ページ1に含まれる内容の要旨
GR-AX1027
COMPACT VHS CAMCORDER
VIDEOCAMARA VHS COMPACTO
CÂMERA VHS COMPACT
GR-AX1027
Compact VHS
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
INSTRUÇÕES
ed in Japan
6MKV UN VP YU30052-536
* *
PORTUGUÊS ESPAÑOL ENGLISH
ページ2に含まれる内容の要旨
2 EN Dear Customer, Warning on lithium battery Thank you for purchasing the JVC Compact VHS The battery used in this device may present a camcorder. Before use, please read the safety fire or chemical burn hazard if mistreated. Do information and precautions contained in the not recharge, disassemble, heat above 100°C or following pages to ensure safe use of your new incinerate. camcorder. Replace battery with Panasonic (Matsushita Electric), Sanyo or Maxell CR2025; use of another battery may pr
ページ3に含まれる内容の要旨
EN 3 IMPORTANT PRODUCT ANTENNA INSTALLATION INSTRUCTIONS SAFETY INSTRUCTIONS 1. Outdoor Antenna Grounding Electrical energy can perform many useful func- If an outside antenna or cable system is connected tions. But improper use can result in potential to the product, be sure the antenna or cable system electrical shock or fire hazards. This product has is grounded so as to provide some protection been engineered and against voltage surges and built-up static charges. manufactured to assure your
ページ4に含まれる内容の要旨
4 EN USE SERVICING 1. Accessories 1. Servicing To avoid personal injury: If your product is not operating correctly or exhibits • Do not place this product on an unstable cart, a marked change in performance and you are stand, tripod, bracket or table. It may fall, causing unable to restore normal operation by following the serious injury to a child or adult, and serious detailed procedure in its operating instructions, do damage to the product. not attempt to service it yourself as opening or •
ページ5に含まれる内容の要旨
QUICK OPERATION GUIDE EN 5 SUPPLY POWER INSERTING A VIDEO CASSETTE Hook on. 1 EJECT 1 Push in. 2 3 PUSH 2 Insert. BATT. RELEASE Using the battery pack 1 Hook-on the battery pack's top end to the 1 Slide EJECT. camcorder. (Charging procedure, Z P. 8) 2 Insert a video cassette. 2 Push in the battery pack until it locks into 3 Press PUSH. place. (For more details, Z P. 13) To remove the battery pack Slide BATT. RELEASE and pull out the battery pack. PLAYBACK SHOOTING PLAY/PAUSE 3 REW 2 1 LENS CO
ページ6に含まれる内容の要旨
MAJOR FEATURES 6 EN REMEMBER Multi Function Control (Z pg. 22 – 35) The Logical Choice Digital Hyper Zoom (Z pg. 17) Zoom-in The only compact video W W W W cassettes that can be used with your VHS VCR* T T T T *with VHS Playpak Zoom-out Program AE with Special Z pg. 26) Effects ( Digital Image Stabilizer n Cinema n Sepia n Twilight n Sports Z pg. 22) ( n High Speed (1/2000 sec.) Shutter n Classic Film n Strobe n Slow Shutter Digital Wipes and Fades Z pg. 28) ( Random Assemble Editing c Blac
ページ7に含まれる内容の要旨
CONTENTS EN 7 GETTING STARTED 8 Power .......................................................................................................... 8 Clock (Lithium) Battery Removal/Insertion............................................................. 10 Viewfinder Adjustment .................................................................................... 10 Date/Time Setting ......................................................................................... 11 Tape Length Setting ......
ページ8に含まれる内容の要旨
GETTING STARTED 8 EN Power This camcorder’s 3-way power supply system lets you choose the most appropriate source of power. NOTES: c No function is available without power supply. c Use only specified power supply. c Do not use provided power supply units with other equipment. CHARGING THE BATTERY PACK CHG. (charge) indicator SUPPLY POWER Marks Connect the charger’s AC power cord to a wall 1 outlet. The power indicator lights. POWER To AC outlet indicator ATTACH BATTERY PACK Align the marks and
ページ9に含まれる内容の要旨
EN 9 **CHARGE MARKER A charge marker is provided on the battery pack to Charge marker help you remember whether it has been charged or not. Two colors are provided (red and black)—you choose which one means charged and which means discharged. NOTES: c The recording time per charge is affected by such factors as the time spent in Record/Standby mode and the frequency of zooming. It is safer to have spare battery packs. c Charging times noted on page 8 are for fully discharged battey pack, and dis
ページ10に含まれる内容の要旨
GETTING STARTED (cont.) 10 EN Clock (Lithium) Battery Insertion/Removal A This battery is necessary for clock operation and to perform date/time settings. SWITCH OFF POWER Switch off the unit’s power and remove the power 1 supply unit. OPEN COVER Open the clock battery compartment cover while 2 pressing the release tab. REMOVE BATTERY (when replacing) Insert a pointed, non-metallic object between the 3 battery and the compartment ( A ) and pull the battery out. INSERT BATTERY Ensuring the plus (
ページ11に含まれる内容の要旨
