Page 5 Monday, August 16, 1999 4:19 PM This module has been tested and found to comply with all applicable UL and FCC standards. Important Information: • To use this module, you must be in an area where Caller ID service is available, and you must subscribe to the service. • Your module displays the caller’s name only if this feature is avail- able in your area. • The message received indicator flashes when you have voice mail only if this feature is available in your area and you s
ページ6に含まれる内容の要旨
43-972.fm Page 6 Monday, August 16, 1999 4:19 PM FCC INFORMATION We have designed your module to conform to federal regulations, and you can connect it to most telephone lines. However, each module (and each device, such as a telephone or answering machine) that you con- nect to the telephone line draws power from the line. We refer to this power draw as the module’s ringer equivalence number or REN. The REN is shown on the bottom of the module. If you use more than one telephone or other dev
ページ7に含まれる内容の要旨
43-972.fm Page 7 Monday, August 16, 1999 4:19 PM In the unlikely event that your module causes problems on the phone line, the phone company can temporarily disconnect your service. If this hap- pens, the phone company attempts to notify you in advance. If advance no- tice is not practical, the phone company notifies you as soon as possible and advises you of your right to file a complaint with the FCC. Also, the phone company can make changes to its lines, equipment, opera- tions, or procedu
ページ8に含まれる内容の要旨
43-972.fm Page 8 Monday, August 16, 1999 4:19 PM Consult your local RadioShack store if the problem continues. If your module is not performing as it should, check its connection to your phones and the phone lines. If you are unable to locate the prob- lem, take your module to your local RadioShack store for assistance. 8
ページ9に含まれる内容の要旨
43-972.fm Page 9 Monday, August 16, 1999 4:19 PM CONTENTS Preparation......................................................................................... 11 Connecting the Supplied AC Adapter........................................... 11 Installing/Replacing the Battery................................................... 12 Setting the Display Language....................................................... 16 Adjusting the Display Contrast ................................................
ページ10に含まれる内容の要旨
43-972.fm Page 10 Monday, August 16, 1999 4:19 PM Care and Maintenance...................................................................... 33 Lightning...................................................................................... 34 10
ページ11に含まれる内容の要旨
43-972.fm Page 11 Monday, August 16, 1999 4:19 PM PREPARATION CONNECTING THE SUPPLIED AC ADAPTER The supplied AC adapter provides power for the module. Please note that although the module displays a time and date when you connect power, the displayed time and date are incorrect until the phone compa- ny sends the correct time and date during the first call. Cautions: • Use only the supplied AC adapter. Even other adapters that have the same ratings as the recommended adapter might not work
ページ12に含まれる内容の要旨
43-972.fm Page 12 Monday, August 16, 1999 4:19 PM Follow these steps to connect the AC adapter. 1. Plug the AC adapter’s barrel plug into the module’s 9VDC jack. 2. Plug the AC adapter into a standard AC outlet. INSTALLING/REPLACING THE BATTERY The module uses a 9-volt battery to protect its memory if the power fails. We recommend you use an alkaline battery (such as RadioShack Cat. No. 23-553). 12
ページ13に含まれる内容の要旨
43-972.fm Page 13 Monday, August 16, 1999 4:19 PM Notes: • If AC power fails or if the AC adapter is disconnected, the module automatically tests the battery each time it receives a new call. When appears on the display or the display dims (even after you restore power), replace the battery. • You must install a fresh battery within 5 seconds after you remove the old one. Otherwise, you might lose the information stored in the module. Follow these steps to install or replace the battery. 1.
ページ14に含まれる内容の要旨
9VDC TO WALL TO PHONE 43-972.fm Page 14 Monday, August 16, 1999 4:19 PM 2. Use a coin or other flat object to turn the screw on the bottom of the module to OPEN, then slide off the battery compartment cover. 3. Remove and discard the old battery. Important: Do not press any buttons after you remove the battery. Doing so can delete all caller information from the module. 14 OPEN LOCK L1 OR L1/L2 L1 OR L1/L2 L2 L2 LOCK
ページ15に含まれる内容の要旨
9VDC TO WALL TO PHONE 43-972.fm Page 15 Monday, August 16, 1999 4:19 PM Caution: Always remove an old or weak battery. Batteries can leak chemicals that can damage electronic circuits. 4. Before the display dims, slide the fresh battery into the compart- ment as indicated by the polarity symbols (+ and –) marked inside. Caution: Do not force the battery into the compartment. 5. Replace the battery compartment cover and turn the screw on the bottom of the module to LOCK to secure it. Then reco
ページ16に含まれる内容の要旨
43-972.fm Page 16 Monday, August 16, 1999 4:19 PM SETTING THE DISPLAY LANGUAGE When you connect power to the module the first time, the module begins its start-up sequence. The message re- ceived indicator on the front of the mod- ESP FRA ENG ule lights, and a test screen and the total memory capacity appear on the DELETE REVIEW display. Then the module displays: To select Spanish, press DELETE. To select French, press REVIEW. To select English, press REVIEW . To change the language selectio
ページ17に含まれる内容の要旨
43-972.fm Page 17 Monday, August 16, 1999 4:19 PM ADJUSTING THE DISPLAY CONTRAST Follow these steps to adjust the display’s contrast for the best visibility. 1. Press and hold down DELETE. 2. While holding down DELETE, within 6 seconds, repeatedly press REVIEW to decrease the contrast or REVIEW to increase it. Caution: While reviewing call records, if you hold down DELETE for longer than 6 seconds without pressing a REVIEW button, the sys- tem deletes all caller information from its memory.
ページ18に含まれる内容の要旨
43-972.fm Page 18 Monday, August 16, 1999 4:19 PM CONNECTING TO THE PHONES/PHONE LINES The module connects to your phone(s) and the phone line(s) using four modular phone line connectors. You can connect your module between a two-line phone (or one or two one-line phones) and a two-line modular phone line jack (or two one-line jacks). To use all of the module’s features, you must connect it to two separate phone lines. Each of these lines must have its own phone number. If you do not have two
ページ19に含まれる内容の要旨
43-972.fm Page 19 Monday, August 16, 1999 4:19 PM Connecting to a Two-Line Phone and a Two-Line Phone Line Jack 9VDC Connecting to a Two-Line Phone and Two One-Line Jacks 9VDC 19
ページ20に含まれる内容の要旨
43-972.fm Page 20 Monday, August 16, 1999 4:19 PM Connecting to a One-Line Phone and a Two-Line Phone Line Jack 9VDC Connecting to Two One-Line Phones and a Two-Line Phone Line Jack 9VDC 20