EN 11 Date/Time Setting Shooting mode selector FAR SELECT MODE Set the Power switch to “CAMERA”, and the + MENU 1 Shooting Mode selector to “PRESET”. ACCESS MAIN MENU SCREEN Press MENU. 2 SELECT FUNCTION Press – to move the highlight bar down to “Date/ NEAR 3 Time”, then press NEAR. The Set Date And Time – screen appears. SET DATE/TIME Press FAR or NEAR until the item you want to set 4 begins blinking, then press + or – to until the correct setting appears. •If you decide you want to return the
ページ12に含まれる内容の要旨
GETTING STARTED (cont.) 12 EN Tape Length Setting Shooting mode selector FAR SELECT MODE Set the Power switch to “CAMERA”, and the + MENU 1 Shooting Mode selector to “PRESET”. ACCESS MAIN MENU SCREEN Press MENU. 2 SELECT FUNCTION NEAR Press + or – to move the highlight bar to “Tape 3 Length”. – SET TAPE LENGTH Press FAR or NEAR to cycle through until the correct 4 setting appears (depending on the tape used). T20 = 20 minutes of recording time, T30 = 30 min., and T40 = 40 min. (when recording in
ページ13に含まれる内容の要旨
EN 13 Recording Mode Setting SP/EP Pressing SP/EP alternates the setting between SP 1 (standard play-provides higher picture and sound quality, better for dubbing) and EP (Extended Play- more economical, recording at 1/3 the speed of SP). NOTE: If the recording mode is switched during recording, the playback picture will be blurred at the switching point. Loading/Unloading A Cassette OPEN CASSETTE HOLDER Slide EJECT until the holder opens. Do not use force 1 to open. INSERT/REMOVE CASSETTE Make
ページ14に含まれる内容の要旨
GETTING STARTED (cont.) 14 EN Grip Adjustment EXPAND LOOP Separate the Velcro strip. 1 INSERT HAND Pass your right hand through the loop and grasp the 2 grip. ADJUST STRAP LENGTH Adjust so your thumb and fingers can easily operate 3 the Recording Start/Stop button and Power Zoom Recording Start/Stop button lever. Refasten the Velcro strip. Shoulder Strap Attachment ATTACH STRAP Following the illustration at left, thread the strap 1 through the top of the eyelet 1, then fold it back 1 and thread
ページ15に含まれる内容の要旨
30° 30° EN 15 Using The RM-V706U Remote Control Unit The RM-V706U full-function MBR (Multi-Brand Remote) can operate this camcorder from a distance as well as the basic operations (PLAY, STOP, PAUSE, FF, and REW) of your VCR. This remote control unit is useful when dubbing from the camcorder to your VCR, and it makes additional recording functions possible. Installing The Battery PULL OUT BATTERY HOLDER Infrared beam effective area Pull out while sliding the lock hole. 10° 1 Infrared beam INSERT
ページ16に含まれる内容の要旨
RECORDING Basic Recording 16 EN NOTE: LENS COVER You should already have performed the procedures listed SWITCH below. If not, do so before continuing. c Power (Z pg. 8) c Tape Length (Z pg. 12) c Recording Mode Setting (Z pg. 13) c Grip Adjustment (Z pg. 14) LOAD A CASSETTE Slide EJECT to open the cassette holder, then insert 1 the cassette with the label facing out. Press PUSH to POWER ensure the holder is closed and locked. Start/Stop The power indicator ENTER RECORD–STANDBY MODE Slide the L
ページ17に含まれる内容の要旨
RECORDING Basic Features EN 17 FEATURE: Zooming PURPOSE: To produce the zoom in/out effect, or Zoom-in an instantaneous change in image W W W W magnification. OPERATION: 28X Hyper zoom T T T T Digital circuitry doubles the maximum 14x magnification offered by optical zoom. Zoom-out 1) To zoom in, slide the Zoom Lever toward “T”. Zoom indicator bar 2) To zoom out, slide toward “W”. Shift Zoom W By digitally processing and Zoom level magnifying images, zooming is possible from 5 – 14 times the in
ページ18に含まれる内容の要旨
RECORDING Basic Features (cont.) 18 EN FEATURE: Index Code Marking PURPOSE: To give you automatic access to any selected point on a recording. Auto Marking and Manual Marking are available. OPERATION: Auto Marking An index code is marked to start the first recording after a cassette is inserted, as long as the Power switch is set to “CAMERA”. Manual Marking 1) Press VISS once to place the index code. INDEX blinks in the viewfinder during marking. START/STOP NOTE: c If VISS is pressed during Rec
ページ19に含まれる内容の要旨
EN 19 Video Light When natural lighting is too dim, you can brighten the scene by using the built-in video light. SET VIDEO LIGHT Set the LIGHT ON/AUTO/OFF as required. 1 ON : Always keeps the light on as long as the camcorder is turned on. AUTO : Automatically turns on the light when the camcorder senses insufficient lighting on LIGHT ON/AUTO/OFF the subject. OFF : Turns off the light. •The video light can be used with the camcorder’s power on. •It is recommended to set the white balance (Z pg.
ページ20に含まれる内容の要旨
RECORDING Advanced Features 20 EN Date/Time Insert This feature allows you to display the date and time in your viewfinder and on a connected TV. NOTE: You should already have performed the Date/Time Setting procedure (Z pg. 11). If you haven’t, do so before continuing. DISPLAY DISPLAY CHOOSE DISPLAY MODE Press DISPLAY during Record–Standby to cycle 1 through the available modes as shown in the illustration at left. NOTES: c The selected display can be recorded. DEC 25. 96 PM 3:29:43 c If yo
